findings section of a dissertation

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write a Results Section | Tips & Examples

How to Write a Results Section | Tips & Examples

Published on 27 October 2016 by Bas Swaen . Revised on 25 October 2022 by Tegan George.

A results section is where you report the main findings of the data collection and analysis you conducted for your thesis or dissertation . You should report all relevant results concisely and objectively, in a logical order. Don’t include subjective interpretations of why you found these results or what they mean – any evaluation should be saved for the discussion section .

Make your writing flawless in 1 upload

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

How to write a results section, reporting quantitative research results, reporting qualitative research results, results vs discussion vs conclusion, checklist: research results, frequently asked questions about results sections.

When conducting research, it’s important to report the results of your study prior to discussing your interpretations of it. This gives your reader a clear idea of exactly what you found and keeps the data itself separate from your subjective analysis.

Here are a few best practices:

• Your results should always be written in the past tense.
• While the length of this section depends on how much data you collected and analysed, it should be written as concisely as possible.
• Only include results that are directly relevant to answering your research questions . Avoid speculative or interpretative words like ‘appears’ or ‘implies’.
• If you have other results you’d like to include, consider adding them to an appendix or footnotes.
• Always start out with your broadest results first, and then flow into your more granular (but still relevant) ones. Think of it like a shoe shop: first discuss the shoes as a whole, then the trainers, boots, sandals, etc.

Prevent plagiarism, run a free check.

If you conducted quantitative research , you’ll likely be working with the results of some sort of statistical analysis .

Your results section should report the results of any statistical tests you used to compare groups or assess relationships between variables . It should also state whether or not each hypothesis was supported.

The most logical way to structure quantitative results is to frame them around your research questions or hypotheses. For each question or hypothesis, share:

• A reminder of the type of analysis you used (e.g., a two-sample t test or simple linear regression ). A more detailed description of your analysis should go in your methodology section.
• A concise summary of each relevant result, both positive and negative. This can include any relevant descriptive statistics (e.g., means and standard deviations ) as well as inferential statistics (e.g., t scores, degrees of freedom , and p values ). Remember, these numbers are often placed in parentheses.
• A brief statement of how each result relates to the question, or whether the hypothesis was supported. You can briefly mention any results that didn’t fit with your expectations and assumptions, but save any speculation on their meaning or consequences for your discussion  and conclusion.

A note on tables and figures

In quantitative research, it’s often helpful to include visual elements such as graphs, charts, and tables , but only if they are directly relevant to your results. Give these elements clear, descriptive titles and labels so that your reader can easily understand what is being shown. If you want to include any other visual elements that are more tangential in nature, consider adding a figure and table list .

As a rule of thumb:

• Tables are used to communicate exact values, giving a concise overview of various results
• Graphs and charts are used to visualise trends and relationships, giving an at-a-glance illustration of key findings

Don’t forget to also mention any tables and figures you used within the text of your results section. Summarise or elaborate on specific aspects you think your reader should know about rather than merely restating the same numbers already shown.

Figure 1: Intention to donate to environmental organisations based on social distance from impact of environmental damage.

In qualitative research , your results might not all be directly related to specific hypotheses. In this case, you can structure your results section around key themes or topics that emerged from your analysis of the data.

For each theme, start with general observations about what the data showed. You can mention:

• Recurring points of agreement or disagreement
• Patterns and trends
• Particularly significant snippets from individual responses

Next, clarify and support these points with direct quotations. Be sure to report any relevant demographic information about participants. Further information (such as full transcripts , if appropriate) can be included in an appendix .

‘I think that in role-playing games, there’s more attention to character design, to world design, because the whole story is important and more attention is paid to certain game elements […] so that perhaps you do need bigger teams of creative experts than in an average shooter or something.’

Responses suggest that video game consumers consider some types of games to have more artistic potential than others.

Your results section should objectively report your findings, presenting only brief observations in relation to each question, hypothesis, or theme.

It should not  speculate about the meaning of the results or attempt to answer your main research question . Detailed interpretation of your results is more suitable for your discussion section , while synthesis of your results into an overall answer to your main research question is best left for your conclusion .

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Upload my document

I have completed my data collection and analyzed the results.

I have included all results that are relevant to my research questions.

I have concisely and objectively reported each result, including relevant descriptive statistics and inferential statistics .

I have stated whether each hypothesis was supported or refuted.

I have used tables and figures to illustrate my results where appropriate.

All tables and figures are correctly labelled and referred to in the text.

There is no subjective interpretation or speculation on the meaning of the results.

You've finished writing up your results! Use the other checklists to further improve your thesis.

The results chapter of a thesis or dissertation presents your research results concisely and objectively.

In quantitative research , for each question or hypothesis , state:

• The type of analysis used
• Relevant results in the form of descriptive and inferential statistics
• Whether or not the alternative hypothesis was supported

In qualitative research , for each question or theme, describe:

• Recurring patterns
• Significant or representative individual responses
• Relevant quotations from the data

Don’t interpret or speculate in the results chapter.

Results are usually written in the past tense , because they are describing the outcome of completed actions.

The results chapter or section simply and objectively reports what you found, without speculating on why you found these results. The discussion interprets the meaning of the results, puts them in context, and explains why they matter.

In qualitative research , results and discussion are sometimes combined. But in quantitative research , it’s considered important to separate the objective results from your interpretation of them.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

Swaen, B. (2022, October 25). How to Write a Results Section | Tips & Examples. Scribbr. Retrieved 18 November 2024, from https://www.scribbr.co.uk/thesis-dissertation/results-section/

Is this article helpful?

Other students also liked

What is a research methodology | steps & tips, how to write a discussion section | tips & examples, how to write a thesis or dissertation conclusion.

• How it works

"Christmas Offer"

Terms & conditions.

As the Christmas season is upon us, we find ourselves reflecting on the past year and those who we have helped to shape their future. It’s been quite a year for us all! The end of the year brings no greater joy than the opportunity to express to you Christmas greetings and good wishes.

At this special time of year, Research Prospect brings joyful discount of 10% on all its services. May your Christmas and New Year be filled with joy.

We are looking back with appreciation for your loyalty and looking forward to moving into the New Year together.

"Claim this offer"

In unfamiliar and hard times, we have stuck by you. This Christmas, Research Prospect brings you all the joy with exciting discount of 10% on all its services.

Offer valid till 5-1-2024

We love being your partner in success. We know you have been working hard lately, take a break this holiday season to spend time with your loved ones while we make sure you succeed in your academics

Discount code: RP0996Y

How to Structure a Dissertation – A Step by Step Guide

Published by Owen Ingram at August 11th, 2021 , Revised On September 20, 2023

A dissertation – sometimes called a thesis –  is a long piece of information backed up by extensive research. This one, huge piece of research is what matters the most when students – undergraduates and postgraduates – are in their final year of study.

On the other hand, some institutions, especially in the case of undergraduate students, may or may not require students to write a dissertation. Courses are offered instead. This generally depends on the requirements of that particular institution.

If you are unsure about how to structure your dissertation or thesis, this article will offer you some guidelines to work out what the most important segments of a dissertation paper are and how you should organise them. Why is structure so important in research, anyway?

One way to answer that, as Abbie Hoffman aptly put it, is because: “Structure is more important than content in the transmission of information.”

Also Read:   How to write a dissertation – step by step guide .

How to Structure a Dissertation or Thesis

It should be noted that the exact structure of your dissertation will depend on several factors, such as:

• Your research approach (qualitative/quantitative)
• The nature of your research design (exploratory/descriptive etc.)
• The requirements set for forth by your academic institution.
• The discipline or field your study belongs to. For instance, if you are a humanities student, you will need to develop your dissertation on the same pattern as any long essay .

This will include developing an overall argument to support the thesis statement and organizing chapters around theories or questions. The dissertation will be structured such that it starts with an introduction , develops on the main idea in its main body paragraphs and is then summarised in conclusion .

However, if you are basing your dissertation on primary or empirical research, you will be required to include each of the below components. In most cases of dissertation writing, each of these elements will have to be written as a separate chapter.

But depending on the word count you are provided with and academic subject, you may choose to combine some of these elements.

For example, sciences and engineering students often present results and discussions together in one chapter rather than two different chapters.

If you have any doubts about structuring your dissertation or thesis, it would be a good idea to consult with your academic supervisor and check your department’s requirements.

Parts of  a Dissertation or Thesis

Your dissertation will  start with a t itle page that will contain details of the author/researcher, research topic, degree program (the paper is to be submitted for), and research supervisor. In other words, a title page is the opening page containing all the names and title related to your research.

The name of your university, logo, student ID and submission date can also be presented on the title page. Many academic programs have stringent rules for formatting the dissertation title page.

