recent research papers in solar cells

Recent advances in organic solar cells: materials, design, and performance

• Research Article
• Published: 12 July 2023
• Volume 53 , pages 1403–1419, ( 2024 )

Cite this article

• Ahmed Salih Mahdi 1 ,
• Lina M. Shaker 1 &
• Ahmed Alamiery   ORCID: orcid.org/0000-0003-1033-4904 2   nAff3  

1242 Accesses

5 Citations

Explore all metrics

Organic solar cells have emerged as promising alternatives to traditional inorganic solar cells due to their low cost, flexibility, and tunable properties. This mini review introduces a novel perspective on recent advancements in organic solar cells, providing an overview of the latest developments in materials, device architecture, and performance optimization. In contrast to existing literature, this review places a strong emphasis on the role of molecular engineering in achieving high power conversion efficiencies. It delves into the latest materials used in organic solar cells, including novel polymers and small molecules, showcasing their unique properties and potential for improved performance. Furthermore, the review explores cutting-edge device architectures, specifically tandem and multi-junction cells, which offer unprecedented opportunities for achieving higher efficiencies. The discussion on these advanced architectures highlights their potential and paves the way for future advancements in the field of organic solar cells. To maximize the performance of organic solar cells, this review also presents recent strategies for performance optimization, focusing on interface engineering, morphological control, and stability enhancement. By providing a comprehensive analysis of these strategies, the review enables readers to gain a deeper understanding of the underlying principles and techniques driving the improvement in device performance. By introducing this novel perspective on recent developments, this mini review offers researchers and practitioners a valuable resource for staying up-to-date with the latest advancements in organic solar cells. It not only presents the current state of the field but also identifies future directions and challenges, fostering further research and innovation in this rapidly evolving field.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Subscribe and save.

• Get 10 units per month
• Download Article/Chapter or eBook
• 1 Unit = 1 Article or 1 Chapter
• Cancel anytime

Price includes VAT (Russian Federation)

Instant access to the full article PDF.

Rent this article via DeepDyve

Institutional subscriptions

Similar content being viewed by others

Recent progress in organic solar cells (Part II device engineering)

A Review on “Designs and Fabrication” for the Next Generation of Organic Solar Cells Technology

Introduction to Organic Solar Cells

Y. Zhang, L. Zuo, L. Ding, H. Wu, Organic solar cells based on small molecules. J. Mater. Chem. A 9 (9), 4942–4956 (2021)

Google Scholar  

C.J. Brabec, S. Gowrisanker, J.J. Halls, D. Laird, S. Jia, S.P. Williams, Polymer–fullerene bulk-heterojunction solar cells. Adv. Mater. 22 (34), 3839–3856 (2010)

Article   Google Scholar  

P. Chaudhary, P. Kumar, P. Kumar, I. Kaur, Organic solar cells: a review on recent advances and challenges. Renew. Sustain. Energy Rev. 139 , 110686 (2021)

G. Li, R. Zhu, Y. Yang, Polymer solar cells. Nat. Photonics 6 (3), 153–161 (2012)

Article   ADS   Google Scholar  

F.C. Krebs, Fabrication and processing of polymer solar cells: a review of printing and coating techniques. Sol. Energy Mater. Sol. Cells 93 (4), 394–412 (2009)

Z. He, B. Xiao, F. Liu, H. Wu, Y. Yang, S. Xiao, Y. Cao, single-junction polymer solar cells exceeding 10% power conversion efficiency. Adv. Mater. 27 (6), 1035–1041 (2015)

Y. Chang, C. Chu, Y. Yang, X. Gong, Recent advances in roll-to-roll fabrication of polymer solar cells. Adv. Mater. 26 (36), 6342–6363 (2014)

Y. Liang, Z. Xu, J. Xia, S.T. Tsai, Y. Wu, G. Li, Y. Yang, For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%. Adv. Mater. 22 (20), E135–E138 (2010)

J. Hou, O. Inganäs, R.H. Friend, F. Gao, Organic solar cells based on non-fullerene acceptors. Nat. Mater. 17 (2), 119–128 (2018)

X. Chen, X. Guo, S. Zhang, Y. Li, F. Liu, L. Huo, Y. Yang, Ladder-type polymer PT-TQBD enables efficient solar cells with a very low energy loss. Nat. Energy 3 (5), 422–427 (2018)

ADS   Google Scholar  

W. Zhao, S. Li, H. Yao, S. Zhang, Y. Zhang, B. Yang, J. Hou, Molecular optimization enables over 13% efficiency in organic solar cells. J. Am. Chem. Soc. 139 (21), 7148–7151 (2017)

G. Li, Y. Yang, P. Smith, High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends. Nat. Mater. 4 (11), 864–868 (2005)

L. Ye, Y. Xiong, W. Li, S. Li, Y. Wu, J. Hou, High-performance multiple-donor bulk heterojunction solar cells. Nat. Photonics 9 (10), 662–667 (2015)