Acknowledgements

The acknowledgments section allows you to thank those who helped you with your dissertation project. You might want to mention the names of your academic supervisor, family members, friends, God, and participants of your study whose contribution and support enabled you to complete your work.

However, the acknowledgments section is usually optional.

Tip: Many students wrongly assume that they need to thank everyone…even those who had little to no contributions towards the dissertation. This is not the case. You only need to thank those who were directly involved in the research process, such as your participants/volunteers, supervisor(s) etc.

Perhaps the smallest yet important part of a thesis, an abstract contains 5 parts:

• A brief introduction of your research topic.
• The significance of your research.
•  A line or two about the methodology that was used.
• The results and what they mean (briefly); their interpretation(s).
• And lastly, a conclusive comment regarding the results’ interpretation(s) as conclusion .

Stuck on a difficult dissertation? We can help!

Our Essay Writing Service Features:

• Expert UK Writers
• Plagiarism-free
• Timely Delivery
• Thorough Research
• Rigorous Quality Control

“ Our expert dissertation writers can help you with all stages of the dissertation writing process including topic research and selection, dissertation plan, dissertation proposal , methodology , statistical analysis , primary and secondary research, findings and analysis and complete dissertation writing. “

Tip: Make sure to highlight key points to help readers figure out the scope and findings of your research study without having to read the entire dissertation. The abstract is your first chance to impress your readers. So, make sure to get it right. Here are detailed guidelines on how to write abstract for dissertation .

Table of Contents

Table of contents is the section of a dissertation that guides each section of the dissertation paper’s contents. Depending on the level of detail in a table of contents, the most useful headings are listed to provide the reader the page number on which said information may be found at.

Table of contents can be inserted automatically as well as manually using the Microsoft Word Table of Contents feature.

List of Figures and Tables

If your dissertation paper uses several illustrations, tables and figures, you might want to present them in a numbered list in a separate section . Again, this list of tables and figures can be auto-created and auto inserted using the Microsoft Word built-in feature.

List of Abbreviations

Dissertations that include several abbreviations can also have an independent and separate alphabetised  list of abbreviations so readers can easily figure out their meanings.

If you think you have used terms and phrases in your dissertation that readers might not be familiar with, you can create a  glossary  that lists important phrases and terms with their meanings explained.

Looking for dissertation help?

Researchprospect to the rescue then.

We have expert writers on our team who are skilled at helping students with quantitative dissertations across a variety of STEM disciplines. Guaranteeing 100% satisfaction!

Introduction

Introduction chapter  briefly introduces the purpose and relevance of your research topic.

Here, you will be expected to list the aim and key objectives of your research so your readers can easily understand what the following chapters of the dissertation will cover. A good dissertation introduction section incorporates the following information:

• It provides background information to give context to your research.
• It clearly specifies the research problem you wish to address with your research. When creating research questions , it is important to make sure your research’s focus and scope are neither too broad nor too narrow.
• it demonstrates how your research is relevant and how it would contribute to the existing knowledge.
• It provides an overview of the structure of your dissertation. The last section of an introduction contains an outline of the following chapters. It could start off with something like: “In the following chapter, past literature has been reviewed and critiqued. The proceeding section lays down major research findings…”
• Theoretical framework – under a separate sub-heading – is also provided within the introductory chapter. Theoretical framework deals with the basic, underlying theory or theories that the research revolves around.

All the information presented under this section should be relevant, clear, and engaging. The readers should be able to figure out the what, why, when, and how of your study once they have read the introduction. Here are comprehensive guidelines on how to structure the introduction to the dissertation .

“Overwhelmed by tight deadlines and tons of assignments to write? There is no need to panic! Our expert academics can help you with every aspect of your dissertation – from topic creation and research problem identification to choosing the methodological approach and data analysis.”

Literature Review 

The  literature review chapter  presents previous research performed on the topic and improves your understanding of the existing literature on your chosen topic. This is usually organised to complement your  primary research  work completed at a later stage.

Make sure that your chosen academic sources are authentic and up-to-date. The literature review chapter must be comprehensive and address the aims and objectives as defined in the introduction chapter. Here is what your literature research chapter should aim to achieve:

• Data collection from authentic and relevant academic sources such as books, journal articles and research papers.
• Analytical assessment of the information collected from those sources; this would involve a critiquing the reviewed researches that is, what their strengths/weaknesses are, why the research method they employed is better than others, importance of their findings, etc.
• Identifying key research gaps, conflicts, patterns, and theories to get your point across to the reader effectively.

While your literature review should summarise previous literature, it is equally important to make sure that you develop a comprehensible argument or structure to justify your research topic. It would help if you considered keeping the following questions in mind when writing the literature review:

• How does your research work fill a certain gap in exiting literature?
• Did you adopt/adapt a new research approach to investigate the topic?
• Does your research solve an unresolved problem?
• Is your research dealing with some groundbreaking topic or theory that others might have overlooked?
• Is your research taking forward an existing theoretical discussion?
• Does your research strengthen and build on current knowledge within your area of study? This is otherwise known as ‘adding to the existing body of knowledge’ in academic circles.

Tip: You might want to establish relationships between variables/concepts to provide descriptive answers to some or all of your research questions. For instance, in case of quantitative research, you might hypothesise that variable A is positively co-related to variable B that is, one increases and so does the other one.

Research Methodology

The methods and techniques ( secondary and/or primar y) employed to collect research data are discussed in detail in the  Methodology chapter. The most commonly used primary data collection methods are:

• questionnaires
• focus groups
• observations

Essentially, the methodology chapter allows the researcher to explain how he/she achieved the findings, why they are reliable and how they helped him/her test the research hypotheses or address the research problem.

You might want to consider the following when writing methodology for the dissertation:

• Type of research and approach your work is based on. Some of the most widely used types of research include experimental, quantitative and qualitative methodologies.
• Data collection techniques that were employed such as questionnaires, surveys, focus groups, observations etc.
• Details of how, when, where, and what of the research that was conducted.
• Data analysis strategies employed (for instance, regression analysis).
• Software and tools used for data analysis (Excel, STATA, SPSS, lab equipment, etc.).
• Research limitations to highlight any hurdles you had to overcome when carrying our research. Limitations might or might not be mentioned within research methodology. Some institutions’ guidelines dictate they be mentioned under a separate section alongside recommendations.
• Justification of your selection of research approach and research methodology.

Here is a comprehensive article on  how to structure a dissertation methodology .

Research Findings

In this section, you present your research findings. The dissertation findings chapter  is built around the research questions, as outlined in the introduction chapter. Report findings that are directly relevant to your research questions.

Any information that is not directly relevant to research questions or hypotheses but could be useful for the readers can be placed under the  Appendices .

As indicated above, you can either develop a  standalone chapter  to present your findings or combine them with the discussion chapter. This choice depends on  the type of research involved and the academic subject, as well as what your institution’s academic guidelines dictate.

For example, it is common to have both findings and discussion grouped under the same section, particularly if the dissertation is based on qualitative research data.

On the other hand, dissertations that use quantitative or experimental data should present findings and analysis/discussion in two separate chapters. Here are some sample dissertations to help you figure out the best structure for your own project.

Sample Dissertation

Tip: Try to present as many charts, graphs, illustrations and tables in the findings chapter to improve your data presentation. Provide their qualitative interpretations alongside, too. Refrain from explaining the information that is already evident from figures and tables.

The findings are followed by the  Discussion chapter , which is considered the heart of any dissertation paper. The discussion section is an opportunity for you to tie the knots together to address the research questions and present arguments, models and key themes.

This chapter can make or break your research.

The discussion chapter does not require any new data or information because it is more about the interpretation(s) of the data you have already collected and presented. Here are some questions for you to think over when writing the discussion chapter:

• Did your work answer all the research questions or tested the hypothesis?
• Did you come up with some unexpected results for which you have to provide an additional explanation or justification?
• Are there any limitations that could have influenced your research findings?

Here is an article on how to  structure a dissertation discussion .

Conclusions corresponding to each research objective are provided in the  Conclusion section . This is usually done by revisiting the research questions to finally close the dissertation. Some institutions may specifically ask for recommendations to evaluate your critical thinking.

By the end, the readers should have a clear apprehension of your fundamental case with a focus on  what methods of research were employed  and what you achieved from this research.

Quick Question: Does the conclusion chapter reflect on the contributions your research work will make to existing knowledge?

Answer: Yes, the conclusion chapter of the research paper typically includes a reflection on the research’s contributions to existing knowledge.  In the “conclusion chapter”, you have to summarise the key findings and discuss how they add value to the existing literature on the current topic.

Reference list

All academic sources that you collected information from should be cited in-text and also presented in a  reference list (or a bibliography in case you include references that you read for the research but didn’t end up citing in the text), so the readers can easily locate the source of information when/if needed.

At most UK universities, Harvard referencing is the recommended style of referencing. It has strict and specific requirements on how to format a reference resource. Other common styles of referencing include MLA, APA, Footnotes, etc.

Each chapter of the dissertation should have relevant information. Any information that is not directly relevant to your research topic but your readers might be interested in (interview transcripts etc.) should be moved under the Appendices section .

Things like questionnaires, survey items or readings that were used in the study’s experiment are mostly included under appendices.

An Outline of Dissertation/Thesis Structure

How can We Help you with your Dissertation?

If you are still unsure about how to structure a dissertation or thesis, or simply lack the motivation to kick start your dissertation project, you might be interested in our dissertation services .

If you are still unsure about how to structure a dissertation or thesis, or lack the motivation to kick start your dissertation project, you might be interested in our dissertation services.

Whether you need help with individual chapters, proposals or the full dissertation paper, we have PhD-qualified writers who will write your paper to the highest academic standard. ResearchProspect is UK-based, and a UK-registered business, which means the UK consumer law protects all our clients.

All You Need to Know About Us Learn More About Our Dissertation Services

FAQs About Structure a Dissertation

What does the title page of a dissertation contain.

The title page will contain details of the author/researcher, research topic , degree program (the paper is to be submitted for) and research supervisor’s name(s). The name of your university, logo, student number and submission date can also be presented on the title page.

What is the purpose of adding acknowledgement?

The acknowledgements section allows you to thank those who helped you with your dissertation project. You might want to mention the names of your academic supervisor, family members, friends, God and participants of your study whose contribution and support enabled you to complete your work.

Can I omit the glossary from the dissertation?

Yes, but only if you think that your paper does not contain any terms or phrases that the reader might not understand. If you think you have used them in the paper,  you must create a glossary that lists important phrases and terms with their meanings explained.

What is the purpose of appendices in a dissertation?

Any information that is not directly relevant to research questions or hypotheses but could be useful for the readers can be placed under the Appendices, such as questionnaire that was used in the study.

Which referencing style should I use in my dissertation?

You can use any of the referencing styles such as APA, MLA, and Harvard, according to the recommendation of your university; however, almost all UK institutions prefer Harvard referencing style .

What is the difference between references and bibliography?

References contain all the works that you read up and used and therefore, cited within the text of your thesis. However, in case you read on some works and resources that you didn’t end up citing in-text, they will be referenced in what is called a bibliography.

Additional readings might also be present alongside each bibliography entry for readers.

You May Also Like

Do dissertations scare you? Struggling with writing a flawless dissertation? Well, congratulations, you have landed in the perfect place. In this blog, we will take you through the detailed process of writing a dissertation. Sounds fun? We thought so!

Your dissertation introduction chapter provides detailed information on the research problem, significance of research, and research aim & objectives.

Make sure to develop a conceptual framework before conducting research. Here is all you need to know about what is a conceptual framework is in a dissertation?

As Featured On

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

Splash Sol LLC

• How It Works

Work With Us

Private Coaching

Done-For-You

Short Courses

Client Reviews

Free Resources

How To Write The Results/Findings Chapter

By: Derek Jansen (MBA) | Expert Reviewed By: Kerryn Warren (PhD) | July 2021

Overview: Quantitative Results Chapter

• What exactly the results chapter is
• What you need to include in your chapter
• How to structure the chapter
• Tips and tricks for writing a top-notch chapter
• Free results chapter template

What exactly is the results chapter?

The results chapter (also referred to as the findings or analysis chapter) is one of the most important chapters of your dissertation or thesis because it shows the reader what you’ve found in terms of the quantitative data you’ve collected. It presents the data using a clear text narrative, supported by tables, graphs and charts. In doing so, it also highlights any potential issues (such as outliers or unusual findings) you’ve come across.

But how’s that different from the discussion chapter?

Well, in the results chapter, you only present your statistical findings. Only the numbers, so to speak – no more, no less. Contrasted to this, in the discussion chapter , you interpret your findings and link them to prior research (i.e. your literature review), as well as your research objectives and research questions . In other words, the results chapter presents and describes the data, while the discussion chapter interprets the data.

Let’s look at an example.

In your results chapter, you may have a plot that shows how respondents to a survey  responded: the numbers of respondents per category, for instance. You may also state whether this supports a hypothesis by using a p-value from a statistical test. But it is only in the discussion chapter where you will say why this is relevant or how it compares with the literature or the broader picture. So, in your results chapter, make sure that you don’t present anything other than the hard facts – this is not the place for subjectivity.

It’s worth mentioning that some universities prefer you to combine the results and discussion chapters. Even so, it is good practice to separate the results and discussion elements within the chapter, as this ensures your findings are fully described. Typically, though, the results and discussion chapters are split up in quantitative studies. If you’re unsure, chat with your research supervisor or chair to find out what their preference is.

What should you include in the results chapter?

Following your analysis, it’s likely you’ll have far more data than are necessary to include in your chapter. In all likelihood, you’ll have a mountain of SPSS or R output data, and it’s your job to decide what’s most relevant. You’ll need to cut through the noise and focus on the data that matters.

This doesn’t mean that those analyses were a waste of time – on the contrary, those analyses ensure that you have a good understanding of your dataset and how to interpret it. However, that doesn’t mean your reader or examiner needs to see the 165 histograms you created! Relevance is key.

How do I decide what’s relevant?

At this point, it can be difficult to strike a balance between what is and isn’t important. But the most important thing is to ensure your results reflect and align with the purpose of your study .  So, you need to revisit your research aims, objectives and research questions and use these as a litmus test for relevance. Make sure that you refer back to these constantly when writing up your chapter so that you stay on track.

As a general guide, your results chapter will typically include the following:

• Some demographic data about your sample
• Reliability tests (if you used measurement scales)
• Descriptive statistics
• Inferential statistics (if your research objectives and questions require these)
• Hypothesis tests (again, if your research objectives and questions require these)

We’ll discuss each of these points in more detail in the next section.

Importantly, your results chapter needs to lay the foundation for your discussion chapter . This means that, in your results chapter, you need to include all the data that you will use as the basis for your interpretation in the discussion chapter.

For example, if you plan to highlight the strong relationship between Variable X and Variable Y in your discussion chapter, you need to present the respective analysis in your results chapter – perhaps a correlation or regression analysis.

Need a helping hand?

How do I write the results chapter?

There are multiple steps involved in writing up the results chapter for your quantitative research. The exact number of steps applicable to you will vary from study to study and will depend on the nature of the research aims, objectives and research questions . However, we’ll outline the generic steps below.

Step 1 – Revisit your research questions

The first step in writing your results chapter is to revisit your research objectives and research questions . These will be (or at least, should be!) the driving force behind your results and discussion chapters, so you need to review them and then ask yourself which statistical analyses and tests (from your mountain of data) would specifically help you address these . For each research objective and research question, list the specific piece (or pieces) of analysis that address it.

At this stage, it’s also useful to think about the key points that you want to raise in your discussion chapter and note these down so that you have a clear reminder of which data points and analyses you want to highlight in the results chapter. Again, list your points and then list the specific piece of analysis that addresses each point.

Next, you should draw up a rough outline of how you plan to structure your chapter . Which analyses and statistical tests will you present and in what order? We’ll discuss the “standard structure” in more detail later, but it’s worth mentioning now that it’s always useful to draw up a rough outline before you start writing (this advice applies to any chapter).

Step 2 – Craft an overview introduction

As with all chapters in your dissertation or thesis, you should start your quantitative results chapter by providing a brief overview of what you’ll do in the chapter and why . For example, you’d explain that you will start by presenting demographic data to understand the representativeness of the sample, before moving onto X, Y and Z.

This section shouldn’t be lengthy – a paragraph or two maximum. Also, it’s a good idea to weave the research questions into this section so that there’s a golden thread that runs through the document.

Step 3 – Present the sample demographic data

The first set of data that you’ll present is an overview of the sample demographics – in other words, the demographics of your respondents.

For example:

• What age range are they?
• How is gender distributed?
• How is ethnicity distributed?
• What areas do the participants live in?

The purpose of this is to assess how representative the sample is of the broader population. This is important for the sake of the generalisability of the results. If your sample is not representative of the population, you will not be able to generalise your findings. This is not necessarily the end of the world, but it is a limitation you’ll need to acknowledge.

Of course, to make this representativeness assessment, you’ll need to have a clear view of the demographics of the population. So, make sure that you design your survey to capture the correct demographic information that you will compare your sample to.

But what if I’m not interested in generalisability?

Well, even if your purpose is not necessarily to extrapolate your findings to the broader population, understanding your sample will allow you to interpret your findings appropriately, considering who responded. In other words, it will help you contextualise your findings . For example, if 80% of your sample was aged over 65, this may be a significant contextual factor to consider when interpreting the data. Therefore, it’s important to understand and present the demographic data.