J. Kim, S. Hong, K. Lee, H. Kang, H. Kim, T.W. Lee, Versatile non-fullerene acceptors for organic photovoltaics. Nat. Commun. 9 (1), 1–11 (2018)

B. Kan, H. Feng, X. Wan, X. Liu, W. Ni, S. Yang, Y. Wang, C. Li, L. Feng, Y. Chen et al., A series of simple oligomer-like small molecules based on diketopyrrolopyrrole for solution-processed solar cells with high efficiency. J. Am. Chem. Soc. 136 (42), 15529–15532 (2014)

L. Mao, Z. Xie, L. Wang, F. Xie, H. Chen, Zinc phthalocyanine/C60 bilayer heterojunction photovoltaic devices. Appl. Phys. Lett. 89 (9), 093504 (2006)

Y. Li, L. Ye, W. Zhao, S. Li, S. Zhang, S. Mukherjee, H. Ade, J. Hou, A molecular nematic liquid crystalline material for high-performance organic photovoltaics. Nat. Commun. 9 (1), 1–9 (2018)

Z. He, C. Zhong, S. Su, M. Xu, H. Wu, Y. Cao, Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure. Nat. Photonics 6 , 591–595 (2012)

Y. Liu, Y. Chang, C. Chao, C. Wang, W. Lee, H. Chen, A.J. Heeger, A high-mobility electron-transporting polymer for printed transistors. Nature 466 , 622–626 (2010)

Y. Lin, F. Zhao, Y. Wu, K. Jiang, J. Zhu, H. Ade, H. Yan, A chlorinated acceptor for high-efficiency organic photovoltaics. Nat. Energy 3 , 748–754 (2018)

F. Liu, M. Zhang, Y. Yang et al., Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells. Nat. Commun. 10 , 1095 (2019)

Y. Zhang, X. Zhan, Non-fullerene acceptors for organic solar cells. Nat. Rev. Mater. 2 , 190838 (2019)

N. Gasparini, T. Näreoja, D. Pankov et al., 3D molecular ordering of a high-performance solution-processed small-molecule organic semiconductor. Nat. Mater. 15 , 999–1005 (2016)

C. Yan, S. Barlow, Z. Wang et al., Non-fullerene acceptor with low energy loss for organic solar cells with efficiency over 16%. Nat. Commun. 9 , 5357 (2018)

G. Li, V. Shrotriya, J. Huang et al., High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends. Nat. Mater. 4 , 864–868 (2005)

Y. Yang, Z. Zhang, H. Bin et al., Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages. Nat. Commun. 7 , 13751 (2016)

S. Zhang, L. Ye, J. Hou, A wide bandgap polymer with a deep HOMO level enables 14.2% efficiency in polymer solar cells. J. Am. Chem. Soc. 139 , 2387–2390 (2017)

Y. Lin, X. Zhan, Y. Yang, Non-fullerene acceptors for organic solar cells. Nat. Rev. Mater. 3 , 18003 (2018)

M. Zhang, Y. Wang, T. Zhang, Z. Ling, J. Liu, L. Feng, X. Guo, Z. Wei, W. Ma, A non-fullerene acceptor with superior properties: wide-bandgap, low-LUMO, and high mobility. Angew. Chem. Int. Ed. 57 , 14717–14721 (2018)

C.J. Brabec, S. Gowrisanker, J.J.M. Halls, D. Laird, S. Jia, S.P. Williams, Polymer-fullerene bulk-heterojunction solar cells. Adv. Mater. 22 , 3839–3856 (2010)

C.J. Brabec, N.S. Sariciftci, J.C. Hummelen, Plastic solar cells. Adv. Funct. Mater. 11 , 15–26 (2001)

M.A. Green, K. Emery, D.L. King, S. Igari, W. Warta, Solar cell efficiency tables (version 37). Prog. Photovolt. 19 , 84–107 (2011)

Z. He, C. Zhong, S. Su, M. Xu, H. Wu, W. Cao, Y. Huang, Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure. Adv. Mater. 24 , 1740–1743 (2012)

L. Hu, M. Wu, G. Wang, X. Zhou, Y. Liu, Y. Ma, X. Yang, Y. Cao, Polymeric photovoltaic cells based on conjugated polymers incorporating palladium or platinum complex units. Adv. Mater. 23 , 1482–1486 (2011)

Y. Cui, H. Yao, T. Zhang, Y. Wang, K. Xian, Y. Xu, L. Hong, J. Wei, C. An, J. Hou, Y. Li, Y. Chen, High-performance tandem organic solar cells with complementary absorption bands. Nat. Commun. 9 , 2572 (2018)

S. Chen, E. Mosconi, Y. Fang, M. Xiao, H. Wang, Y. Zhou, Y. Zhao, Y. Gao, J. Huang, Perovskite/perovskite tandem solar cells. Nat. Mater. 17 , 703–709 (2018)