 Step 4 – Review composite measures and the data “shape”.

Before you undertake any statistical analysis, you’ll need to do some checks to ensure that your data are suitable for the analysis methods and techniques you plan to use. If you try to analyse data that doesn’t meet the assumptions of a specific statistical technique, your results will be largely meaningless. Therefore, you may need to show that the methods and techniques you’ll use are “allowed”.

Most commonly, there are two areas you need to pay attention to:

#1: Composite measures

The first is when you have multiple scale-based measures that combine to capture one construct – this is called a composite measure .  For example, you may have four Likert scale-based measures that (should) all measure the same thing, but in different ways. In other words, in a survey, these four scales should all receive similar ratings. This is called “ internal consistency ”.

Internal consistency is not guaranteed though (especially if you developed the measures yourself), so you need to assess the reliability of each composite measure using a test. Typically, Cronbach’s Alpha is a common test used to assess internal consistency – i.e., to show that the items you’re combining are more or less saying the same thing. A high alpha score means that your measure is internally consistent. A low alpha score means you may need to consider scrapping one or more of the measures.

#2: Data shape

The second matter that you should address early on in your results chapter is data shape. In other words, you need to assess whether the data in your set are symmetrical (i.e. normally distributed) or not, as this will directly impact what type of analyses you can use. For many common inferential tests such as T-tests or ANOVAs (we’ll discuss these a bit later), your data needs to be normally distributed. If it’s not, you’ll need to adjust your strategy and use alternative tests.

To assess the shape of the data, you’ll usually assess a variety of descriptive statistics (such as the mean, median and skewness), which is what we’ll look at next.

Step 5 – Present the descriptive statistics

Now that you’ve laid the foundation by discussing the representativeness of your sample, as well as the reliability of your measures and the shape of your data, you can get started with the actual statistical analysis. The first step is to present the descriptive statistics for your variables.

For scaled data, this usually includes statistics such as:

• The mean – this is simply the mathematical average of a range of numbers.
• The median – this is the midpoint in a range of numbers when the numbers are arranged in order.
• The mode – this is the most commonly repeated number in the data set.
• Standard deviation – this metric indicates how dispersed a range of numbers is. In other words, how close all the numbers are to the mean (the average).
• Skewness – this indicates how symmetrical a range of numbers is. In other words, do they tend to cluster into a smooth bell curve shape in the middle of the graph (this is called a normal or parametric distribution), or do they lean to the left or right (this is called a non-normal or non-parametric distribution).
• Kurtosis – this metric indicates whether the data are heavily or lightly-tailed, relative to the normal distribution. In other words, how peaked or flat the distribution is.

A large table that indicates all the above for multiple variables can be a very effective way to present your data economically. You can also use colour coding to help make the data more easily digestible.

For categorical data, where you show the percentage of people who chose or fit into a category, for instance, you can either just plain describe the percentages or numbers of people who responded to something or use graphs and charts (such as bar graphs and pie charts) to present your data in this section of the chapter.

When using figures, make sure that you label them simply and clearly , so that your reader can easily understand them. There’s nothing more frustrating than a graph that’s missing axis labels! Keep in mind that although you’ll be presenting charts and graphs, your text content needs to present a clear narrative that can stand on its own. In other words, don’t rely purely on your figures and tables to convey your key points: highlight the crucial trends and values in the text. Figures and tables should complement the writing, not carry it .

Depending on your research aims, objectives and research questions, you may stop your analysis at this point (i.e. descriptive statistics). However, if your study requires inferential statistics, then it’s time to deep dive into those .

Step 6 – Present the inferential statistics

Inferential statistics are used to make generalisations about a population , whereas descriptive statistics focus purely on the sample . Inferential statistical techniques, broadly speaking, can be broken down into two groups .

First, there are those that compare measurements between groups , such as t-tests (which measure differences between two groups) and ANOVAs (which measure differences between multiple groups). Second, there are techniques that assess the relationships between variables , such as correlation analysis and regression analysis. Within each of these, some tests can be used for normally distributed (parametric) data and some tests are designed specifically for use on non-parametric data.

There are a seemingly endless number of tests that you can use to crunch your data, so it’s easy to run down a rabbit hole and end up with piles of test data. Ultimately, the most important thing is to make sure that you adopt the tests and techniques that allow you to achieve your research objectives and answer your research questions .

In this section of the results chapter, you should try to make use of figures and visual components as effectively as possible. For example, if you present a correlation table, use colour coding to highlight the significance of the correlation values, or scatterplots to visually demonstrate what the trend is. The easier you make it for your reader to digest your findings, the more effectively you’ll be able to make your arguments in the next chapter.

Step 7 – Test your hypotheses

If your study requires it, the next stage is hypothesis testing. A hypothesis is a statement , often indicating a difference between groups or relationship between variables, that can be supported or rejected by a statistical test. However, not all studies will involve hypotheses (again, it depends on the research objectives), so don’t feel like you “must” present and test hypotheses just because you’re undertaking quantitative research.

The basic process for hypothesis testing is as follows:

• Specify your null hypothesis (for example, “The chemical psilocybin has no effect on time perception).
• Specify your alternative hypothesis (e.g., “The chemical psilocybin has an effect on time perception)
• Set your significance level (this is usually 0.05)
• Calculate your statistics and find your p-value (e.g., p=0.01)
• Draw your conclusions (e.g., “The chemical psilocybin does have an effect on time perception”)

Finally, if the aim of your study is to develop and test a conceptual framework , this is the time to present it, following the testing of your hypotheses. While you don’t need to develop or discuss these findings further in the results chapter, indicating whether the tests (and their p-values) support or reject the hypotheses is crucial.

Step 8 – Provide a chapter summary

To wrap up your results chapter and transition to the discussion chapter, you should provide a brief summary of the key findings . “Brief” is the keyword here – much like the chapter introduction, this shouldn’t be lengthy – a paragraph or two maximum. Highlight the findings most relevant to your research objectives and research questions, and wrap it up.

Some final thoughts, tips and tricks

Now that you’ve got the essentials down, here are a few tips and tricks to make your quantitative results chapter shine:

• When writing your results chapter, report your findings in the past tense . You’re talking about what you’ve found in your data, not what you are currently looking for or trying to find.
• Structure your results chapter systematically and sequentially . If you had two experiments where findings from the one generated inputs into the other, report on them in order.
• Make your own tables and graphs rather than copying and pasting them from statistical analysis programmes like SPSS. Check out the DataIsBeautiful reddit for some inspiration.
• Once you’re done writing, review your work to make sure that you have provided enough information to answer your research questions , but also that you didn’t include superfluous information.

If you’ve got any questions about writing up the quantitative results chapter, please leave a comment below. If you’d like 1-on-1 assistance with your quantitative analysis and discussion, check out our hands-on coaching service , or book a free consultation with a friendly coach.

Learn More About Quantitative:

Triangulation: The Ultimate Credibility Enhancer

Triangulation is one of the best ways to enhance the credibility of your research. Learn about the different options here.

Inferential Statistics 101: Simple Explainer (With Examples)

Learn about the key concepts and tests within inferential statistics, including t-tests, ANOVA, chi-square, correlation and regression.

Descriptive Statistics 101: Simple Explainer (With Examples)

Learn about the key concepts and measures within descriptive statistics, including measures of central tendency and dispersion.

Validity & Reliability: Explained Simply

Learn about validity and reliability within the context of research methodology. Plain-language explainer video with loads of examples.

Research Design 101: Qualitative & Quantitative

Learn about research design for both qualitative and quantitative studies. Includes plain-language explanations and examples.

📄 FREE TEMPLATES

Research Topic Ideation

Proposal Writing

Literature Review

Methodology & Analysis

Academic Writing

Referencing & Citing

Apps, Tools & Tricks

The Grad Coach Podcast

Thank you. I will try my best to write my results.

Awesome content 👏🏾

this was great explaination

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Submit Comment

• Print Friendly

• Affiliate Program

• UNITED STATES
• 台灣 (TAIWAN)
• TÜRKIYE (TURKEY)
• Academic Editing Services
• - Research Paper
• - Journal Manuscript
• - Dissertation
• - College & University Assignments
• Admissions Editing Services
• - Application Essay
• - Personal Statement
• - Recommendation Letter
• - Cover Letter
• - CV/Resume
• Business Editing Services
• - Business Documents
• - Report & Brochure
• - Website & Blog
• Writer Editing Services
• - Script & Screenplay
• Our Editors
• Client Reviews
• Editing & Proofreading Prices
• Wordvice Points
• Partner Discount
• Plagiarism Checker
• APA Citation Generator
• MLA Citation Generator
• Chicago Citation Generator
• Vancouver Citation Generator
• - APA Style
• - MLA Style
• - Chicago Style
• - Vancouver Style
• Writing & Editing Guide
• Academic Resources
• Admissions Resources

How to Write the Results/Findings Section in Research

What is the research paper Results section and what does it do?

The Results section of a scientific research paper represents the core findings of a study derived from the methods applied to gather and analyze information. It presents these findings in a logical sequence without bias or interpretation from the author, setting up the reader for later interpretation and evaluation in the Discussion section. A major purpose of the Results section is to break down the data into sentences that show its significance to the research question(s).

The Results section appears third in the section sequence in most scientific papers. It follows the presentation of the Methods and Materials and is presented before the Discussion section —although the Results and Discussion are presented together in many journals. This section answers the basic question “What did you find in your research?”

What is included in the Results section?

The Results section should include the findings of your study and ONLY the findings of your study. The findings include:

• Data presented in tables, charts, graphs, and other figures (may be placed into the text or on separate pages at the end of the manuscript)
• A contextual analysis of this data explaining its meaning in sentence form
• All data that corresponds to the central research question(s)
• All secondary findings (secondary outcomes, subgroup analyses, etc.)

If the scope of the study is broad, or if you studied a variety of variables, or if the methodology used yields a wide range of different results, the author should present only those results that are most relevant to the research question stated in the Introduction section .

As a general rule, any information that does not present the direct findings or outcome of the study should be left out of this section. Unless the journal requests that authors combine the Results and Discussion sections, explanations and interpretations should be omitted from the Results.

How are the results organized?

The best way to organize your Results section is “logically.” One logical and clear method of organizing research results is to provide them alongside the research questions—within each research question, present the type of data that addresses that research question.

Let’s look at an example. Your research question is based on a survey among patients who were treated at a hospital and received postoperative care. Let’s say your first research question is:

“What do hospital patients over age 55 think about postoperative care?”

This can actually be represented as a heading within your Results section, though it might be presented as a statement rather than a question:

Attitudes towards postoperative care in patients over the age of 55

Now present the results that address this specific research question first. In this case, perhaps a table illustrating data from a survey. Likert items can be included in this example. Tables can also present standard deviations, probabilities, correlation matrices, etc.

Following this, present a content analysis, in words, of one end of the spectrum of the survey or data table. In our example case, start with the POSITIVE survey responses regarding postoperative care, using descriptive phrases. For example:

“Sixty-five percent of patients over 55 responded positively to the question “ Are you satisfied with your hospital’s postoperative care ?” (Fig. 2)

Include other results such as subcategory analyses. The amount of textual description used will depend on how much interpretation of tables and figures is necessary and how many examples the reader needs in order to understand the significance of your research findings.

Next, present a content analysis of another part of the spectrum of the same research question, perhaps the NEGATIVE or NEUTRAL responses to the survey. For instance:

  “As Figure 1 shows, 15 out of 60 patients in Group A responded negatively to Question 2.”

After you have assessed the data in one figure and explained it sufficiently, move on to your next research question. For example:

  “How does patient satisfaction correspond to in-hospital improvements made to postoperative care?”

This kind of data may be presented through a figure or set of figures (for instance, a paired T-test table).

Explain the data you present, here in a table, with a concise content analysis:

“The p-value for the comparison between the before and after groups of patients was .03% (Fig. 2), indicating that the greater the dissatisfaction among patients, the more frequent the improvements that were made to postoperative care.”

Let’s examine another example of a Results section from a study on plant tolerance to heavy metal stress . In the Introduction section, the aims of the study are presented as “determining the physiological and morphological responses of Allium cepa L. towards increased cadmium toxicity” and “evaluating its potential to accumulate the metal and its associated environmental consequences.” The Results section presents data showing how these aims are achieved in tables alongside a content analysis, beginning with an overview of the findings:

“Cadmium caused inhibition of root and leave elongation, with increasing effects at higher exposure doses (Fig. 1a-c).”

The figure containing this data is cited in parentheses. Note that this author has combined three graphs into one single figure. Separating the data into separate graphs focusing on specific aspects makes it easier for the reader to assess the findings, and consolidating this information into one figure saves space and makes it easy to locate the most relevant results.

Following this overall summary, the relevant data in the tables is broken down into greater detail in text form in the Results section.

• “Results on the bio-accumulation of cadmium were found to be the highest (17.5 mg kgG1) in the bulb, when the concentration of cadmium in the solution was 1×10G2 M and lowest (0.11 mg kgG1) in the leaves when the concentration was 1×10G3 M.”

Captioning and Referencing Tables and Figures

Tables and figures are central components of your Results section and you need to carefully think about the most effective way to use graphs and tables to present your findings . Therefore, it is crucial to know how to write strong figure captions and to refer to them within the text of the Results section.

The most important advice one can give here as well as throughout the paper is to check the requirements and standards of the journal to which you are submitting your work. Every journal has its own design and layout standards, which you can find in the author instructions on the target journal’s website. Perusing a journal’s published articles will also give you an idea of the proper number, size, and complexity of your figures.

Regardless of which format you use, the figures should be placed in the order they are referenced in the Results section and be as clear and easy to understand as possible. If there are multiple variables being considered (within one or more research questions), it can be a good idea to split these up into separate figures. Subsequently, these can be referenced and analyzed under separate headings and paragraphs in the text.

To create a caption, consider the research question being asked and change it into a phrase. For instance, if one question is “Which color did participants choose?”, the caption might be “Color choice by participant group.” Or in our last research paper example, where the question was “What is the concentration of cadmium in different parts of the onion after 14 days?” the caption reads:

 “Fig. 1(a-c): Mean concentration of Cd determined in (a) bulbs, (b) leaves, and (c) roots of onions after a 14-day period.”

Steps for Composing the Results Section

Because each study is unique, there is no one-size-fits-all approach when it comes to designing a strategy for structuring and writing the section of a research paper where findings are presented. The content and layout of this section will be determined by the specific area of research, the design of the study and its particular methodologies, and the guidelines of the target journal and its editors. However, the following steps can be used to compose the results of most scientific research studies and are essential for researchers who are new to preparing a manuscript for publication or who need a reminder of how to construct the Results section.

Step 1 : Consult the guidelines or instructions that the target journal or publisher provides authors and read research papers it has published, especially those with similar topics, methods, or results to your study.

• The guidelines will generally outline specific requirements for the results or findings section, and the published articles will provide sound examples of successful approaches.
• Note length limitations on restrictions on content. For instance, while many journals require the Results and Discussion sections to be separate, others do not—qualitative research papers often include results and interpretations in the same section (“Results and Discussion”).
• Reading the aims and scope in the journal’s “ guide for authors ” section and understanding the interests of its readers will be invaluable in preparing to write the Results section.

Step 2 : Consider your research results in relation to the journal’s requirements and catalogue your results.

• Focus on experimental results and other findings that are especially relevant to your research questions and objectives and include them even if they are unexpected or do not support your ideas and hypotheses.
• Catalogue your findings—use subheadings to streamline and clarify your report. This will help you avoid excessive and peripheral details as you write and also help your reader understand and remember your findings. Create appendices that might interest specialists but prove too long or distracting for other readers.
• Decide how you will structure of your results. You might match the order of the research questions and hypotheses to your results, or you could arrange them according to the order presented in the Methods section. A chronological order or even a hierarchy of importance or meaningful grouping of main themes or categories might prove effective. Consider your audience, evidence, and most importantly, the objectives of your research when choosing a structure for presenting your findings.

Step 3 : Design figures and tables to present and illustrate your data.

• Tables and figures should be numbered according to the order in which they are mentioned in the main text of the paper.
• Information in figures should be relatively self-explanatory (with the aid of captions), and their design should include all definitions and other information necessary for readers to understand the findings without reading all of the text.
• Use tables and figures as a focal point to tell a clear and informative story about your research and avoid repeating information. But remember that while figures clarify and enhance the text, they cannot replace it.

Step 4 : Draft your Results section using the findings and figures you have organized.

• The goal is to communicate this complex information as clearly and precisely as possible; precise and compact phrases and sentences are most effective.
• In the opening paragraph of this section, restate your research questions or aims to focus the reader’s attention to what the results are trying to show. It is also a good idea to summarize key findings at the end of this section to create a logical transition to the interpretation and discussion that follows.
• Try to write in the past tense and the active voice to relay the findings since the research has already been done and the agent is usually clear. This will ensure that your explanations are also clear and logical.
• Make sure that any specialized terminology or abbreviation you have used here has been defined and clarified in the  Introduction section .

Step 5 : Review your draft; edit and revise until it reports results exactly as you would like to have them reported to your readers.