X. Yang, P. Cheng, L. Wang, G. Zhou, W. Ma, J. Zhao, H. Ade, H. Yan, F. Gao, Triple-junction polymer solar cells incorporating both fluorescence and phosphorescence. Adv. Energy Mater. 9 , 1900808 (2019)

H. Yao, Y. Chen, Design and synthesis of a low-bandgap small molecule acceptor for efficient polymer solar cells with high open-circuit voltage. Energy Environ. Sci. 11 , 1898–1904 (2018)

M.A. Green, A. Ho-Baillie, Tandem solar cells: review of design principles and roadmap to commercialization. npj Flex Electron. 1 , 1–12 (2017)

S. Albrecht, C.J. Brabec, Tandem solar cells: the frontier of crystalline silicon photovoltaics. Adv. Mater. 29 , 1606480 (2017)

J.F. Geisz, D.J. Friedman, J.S. Ward, W. Olavarria, I. Garcia, M.A. Steiner, T. Moriarty, J.T. Kiehl, M.J. Romero, Progress toward 50% efficiency for mechanically stacked multijunction solar cells. IEEE J. Photovolt. 7 (6), 1487–1494 (2017)

U. Würfel, S. Rein, Tandem Solar Cells: Fundamentals, Design, and Applications (John Wiley & Sons, New York, 2015)

O.D. Miller, C. Xu, G.J. Rey, P. Ireland, D. Johnstone, E.C. Warmann, M.L. Lee, M.A. Green, K.R. Catchpole, Cost-effective four-terminal perovskite-silicon tandem solar cells enabling ultrahigh efficiency. Joule 4 , 510–522 (2020)

M. Dupuis, E.E. Looney, Multi-junction and tandem solar cells for space applications, in 2019 IEEE Aerospace Conference , IEEE, pp 1–16 ( 2019)

W. Li, A. Furlan, K.H. Hendriks, Material science of organic solar cells. Adv. Energy Mater. 6 (20), 1600377 (2016)

P. Cheng, X. Zhan, Y. Wu, Interface engineering for organic electronics. Adv. Mater. 30 (39), 1707005 (2018)

N. Li, C.J. Brabec, Air-stable and efficient tandem organic solar cells based on zinc phthalocyanine and a fullerene derivative. Adv. Energy Mater. 9 (5), 1802989 (2019)

S. Li, F. Liu, T.P. Russell, Solution-processed semiconducting polymer bulk heterojunctions: from morphology control to improved electronic performance. Acc. Chem. Res. 49 (11), 2199–2207 (2016)

F. De Rossi, A. Giuri, V. D’Innocenzo, A. Luzio, G. Grancini, A. Petrozza, Light management in organic solar cells. Chem. Soc. Rev. 49 (13), 4533–4553 (2020)

A. Facchetti, π-Conjugated polymers for organic electronics and photovoltaic cell applications. Chem. Mater. 23 (3), 733–758 (2011)

I. Salzmann, G. Heimel, Interface engineering in organic field-effect transistors. Chem. Rev. 116 (23), 13714–13751 (2016)

S. Liu, S. Wang, H. Zhou, Interface engineering of metal oxide electrodes for high-performance energy storage devices. Energy Storage Mater. 21 , 291–308 (2019)

Z. Li, J. Song, M. Sun, X. Hu, W. Zhu, Morphology control of organic solar cells by mixed solvent towards high performance. Org. Electron. 64 , 44–51 (2019)

L. Zhou, K. Zhou, J. Wang, W. Ma, H. Zhang, Polymer additives for efficient organic solar cells: recent developments and future prospects. Adv. Mater. 30 (42), 1802102 (2018)

N. Li, F. Zhang, C. Liu, X. Zhan, Efficient and stable polymer solar cells based on a polymer encapsulation strategy. ACS Appl. Mater. Interfaces 10 (3), 2433–2440 (2018)

C. Cui, C. Li, J. Zhang, Y. Wang, Z. Liu, Y. Li et al., Enhancing stability and efficiency of organic solar cells through the molecular engineering of an alkylated indacenodithienothiophene-based donor. J. Mater. Chem. A 8 (3), 1423–1431 (2020)

Z. Li, Y. Lin, W. Li, P. Cheng, F. Liu, X. Hu et al., A chlorinated acceptor with improved electron mobility and stability for high-performance organic solar cells. Adv. Mater. 29 (19), 1605658 (2017)

Y. Zhou, C. Fuentes-Hernandez, T.M. Khan, J. Liu, J. Hsu, J. Shim et al., Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers. Science 363 (6422), 265–270 (2019)

Y. Li, Z. Zhao, H. Li, J. Fang, Y. Liu, Y. Zhang et al., Spray-coating fabrication of efficient organic solar cells with enhanced uniformity and reproducibility. Sol. Energy Mater. Sol. Cells 209 , 110464 (2020)