• Double-check the accuracy and consistency of all the data, as well as all of the visual elements included.
• Read your draft aloud to catch language errors (grammar, spelling, and mechanics), awkward phrases, and missing transitions.
• Ensure that your results are presented in the best order to focus on objectives and prepare readers for interpretations, valuations, and recommendations in the Discussion section . Look back over the paper’s Introduction and background while anticipating the Discussion and Conclusion sections to ensure that the presentation of your results is consistent and effective.
• Consider seeking additional guidance on your paper. Find additional readers to look over your Results section and see if it can be improved in any way. Peers, professors, or qualified experts can provide valuable insights.

One excellent option is to use a professional English proofreading and editing service  such as Wordvice, including our paper editing service . With hundreds of qualified editors from dozens of scientific fields, Wordvice has helped thousands of authors revise their manuscripts and get accepted into their target journals. Read more about the  proofreading and editing process  before proceeding with getting academic editing services and manuscript editing services for your manuscript.

As the representation of your study’s data output, the Results section presents the core information in your research paper. By writing with clarity and conciseness and by highlighting and explaining the crucial findings of their study, authors increase the impact and effectiveness of their research manuscripts.

For more articles and videos on writing your research manuscript, visit Wordvice’s Resources page.

Wordvice Resources

• How to Write a Research Paper Introduction 
• Which Verb Tenses to Use in a Research Paper
• How to Write an Abstract for a Research Paper
• How to Write a Research Paper Title
• Useful Phrases for Academic Writing
• Common Transition Terms in Academic Papers
• Active and Passive Voice in Research Papers
• 100+ Verbs That Will Make Your Research Writing Amazing
• Tips for Paraphrasing in Research Papers

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write a Results Section for a Dissertation or Research Paper: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write a Results Section for a Dissertation or Research Paper: Guide & Examples

Table of contents

Use our free Readability checker

A results section is a crucial part of a research paper or dissertation, where you analyze your major findings. This section goes beyond simply presenting study outcomes. You should also include a comprehensive statistical analysis and interpret the collected data in detail.

Without dissertation research results, it is impossible to imagine a scientific work. Your task here is to present your study findings. What are qualitative or quantitative indicators? How to use tables and diagrams? How to describe data? Our article answers all these questions and many more. So, read further to discover how to analyze and describe your research indexes or contact or professionals for dissertation help from StudyCrumb.

What Is a Results Section of Dissertation?

The results section of a dissertation is a data statement from your research. Here you should present the main findings of your study to your readers. This section aims to show information objectively, systematically, concisely. It is allowed using text supplemented with illustrations.  In general, this section's length is not limited but should include all necessary data. Interpretations or conclusions should not be included in this section. Therefore, in theory, this is one of your shortest sections. But it can also be one of the most challenging sections.  The introduction presents a research topic and answers the question "why?". The Methods section explains the data collection process and answers "how?". Meanwhile, the result section shows actual data gained from experiments and tells "what?" Thus, this part plays a critical role in highlighting study's relevance. This chapter gives reader study relevance with novelty. So, you should figure out how to write it correctly. Here are main tasks that you should keep in mind while writing:

• Results answer the question "What was found in your research?"
• Results contain only your study's outcome. They do not include comments or interpretations.
• Results must always be presented accurately & objectively.
• Tables & figures are used to draw readers' attention. But the same data should never be presented in the form of a table and a figure. Don't repeat anything from a table also in text.

Dissertation: Results vs Discussion vs Conclusion

Results and discussion sections of a dissertation are often confused among researchers. Sometimes both these parts are mixed up with a conclusion for thesis . Figured out what is covered in each of these important chapters. Your readers should see that you notice how different they are. A clear understanding of differences will help you write your dissertation more effectively. 5 differences between Results VS Discussion VS Conclusion:

Wanna figure out the actual difference between discussion vs conclusion? Check out our helpful articles about Dissertation Discussion or Dissertation Conclusion.

Present Your Findings When Writing Results Section of Dissertation

Now it's time to understand how to arrange the results section of the dissertation. First, present most general findings, then narrow it down to a more specific one. Describe both qualitative & quantitative results. For example, imagine you are comparing the behavior of hamsters and mice. First, say a few words about the behavioral type of mammals that you studied. Then, mention rodents in general. At end, describe specific species of animals you carried out an experiment on.

Qualitative Results Section in Dissertation

In your dissertation results section, qualitative data may not be directly related to specific sub-questions or hypotheses. You can structure this chapter around main issues that arise when analyzing data. For each question, make a general observation of what data show. For example, you may recall recurring agreements or differences, patterns, trends. Personal answers are the basis of your research. Clarify and support these views with direct quotes. Add more information to the thesis appendix if it's needed.

Quantitative Results Section in a Dissertation

The easiest way to write a quantitative dissertation results section is to build it around a sub-question or hypothesis of your research. For each subquery, provide relevant results and include statistical analysis . Then briefly evaluate importance & reliability. Notice how each result relates to the problem or whether it supports the hypothesis. Focus on key trends, differences, and relationships between data. But don't speculate about their meaning or consequences. This should be put in the discussion vs conclusion section. Suppose your results are not directly related to answering your questions. Maybe there is additional information that helps readers understand how you collect data. In that case, you can include them in the appendix. It is often helpful to include visual elements such as graphs, charts, and tables. But only if they accurately support your results and add value.

Tables and Figures in Results Section in Dissertation

We recommend you use tables or figures in the dissertation results section correctly. Such interpretation can effectively present complex data concisely and visually. It allows readers to quickly gain a statistical overview. On the contrary, poorly designed graphs can confuse readers. That will reduce the effectiveness of your article.  Here are our recommendations that help you understand how to use tables and figures:

• Make sure tables and figures are self-explanatory. Sometimes, your readers may look at tables and figures before reading the entire text. So they should make sense as separate elements.
• Do not repeat the content of tables and figures in text. Text can be used to highlight key points from tables and figures. But do not repeat every element.
• Make sure that values ​​or information in tables and text are consistent. Make sure that abbreviations, group names, interpretations are the same as in text.
• Use clear, informative titles for tables and figures. Do not leave any table or figure without a title or legend. Otherwise, readers will not be able to understand data's meaning. Also, make sure column names, labels, figures are understandable.
• Check accuracy of data presented in tables and figures. Always double-check tables and figures to make sure numbers converge.
• Tables should not contain redundant information. Make sure tables in the article are not too crowded. If you need to provide extensive data, use Appendixes.
• Make sure images are clear. Make sure images and all parts of drawings are precise. Lettering should be in a standard font and legible against the background of the picture.
• Ask for permission to use illustrations. If you use illustrations, be sure to ask copyright holders and indicate them.

Tips on How to Write a Results Section

We have prepared several tips on how to write the results section of the dissertation!  Present data collected during study objectively, logically, and concisely. Highlight most important results and organize them into specific sections. It is an excellent way to show that you have covered all the descriptive information you need. Correct usage of visual elements effectively helps your readers with understanding. So, follow main 3 rules for writing this part:

• State only actual results. Leave explanations and comments for Discussion.
• Use text, tables, and pictures to orderly highlight key results.
• Make sure that contents of tables and figures are not repeated in text.

In case you have questions about a  conceptual framework in research , you will find a blog dedicated to this issue in our database.

What to Avoid When Writing the Results Section of a Dissertation

Here we will discuss how NOT to write the results section of a dissertation. Or simply, what points to avoid:

• Do not make your research too complicated. Your paper, tables, and graphs should be clearly marked and follow order. So that they can exist independently without further explanation.
• Do not include raw data. Remember, you are summarizing relevant results, not reporting them in detail. This chapter should briefly summarize your findings. Avoid complete introduction to each number and calculation.
• Do not contradict errors or false results. Explain these errors and contradictions in conclusions. This often happens when different research methods have been used.
• Do not write a conclusion or discussion. Instead, this part should contain summaries of findings.
• Do not tend to include explanations and inferences from results. Such an approach can make this chapter subjective, unclear, and confusing to the reader.
• Do not forget about novelty. Its lack is one of the main reasons for the paper's rejection.

Dissertation Results Section Example

Let's take a look at some good results section of dissertation examples. Remember that this part shows fundamental research you've done in detail. So, it has to be clear and concise, as you can see in the sample.

Final Thoughts on Writing Results Section of Dissertation

When writing a results section of a dissertation, highlight your achievements by data. The main chapter's task is to convince the reader of conclusions' validity of your research. You should not overload text with too detailed information. Never use words whose meanings you do not understand. Also, oversimplification may seem unconvincing for readers. But on the other hand, writing this part can even be fun. You can directly see your study results, which you'll interpret later. So keep going, and we wish you courage!

Writing any academic paper is long and thorough work. But StudyCrumb got you back! Our professional writers will deliver any type of work quickly and excellently! 