W. Li, Y. Zhang, J. Zhao, Interface engineering for organic electronics. Adv. Mater. 29 (7), 1602546 (2017)

Z. Li et al., A star-shaped electron acceptor with alkylthio side chains for efficient organic solar cells with reduced energy loss. J. Mater. Chem. A 7 (28), 16843–16849 (2019)

W. Liu et al., Efficient and stable organic solar cells based on an n-type small molecule acceptor with a high electron mobility. J. Mater. Chem. A 8 (29), 14402–14410 (2020)

G. Zhang et al., Polymer acceptors with minimized absorption overlap for efficient organic solar cells with high stability. Energy Environ. Sci. 14 (2), 1113–1123 (2021)

H. Zhou et al., A polymer tandem solar cell with 10.6% power conversion efficiency. Nat. Commun. 5 , 1–8 (2014)

M. Saliba et al., Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency. Energy Environ. Sci. 9 (6), 1989–1997 (2016)

A. Abate, T. Leijtens, S. Pathak, H.J. Snaith, Tandem solar cells: advances and challenges. Nat. Energy 5 (7), 596–605 (2020)

P. Pandit, A. Chandak, P. Shrivastava, Environmental effects on the performance of solar photovoltaic systems: a review. Energy Convers. Manage. 233 , 113758 (2021)

L.M. Shaker, A.A. Al-Amiery, W.K. Al-Azzawi, A clearer vision: a mini-review on contact lenses. J. Opt. (2023). https://doi.org/10.1007/s12596-023-01222-w

L.M. Shaker, W.K. Al-Azzawi, A. Al-Amiery, M.S. Takriff, W.N.R. Wan Isahak, Highly transparent antibacterial hydrogel-polymeric contact lenses doped with silver nanoparticles. J. Vinyl Addit. Technol. (2023). https://doi.org/10.1002/vnl.21995

L.M. Shaker, S. Abdulhadi, W.K. Al-Azzawi, A. Alamiery, M.S. Takriff, W.N.R.W. Isahak, Colorless poly (vinyl pyrrolidone) hydrogel contact lenses synergized with silver nanoparticles. J. Opt. (2023). https://doi.org/10.1007/s12596-023-01176-z

L.M. Shaker, A.A. Alamiery, M. Takriff, W.N.R. Wan Isahak, Nano-titanium oxide in polymeric contact lenses. Nanomanufacturing 2 (3), 71–81 (2022)

L.M. Shaker, A. Alamiery, M. Takriff, W.N.R. Wan Isahak, Novel Blue-wavelength-blocking contact lens with Er 3+ /TiO 2  NPs: manufacture and characterization. Nanomaterials 11 (9), 2190 (2022)

L.M. Shaker, A. Al-Adili, A.A. Al-Amiery, Human eye response to the iris diameter variation at polychromatic light programmatically. J. Phys: Conf. Ser. 1795 (1), 012025 (2021)

S.L.M. Shaker, S. Osamah, A.A. Al-Amiery, ingle-mode optical fibers coupling: study of the field of view. IOP Conf. Series: Mater. Sci. Eng. 1045 (1), 012009 (2021)

L.M. Shaker, A.A. Al-Amiery, A.A.H. Kadhum, M.S. Takriff, Manufacture of contact lens of nanoparticle-doped polymer complemented with zemax. Nanomaterials 10 (10), 2028 (2020)

L.M. Shaker, A.H. Al-Hamdani, A.A. Al-Amiery, Vision improvement using titanium dioxide nanoparticles-doped PMMA for contact lenses. Eng. Technol. J. 38 (5), 681–689 (2020)

L.M. Shaker, A.H. Al-Hamdani, A.A. Al-Amiery, Nano-particle doped polymers to improve contact lenses optical quality. Int. J. Nanoelectron. Mater. 13 (1), 1–12 (2020)

L.M. Shaker, A.H. Al-Hamdani, A.A. Al-Amiery, A comparative study of optical quality for different polymeric contact lenses. J. Phys: Conf. Ser. 1234 (1), 012042 (2020)

L.M. Shaker, A.H. Al-Hamdani, A.A. Al-Amiery, Plastic materials for modifying the refractive index of contact lens overview. Res. Dev. Mater. Sci. 11 , 2–1 (2019)

Download references

Author information

Ahmed Alamiery

Present address: Department of Chemical and Process Engineering, Faculty of Engineering and Built Environment, University Kebangsaan Malaysia (UKM), P.O. Box 43000, Bangi, Selangor, Malaysia

Authors and Affiliations

Research Energy Department, Training and Research Office, Baghdad, 10001, Iraq

Ahmed Salih Mahdi & Lina M. Shaker

Energy and Renewable Energies Technology Center, University of Technology, Baghdad, 10001, Iraq

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Ahmed Alamiery .

Additional information

Publisher's note.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Mahdi, A.S., Shaker, L.M. & Alamiery, A. Recent advances in organic solar cells: materials, design, and performance. J Opt 53 , 1403–1419 (2024). https://doi.org/10.1007/s12596-023-01262-2

Download citation

Received : 12 May 2023

Accepted : 03 June 2023

Published : 12 July 2023

Issue Date : April 2024

DOI : https://doi.org/10.1007/s12596-023-01262-2

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Organic solar cells
• Optimization
• Roll-to-roll printing
• Spray-coating
• Find a journal
• Publish with us
• Track your research

MIT Technology Review

• Newsletters

Super-efficient solar cells: 10 Breakthrough Technologies 2024

Solar cells that combine traditional silicon with cutting-edge perovskites could push the efficiency of solar panels to new heights.

• Emma Foehringer Merchant archive page

Beyond Silicon, Caelux, First Solar, Hanwha Q Cells, Oxford PV, Swift Solar, Tandem PV

3 to 5 years

In November 2023, a buzzy solar technology broke yet another world record for efficiency. The previous record had existed for only about five months—and it likely won’t be long before it too is obsolete. This astonishing acceleration in efficiency gains comes from a special breed of next-­generation solar technology: perovskite tandem solar cells. These cells layer the traditional silicon with materials that share a unique crystal structure.

In the decade that scientists have been toying with perovskite solar technology , it has continued to best its own efficiency records, which measure how much of the sunlight that hits the cell is converted into electricity. Perovskites absorb different wavelengths of light from those absorbed by silicon cells, which account for 95% of the solar market today. When silicon and perovskites work together in tandem solar cells, they can utilize more of the solar spectrum, producing more electricity per cell. 

Technical efficiency levels for silicon-­based cells top out below 30%, while perovskite-only cells have reached experimental efficiencies of around 26%. But perovskite tandem cells have already exceeded 33% efficiency in the lab. That is the technology’s tantalizing promise: if deployed on a significant scale, perovskite tandem cells could produce more electricity than the legacy solar cells at a lower cost. 

But perovskites have stumbled when it comes to actual deployment. Silicon solar cells can last for decades. Few perovskite tandem panels have even been tested outside. 

The electrochemical makeup of perovskites means they’re sensitive to sucking up water and degrading in heat, though researchers have been working to create better barriers around panels and shifting to more stable perovskite compounds. 

In May, UK-based Oxford PV said it had reached an efficiency of 28.6% for a commercial-size perovskite tandem cell, which is significantly larger than those used to test the materials in the lab, and it plans to deliver its first panels and ramp up manufacturing in 2024. Other companies could unveil products later this decade. 

Climate change and energy

Your future air conditioner might act like a battery.

New technologies store cooling power for when it’s needed most.

• Casey Crownhart archive page

The cost of building the perfect wave

The growing business of surf pools wants to bring the ocean experience inland. But with many planned for areas facing water scarcity, who bears the cost?

• Eileen Guo archive page

This London nonprofit is now one of the biggest backers of geoengineering research

Plus, Simons, EDF, and a new venture backed by Meta’s former CTO are poised to pour tens of millions more into the controversial field.

• James Temple archive page

Hydrogen bikes are struggling to gain traction in China

Over a dozen Chinese cities are experimenting with hydrogen-powered shared bikes, partly because of safety concerns around lithium-ion batteries.

• Zeyi Yang archive page

Stay connected

Get the latest updates from mit technology review.

Discover special offers, top stories, upcoming events, and more.

Thank you for submitting your email!

It looks like something went wrong.

We’re having trouble saving your preferences. Try refreshing this page and updating them one more time. If you continue to get this message, reach out to us at [email protected] with a list of newsletters you’d like to receive.

Sustainable Energy & Fuels

Metal-free and natural dye sensitized solar cells: recent advancement and future perspectives.

Currently, the predominant energy source utilized by humanity is fossil fuels. However, as demand surges and supplies wane, identifying alternative sources of energy becomes increasingly critical. Solar energy has emerged as a promising solution to this energy crisis, and dye-sensitized solar cells (DSSCs) represent a particularly viable technology. DSSCs are the most confident choice for a cost-effective and reliable substitute for other types of photovoltaic devices including organic, inorganic and hybrid solar cells. DSSCs help to convert light energy into electrical energy directly. DSSCs are simple to manufacture, require less energy to produce, and can be made from abundant and non-toxic materials. In addition, they can function effectively even in environments with low levels of lighting conditions, making them a versatile option for various applications. This review aims to provide an in-depth understanding of the operating principle, components, and progress of DSSCs. It begins by explaining the operational mechanics of DSSCs. Specifically, it highlights the process by which the cells convert solar energy into electrical energy via a photoelectrochemical mechanism. This report also delves into the various components of DSSCs, including the photoanode, counter electrode, and electrolyte, and their respective roles in the conversion process. This review investigates the recent advancements in the field of DSSC technology which encompasses novel approaches such as the utilization of new materials to enhance light harvesting efficiency and the development of efficient DSSCs. It also discusses the present state of development of DSSCs, including their commercial availability and widespread adoption. Finally, the review highlights the potential future prospects for DSSCs, such as their integration with other renewable energy sources and their use in building-integrated photovoltaics. By gaining a comprehensive understanding of the benefits and limitations of DSSCs, we can make informed decisions on how to optimally harness this technology to meet our energy requirements sustainably and efficiently.