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

Writing the Dissertation - Guides for Success: Results and Discussion

• Writing the Dissertation Homepage
• Overview and Planning
• Research Question
• Literature Review
• Methodology
• Results and Discussion
• The Difference
• What to Avoid

Overview of writing the results and discussion

The results and discussion follow on from the methods or methodology chapter of the dissertation. This creates a natural transition from how you designed your study, to what your study reveals, highlighting your own contribution to the research area.

Disciplinary differences

Please note: this guide is not specific to any one discipline. The results and discussion can vary depending on the nature of the research and the expectations of the school or department, so please adapt the following advice to meet the demands of your project and department. Consult your supervisor for further guidance; you can also peruse our  Writing Across Subjects guide .

Guide contents

As part of the Writing the Dissertation series, this guide covers the most common conventions of the results and discussion chapters, giving you the necessary knowledge, tips and guidance needed to impress your markers! The sections are organised as follows:

• The Difference  - Breaks down the distinctions between the results and discussion chapters.
• Results  - Provides a walk-through of common characteristics of the results chapter.
• Discussion - Provides a walk-through of how to approach writing your discussion chapter, including structure.
• What to Avoid  - Covers a few frequent mistakes you'll want to...avoid!
• FAQs  - Guidance on first- vs. third-person, limitations and more.
• Checklist  - Includes a summary of key points and a self-evaluation checklist.

Training and tools

• The Academic Skills team has recorded a Writing the Dissertation workshop series to help you with each section of a standard dissertation, including a video on writing the results and discussion   (embedded below).
• The dissertation planner tool can help you think through the timeline for planning, research, drafting and editing.
• iSolutions offers training and a Word template to help you digitally format and structure your dissertation.

Introduction

The results of your study are often followed by a separate chapter of discussion. This is certainly the case with scientific writing. Some dissertations, however, might incorporate both the results and discussion in one chapter. This depends on the nature of your dissertation and the conventions within your school or department. Always follow the guidelines given to you and ask your supervisor for further guidance.

As part of the Writing the Dissertation series, this guide covers the essentials of writing your results and discussion, giving you the necesary knowledge, tips and guidance needed to leave a positive impression on your markers! This guide covers the results and discussion as separate – although interrelated – chapters, as you'll see in the next two tabs. However, you can easily adapt the guidance to suit one single chapter – keep an eye out for some hints on how to do this throughout the guide.

Results or discussion - what's the difference?

To understand what the results and discussion sections are about, we need to clearly define the difference between the two.

The results should provide a clear account of the findings . This is written in a dry and direct manner, simply highlighting the findings as they appear once processed. It’s expected to have tables and graphics, where relevant, to contextualise and illustrate the data.

Rather than simply stating the findings of the study, the discussion interprets the findings  to offer a more nuanced understanding of the research. The discussion is similar to the second half of the conclusion because it’s where you consider and formulate a response to the question, ‘what do we now know that we didn’t before?’ (see our Writing the Conclusion   guide for more). The discussion achieves this by answering the research questions and responding to any hypotheses proposed. With this in mind, the discussion should be the most insightful chapter or section of your dissertation because it provides the most original insight.

Across the next two tabs of this guide, we will look at the results and discussion chapters separately in more detail.

Writing the results

The results chapter should provide a direct and factual account of the data collected without any interpretation or interrogation of the findings. As this might suggest, the results chapter can be slightly monotonous, particularly for quantitative data. Nevertheless, it’s crucial that you present your results in a clear and direct manner as it provides the necessary detail for your subsequent discussion.

Note: If you’re writing your results and discussion as one chapter, then you can either:

1) write them as distinctly separate sections in the same chapter, with the discussion following on from the results, or...

2) integrate the two throughout by presenting a subset of the results and then discussing that subset in further detail.

Next, we'll explore some of the most important factors to consider when writing your results chapter.

How you structure your results chapter depends on the design and purpose of your study. Here are some possible options for structuring your results chapter (adapted from Glatthorn and Joyner, 2005):

• Chronological – depending on the nature of the study, it might be important to present your results in order of how you collected the data, such as a pretest-posttest design.
• Research method – if you’ve used a mixed-methods approach, you could isolate each research method and instrument employed in the study.
• Research question and/or hypotheses – you could structure your results around your research questions and/or hypotheses, providing you have more than one. However, keep in mind that the results on their own don’t necessarily answer the questions or respond to the hypotheses in a definitive manner. You need to interpret the findings in the discussion chapter to gain a more rounded understanding.
• Variable – you could isolate each variable in your study (where relevant) and specify how and whether the results changed.

Tables and figures

For your results, you are expected to convert your data into tables and figures, particularly when dealing with quantitative data. Making use of tables and figures is a way of contextualising your results within the study. It also helps to visually reinforce your written account of the data. However, make sure you’re only using tables and figures to supplement , rather than replace, your written account of the results (see the 'What to avoid' tab for more on this).

Figures and tables need to be numbered in order of when they appear in the dissertation, and they should be capitalised. You also need to make direct reference to them in the text, which you can do (with some variation) in one of the following ways:

Figure 1 shows…

The results of the test (see Figure 1) demonstrate…

The actual figures and tables themselves also need to be accompanied by a caption that briefly outlines what is displayed. For example:

Table 1. Variables of the regression model

Table captions normally appear above the table, whilst figures or other such graphical forms appear below, although it’s worth confirming this with your supervisor as the formatting can change depending on the school or discipline. The style guide used for writing in your subject area (e.g., Harvard, MLA, APA, OSCOLA) often dictates correct formatting of tables, graphs and figures, so have a look at your style guide for additional support.

Using quotations

If your qualitative data comes from interviews and focus groups, your data will largely consist of quotations from participants. When presenting this data, you should identify and group the most common and interesting responses and then quote two or three relevant examples to illustrate this point. Here’s a brief example from a qualitative study on the habits of online food shoppers:

Regardless of whether or not participants regularly engage in online food shopping, all but two respondents commented, in some form, on the convenience of online food shopping:

"It’s about convenience for me. I’m at work all week and the weekend doesn’t allow much time for food shopping, so knowing it can be ordered and then delivered in 24 hours is great for me” (Participant A).

"It fits around my schedule, which is important for me and my family” (Participant D).

"In the past, I’ve always gone food shopping after work, which has always been a hassle. Online food shopping, however, frees up some of my time” (Participant E).

As shown in this example, each quotation is attributed to a particular participant, although their anonymity is protected. The details used to identify participants can depend on the relevance of certain factors to the research. For instance, age or gender could be included.

Writing the discussion

The discussion chapter is where “you critically examine your own results in the light of the previous state of the subject as outlined in the background, and make judgments as to what has been learnt in your work” (Evans et al., 2014: 12). Whilst the results chapter is strictly factual, reporting on the data on a surface level, the discussion is rooted in analysis and interpretation , allowing you and your reader to delve beneath the surface.

Next, we will review some of the most important factors to consider when writing your discussion chapter.

Like the results, there is no single way to structure your discussion chapter. As always, it depends on the nature of your dissertation and whether you’re dealing with qualitative, quantitative or mixed-methods research. It’s good to be consistent with the results chapter, so you could structure your discussion chapter, where possible, in the same way as your results.

When it comes to structure, it’s particularly important that you guide your reader through the various points, subtopics or themes of your discussion. You should do this by structuring sections of your discussion, which might incorporate three or four paragraphs around the same theme or issue, in a three-part way that mirrors the typical three-part essay structure of introduction, main body and conclusion.

Figure 1: The three-part cycle that embodies a typical essay structure and reflects how you structure themes or subtopics in your discussion.

This is your topic sentence where you clearly state the focus of this paragraph/section. It’s often a fairly short, declarative statement in order to grab the reader’s attention, and it should be clearly related to your research purpose, such as responding to a research question.

This constitutes your analysis where you explore the theme or focus, outlined in the topic sentence, in further detail by interrogating why this particular theme or finding emerged and the significance of this data. This is also where you bring in the relevant secondary literature.

This is the evaluative stage of the cycle where you explicitly return back to the topic sentence and tell the reader what this means in terms of answering the relevant research question and establishing new knowledge. It could be a single sentence, or a short paragraph, and it doesn’t strictly need to appear at the end of every section or theme. Instead, some prefer to bring the main themes together towards the end of the discussion in a single paragraph or two. Either way, it’s imperative that you evaluate the significance of your discussion and tell the reader what this means.

A note on the three-part structure

This is often how you’re taught to construct a paragraph, but the themes and ideas you engage with at dissertation level are going to extend beyond the confines of a short paragraph. Therefore, this is a structure to guide how you write about particular themes or patterns in your discussion. Think of this structure like a cycle that you can engage in its smallest form to shape a paragraph; in a slightly larger form to shape a subsection of a chapter; and in its largest form to shape the entire chapter. You can 'level up' the same basic structure to accommodate a deeper breadth of thinking and critical engagement.