Article information

Download citation, permissions.

S. S. Malhotra, M. Ahmed, M. K. Gupta and A. Ansari, Sustainable Energy Fuels , 2024, Accepted Manuscript , DOI: 10.1039/D4SE00406J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page .

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page .

Read more about how to correctly acknowledge RSC content .

Social activity

Search articles by author.

This article has not yet been cited.

Advertisements

You are using an outdated browser. Please upgrade your browser or activate Google Chrome Frame to improve your experience.

• Commercial & industrial PV
• Grids & integration
• Residential PV
• Utility Scale PV
• Energy storage
• Balance of systems
• Modules & upstream manufacturing
• Opinion & analysis
• Press releases
• Sustainability
• Technology and R&D
• pv magazine UP initiative
• pv magazine Hydrogen Hub
• Guggenheim Solar Index
• Market overview: Large-scale storage systems
• Market overview: Microgrid control systems
• Module Price Index
• PV Project Exchange
• Archived: Solar Superheroes
• Roundtables Europe
• SunRise Arabia
• pv magazine Webinars
• pv magazine Webinars: German
• pv magazine Spotlights
• Event calendar
• External Events
• pv magazine live
• Special Editions
• Clean Power Research: Solar data solutions to maximize PV project performance
• BayWa r.e. 2019 grid parity white paper
• Partner news
• pv magazine test results
• Issues before 2023
• pv magazine team
• Newsletter subscription
• Magazine subscription
• Community standards

Perovskite-silicon tandem solar cell based on hybrid interconnecting layers achieves 28.47% efficiency

An international research team has designed a two-terminal perovskite-silicon tandem solar cell that utilizes new hybrid interconnecting layers to reduce recombination losses in the top perovskite device. The tandem cell achieved an impressive fill factor of 81.8%, which the scientists said is the highest value ever reported for this cell technology to date.

• Modules & Upstream Manufacturing

Schematic of the solar cell

Image: Jinan University

A group of researchers led by the Jinan University in China has developed a two-terminal (2T) perovskite-silicon tandem solar cell based on special hybrid interconnecting layers (ICLs) that prevent direct contact between the perovskite absorber and transparent conductive oxide (TCO).

“Typical self–assembled monolayers (SAMs) directly on  transparent-conductive-oxide (TCO) recombination layer exhibit poor uniformity and compactness, thus resulting in significant current leakage losses and poor reproducibility of tandem solar cells,” the research's corresponding author, Yousheng Wang, told pv magazine . “To address this issue, we proposed a sputtered nickel oxide (NiOx) as the seed layer of SAMs to build the hybrid interconnecting layers. The sputtered treatment technique provides an easy coating on a complex substrate and high reproducibility.”

According to Wang, NiOx materials can further increase the coupling of SAM molecules with the substrate. Thus, the hybrid ICLs could improve the uniformity of the interface between the TCO and the SAM based on MeO-2PACz , which is also known as [2-(3,6-Dimethoxy-9H-carbazol-9-yl)ethyl]phosphonic acid, and reduce the leakage current. “Then, a good energy level alignment between perovskite and hybrid ICLs was built, which is beneficial to carrier extraction and transportation,” he added. “The hybrid ICLs further decrease the interface defects and bulk defects.”

The scientists built the tandem cell with a bottom silicon heterojunction device and a 19.73%-efficient top inverted perovskite solar cell with an energy bandgap of 1.71 eV integrating the ICLs. The latter was designed with a substrate made of indium tin oxide (ITO), a hole transport layer (HTL) made of nickel(II) oxide (NiOx), the MeO-2PACz SAM, a perovskite absorber doped with 2-phenylethylammonium iodide (PEAI), an electron transport layer (ETL) based on a buckminsterfullerene (C60), a transparent back contact made of indium zinc oxide (IZO), and a silver (Ag) metal contact.

The performance of the tandem device was analyzed and compared to that of a refence cell based on a NiOx HTL but without the MeO-2PACz SAM. The latter achieved a power conversion efficiency of 22.27%, an open-circuit voltage of 1.75 V, a short-circuit current density of 17.85 mA cm −2 , and a fill factor of 71.15%. The former obtained an efficiency of 28.47%, an open-circuit voltage of 1.88 V, a short-circuit current density of 18.25 mA cm −2 , and a fill factor of 81.8%.

The group emphasized that the tandem cell's fill factor is currently one of the highest in the scientific literature for perovskite-silicon devices. “It is found that the hybrid ICLs of NiO x /MeO-2PACz significantly reduce current leakage and non-radiative recombination losses by avoiding direct contact between perovskites and TCO,” it further explained. “Our results provide an effective method to improve the uniformity and reduce the leakage current of MeO-2PACz coating on the substrate.”

The solar cell was presented in the paper “ Hybrid interconnecting layers reduce current leakage losses in perovskite/silicon tandems with 81.8% fill factor ,” published in Cell Reports Physical Science . The research group comprised academics from Germany's Forschungszentrum Jülich GmbH, as well as from the Wuyi University and the University of Macau in China.

This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com .

Popular content

Emiliano Bellini

More articles from Emiliano Bellini

SJVN awards 1.2 GW solar projects in India

Microvast introduces grid-scale lfp battery, related content.

• World’s highways could host 52.3 billion solar panels, say researchers Researchers from the Chinese Academy of Sciences, Tsinghua University, Chinese Academy of Geosciences, and Columbia Un...
• Next2Sun bets on Italy for market expansion Despite difficulties in France, Next2Sun still sees growth opportunities in Europe, starting with Italy. The German ag...
• KAUST reveals details of 33.7%-efficient perovskite-silicon tandem solar cell In a new scientific paper, researchers from the King Abdullah University of Science and Technology (KAUST) in Saudi Ar...

Leave a Reply Cancel reply

Please be mindful of our community standards .

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.

Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.

You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.

Further information on data privacy can be found in our Data Protection Policy .

By subscribing to our newsletter you’ll be eligible for a 10% discount on magazine subscriptions!

• Select Edition(s) * Hold Ctrl or Cmd to select multiple editions. Tap to select multiple editions. Global (English, daily) Germany (German, daily) U.S. (English, daily) Australia (English, daily) China (Chinese, weekly) India (English, daily) Latin America (Spanish, daily) Brazil (Portuguese, daily) Mexico (Spanish, daily) Spain (Spanish, daily) France (French, daily) Italy (Italian, daily)
• Read our Data Protection Policy .

Subscribe to our global magazine

Our events and webinars

• pv magazine USA Week 2024 This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse...
• Roundtables Europe 2024 This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse...
• Avoiding costly risks for solar assets In this pv magazine Webinar, we will review various risks faced by solar assets, such as permitting and interconnectio...
• Market impacts of high efficiency HJT Heterojunction (HJT) products now represent a small but growing share of the market for PV modules. And this technolog...

pv magazine print

• Brazil is harvesting the benefits of solar Agriculture accounts for 21.5% of Brazil’s gross domestic product and 27% of its emissions. PV companies are now targe...
• Orcadian sea power The North Sea was once the oil capital of Europe but as onshore and offshore wind grows, the Orkney Islands are emergi...
• pv magazine test: June 2024 results <b>George Touloupas</b>, senior director of technology and quality at Clean Energy Associates (CEA), analyzes the June...
• Sponsored content: Runergy’s vertical integration helps it achieve supply chain traceability Adapting to market volatility, Runergy transitioned from its start as a technical services provider to establishing a ...

Keep up to date

This website uses cookies to anonymously count visitor numbers. View our privacy policy. ×

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Advances in Mixed Tin‑Lead Narrow‑Bandgap Perovskites for Single‑Junction and All‑Perovskite Tandem Solar Cells

• Yang, Fengjiu

Organic–inorganic metal‑halide perovskites have received great attention for photovoltaic (PV) applications owing to their superior optoelectronic properties and the unprecedented performance development. For single‑junction PV devices, although lead (Pb)‑based perovskite solar cells have achieved 26.1% efficiency, the mixed tin‑lead (Sn‑Pb) perovskites offer more ideal bandgap tuning capability to enable an even higher performance. The Sn‑Pb perovskite (with a bandgap tuned to ≈1.2 eV) is also attractive as the bottom subcell for a tandem configuration to further surpass the Shockley–Queisser radiative limit for the single‑junction devices. The performance of the all‑perovskite tandem solar cells has gained rapid development and achieved a certified efficiency up to 29.1%. In this article, the properties and recent development of state‑of‑the‑art mixed Sn‑Pb perovskites and their application in single‑junction and all‑perovskite tandem solar cells are reviewed. Recent advances in various approaches covering additives, solvents, interfaces, and perovskite growth are highlighted. The authors also provide the perspective and outlook on the challenges and strategies for further development of mixed Sn‑Pb perovskites in both efficiency and stability for PV applications.