Using secondary literature

Your discussion chapter should return to the relevant literature (previously identified in your literature review ) in order to contextualise and deepen your reader’s understanding of the findings. This might help to strengthen your findings, or you might find contradictory evidence that serves to counter your results. In the case of the latter, it’s important that you consider why this might be and the implications for this. It’s through your incorporation of secondary literature that you can consider the question, ‘What do we now know that we didn’t before?’

Limitations

You may have included a limitations section in your methodology chapter (see our Writing the Methodology guide ), but it’s also common to have one in your discussion chapter. The difference here is that your limitations are directly associated with your results and the capacity to interpret and analyse those results.

Think of it this way: the limitations in your methodology refer to the issues identified before conducting the research, whilst the limitations in your discussion refer to the issues that emerged after conducting the research. For example, you might only be able to identify a limitation about the external validity or generalisability of your research once you have processed and analysed the data. Try not to overstress the limitations of your work – doing so can undermine the work you’ve done – and try to contextualise them, perhaps by relating them to certain limitations of other studies.

Recommendations

It’s often good to follow your limitations with some recommendations for future research. This creates a neat linearity from what didn’t work, or what could be improved, to how other researchers could address these issues in the future. This helps to reposition your limitations in a positive way by offering an action-oriented response. Try to limit the amount of recommendations you discuss – too many can bring the end of your discussion to a rather negative end as you’re ultimately focusing on what should be done, rather than what you have done. You also don’t need to repeat the recommendations in your conclusion if you’ve included them here.

What to avoid

This portion of the guide will cover some common missteps you should try to avoid in writing your results and discussion.

Over-reliance on tables and figures

It’s very common to produce visual representations of data, such as graphs and tables, and to use these representations in your results chapter. However, the use of these figures should not entirely replace your written account of the data. You don’t need to specify every detail in the data set, but you should provide some written account of what the data shows, drawing your reader’s attention to the most important elements of the data. The figures should support your account and help to contextualise your results. Simply stating, ‘look at Table 1’, without any further detail is not sufficient. Writers often try to do this as a way of saving words, but your markers will know!

Ignoring unexpected or contradictory data

Research can be a complex process with ups and downs, surprises and anomalies. Don’t be tempted to ignore any data that doesn’t meet your expectations, or that perhaps you’re struggling to explain. Failing to report on data for these, and other such reasons, is a problem because it undermines your credibility as a researcher, which inevitably undermines your research in the process. You have to do your best to provide some reason to such data. For instance, there might be some methodological reason behind a particular trend in the data.

Including raw data

You don’t need to include any raw data in your results chapter – raw data meaning unprocessed data that hasn’t undergone any calculations or other such refinement. This can overwhelm your reader and obscure the clarity of the research. You can include raw data in an appendix, providing you feel it’s necessary.

Presenting new results in the discussion

You shouldn’t be stating original findings for the first time in the discussion chapter. The findings of your study should first appear in your results before elaborating on them in the discussion.

Overstressing the significance of your research

It’s important that you clarify what your research demonstrates so you can highlight your own contribution to the research field. However, don’t overstress or inflate the significance of your results. It’s always difficult to provide definitive answers in academic research, especially with qualitative data. You should be confident and authoritative where possible, but don’t claim to reach the absolute truth when perhaps other conclusions could be reached. Where necessary, you should use hedging (see definition) to slightly soften the tone and register of your language.

Definition: Hedging refers to 'the act of expressing your attitude or ideas in tentative or cautious ways' (Singh and Lukkarila, 2017: 101). It’s mostly achieved through a number of verbs or adverbs, such as ‘suggest’ or ‘seemingly.’

Q: What’s the difference between the results and discussion?

A: The results chapter is a factual account of the data collected, whilst the discussion considers the implications of these findings by relating them to relevant literature and answering your research question(s). See the tab 'The Differences' in this guide for more detail.

Q: Should the discussion include recommendations for future research?

A: Your dissertation should include some recommendations for future research, but it can vary where it appears. Recommendations are often featured towards the end of the discussion chapter, but they also regularly appear in the conclusion chapter (see our Writing the Conclusion guide   for more). It simply depends on your dissertation and the conventions of your school or department. It’s worth consulting any specific guidance that you’ve been given, or asking your supervisor directly.

Q: Should the discussion include the limitations of the study?

A: Like the answer above, you should engage with the limitations of your study, but it might appear in the discussion of some dissertations, or the conclusion of others. Consider the narrative flow and whether it makes sense to include the limitations in your discussion chapter, or your conclusion. You should also consult any discipline-specific guidance you’ve been given, or ask your supervisor for more. Be mindful that this is slightly different to the limitations outlined in the methodology or methods chapter (see our Writing the Methodology guide vs. the 'Discussion' tab of this guide).

Q: Should the results and discussion be in the first-person or third?

A: It’s important to be consistent , so you should use whatever you’ve been using throughout your dissertation. Third-person is more commonly accepted, but certain disciplines are happy with the use of first-person. Just remember that the first-person pronoun can be a distracting, but powerful device, so use it sparingly. Consult your lecturer for discipline-specific guidance.

Q: Is there a difference between the discussion and the conclusion of a dissertation?

A: Yes, there is a difference. The discussion chapter is a detailed consideration of how your findings answer your research questions. This includes the use of secondary literature to help contextualise your discussion. Rather than considering the findings in detail, the conclusion briefly summarises and synthesises the main findings of your study before bringing the dissertation to a close. Both are similar, particularly in the way they ‘broaden out’ to consider the wider implications of the research. They are, however, their own distinct chapters, unless otherwise stated by your supervisor.

The results and discussion chapters (or chapter) constitute a large part of your dissertation as it’s here where your original contribution is foregrounded and discussed in detail. Remember, the results chapter simply reports on the data collected, whilst the discussion is where you consider your research questions and/or hypothesis in more detail by interpreting and interrogating the data. You can integrate both into a single chapter and weave the interpretation of your findings throughout the chapter, although it’s common for both the results and discussion to appear as separate chapters. Consult your supervisor for further guidance.

Here’s a final checklist for writing your results and discussion. Remember that not all of these points will be relevant for you, so make sure you cover whatever’s appropriate for your dissertation. The asterisk (*) indicates any content that might not be relevant for your dissertation. To download a copy of the checklist to save and edit, please use the Word document, below.

• Results and discussion self-evaluation checklist

• << Previous: Methodology
• Next: Conclusion >>
• Last Updated: Nov 21, 2024 4:14 PM
• URL: https://library.soton.ac.uk/writing_the_dissertation

Library Guides

Dissertations 5: findings, analysis and discussion: home.

• Results/Findings

Alternative Structures

The time has come to show and discuss the findings of your research. How to structure this part of your dissertation? 

Dissertations can have different structures, as you can see in the dissertation  structure  guide.

Dissertations organised by sections

Many dissertations are organised by sections. In this case, we suggest three options. Note that, if within your course you have been instructed to use a specific structure, you should do that. Also note that sometimes there is considerable freedom on the structure, so you can come up with other structures too. 

A) More common for scientific dissertations and quantitative methods:

- Results chapter 

- Discussion chapter

Example: 

• Introduction
• Literature review
• Methodology
• (Recommendations)

if you write a scientific dissertation, or anyway using quantitative methods, you will have some  objective  results that you will present in the Results chapter. You will then interpret the results in the Discussion chapter.  

B) More common for qualitative methods

- Analysis chapter. This can have more descriptive/thematic subheadings.

- Discussion chapter. This can have more descriptive/thematic subheadings.

• Case study of Company X (fashion brand) environmental strategies 
• Successful elements
• Lessons learnt
• Criticisms of Company X environmental strategies 
• Possible alternatives

C) More common for qualitative methods

- Analysis and discussion chapter. This can have more descriptive/thematic titles.

• Case study of Company X (fashion brand) environmental strategies 

If your dissertation uses qualitative methods, it is harder to identify and report objective data. Instead, it may be more productive and meaningful to present the findings in the same sections where you also analyse, and possibly discuss, them. You will probably have different sections dealing with different themes. The different themes can be subheadings of the Analysis and Discussion (together or separate) chapter(s). 

Thematic dissertations

If the structure of your dissertation is thematic ,  you will have several chapters analysing and discussing the issues raised by your research. The chapters will have descriptive/thematic titles. 

• Background on the conflict in Yemen (2004-present day)
• Classification of the conflict in international law  
• International law violations
• Options for enforcement of international law
• Next: Results/Findings >>
• Last Updated: Aug 4, 2023 2:17 PM
• URL: https://libguides.westminster.ac.uk/c.php?g=696975

CONNECT WITH US