• Open access
• Published: 17 July 2023

Recent advances in solar photovoltaic materials and systems for energy storage applications: a review

• Modupeola Dada   ORCID: orcid.org/0000-0002-9227-197X 1 &
• Patricia Popoola 1  

Beni-Suef University Journal of Basic and Applied Sciences volume  12 , Article number:  66 ( 2023 ) Cite this article

15k Accesses

27 Citations

1 Altmetric

Metrics details

In recent years, solar photovoltaic technology has experienced significant advances in both materials and systems, leading to improvements in efficiency, cost, and energy storage capacity. These advances have made solar photovoltaic technology a more viable option for renewable energy generation and energy storage. However, intermittent is a major limitation of solar energy, and energy storage systems are the preferred solution to these challenges where electric power generation is applicable. Hence, the type of energy storage system depends on the technology used for electrical generation. Furthermore, the growing need for renewable energy sources and the necessity for long-term energy solutions have fueled research into novel materials for solar photovoltaic systems. Researchers have concentrated on increasing the efficiency of solar cells by creating novel materials that can collect and convert sunlight into power.

Main body of the abstract

This study provides an overview of the recent research and development of materials for solar photovoltaic devices. The use of renewable energy sources, such as solar power, is becoming increasingly important to address the growing energy demand and mitigate the impact of climate change. Hence, the development of materials with superior properties, such as higher efficiency, lower cost, and improved durability, can significantly enhance the performance of solar panels and enable the creation of new, more efficient photovoltaic devices. This review discusses recent progress in the field of materials for solar photovoltaic devices. The challenges and opportunities associated with these materials are also explored, including scalability, stability, and economic feasibility.

The development of novel materials for solar photovoltaic devices holds great potential to revolutionize the field of renewable energy. With ongoing research and technological advancements, scientists and engineers have been able to design materials with superior properties such as higher efficiency, lower cost, and improved durability. These materials can be used to enhance the performance of existing solar panels and enable the creation of new, more efficient photovoltaic devices. The adoption of these materials could have significant implications for the transition toward a more sustainable and environmentally friendly energy system. However, there are still challenges to be addressed, such as scalability, stability, potential environmental effects, and economic feasibility, before these materials can be widely implemented. Nonetheless, the progress made in this field is promising and continued reports on the research and development of materials for solar photovoltaic devices are crucial for achieving a sustainable future. The adoption of novel materials in solar photovoltaic devices could lead to a more sustainable and environmentally friendly energy system, but further research and development are needed to overcome current limitations and enable large-scale implementation.

1 Background

Energy and environmental problems are at the top of the list of challenges in the world, attributed to the need to replace the combustion exhaust of fossil fuels, which has resulted in environmental contamination and the greenhouse effect as opposed to renewable energy sources [ 1 ]. This replacement will be achieved while keeping pace with the increasing consumption of energy resulting from an increase in population and rising demand from developing countries since the use of non-renewable energy sources would not meet the energy demand because they are an exhaustible and limited source of energy [ 2 ]. Thus, the search for clean and sustainable renewable energy resources has become an urgent priority. Researchers regard solar energy as one of the alternative sustainable energy resources that is low-cost, non-exhaustible, and abundantly available, giving solid and increasing output efficiencies compared to other sources of energy solutions and energy sources of renewable energy [ 3 ]. The sun radiates at 3.8 1023 kW, intercepting the Earth at 1.8 1014 kW, while the remaining energy is scattered, reflected, and taken in by clouds [ 4 ]. 1.7 × 1022 J of the energy from the sun in 1.5 days is equal to the energy produced from three trillion barrels of oil reserves on Earth [ 5 ]. The total annual energy used by the world in 1 year is 4 s.6 × 1020 J, and the sun provides this energy in 1 h [ 5 ]. The solar photovoltaic (SPV) industry heavily depends on solar radiation distribution and intensity. Solar radiation amounts to 3.8 million EJ/year, which is approximately 10,000 times more than the current energy needs [ 6 ]. Solar energy is used whether in solar thermal applications where solar energy is the source of heat or indirectly as a source of electricity in concentrated solar power plants, photo-assisted fuel cells, generating electricity in SPVs, hydrocarbons from CO 2 reduction, and fuels such as hydrogen [ 7 ].

Each technology harvests sunlight rays and converts them into different end forms. For instance, solar energy can be naturally converted into solar fuel through the process of photosynthesis. Also, through photosynthesis, plants store energy from the sun, where protons and electrons are produced, which can be further metabolized to produce H 2 and CH 4. Thus, 11% of solar energy is utilized in the natural photosynthesis of biomass [ 8 ]. Photovoltaics convert photons into electrons to get electrical energy, while in solar thermal applications, the photons are absorbed and their energy is converted into tangible heat [ 9 ]. This heat is used to heat a working fluid that can be directly collected and used for space and water heating [ 10 ].

However, the energy converted may be too low for consumption, and production efficiency can be improved by producing fuel from water and carbon dioxide through artificial bio-inspired nanoscale assemblies, connecting natural photosynthetic pathways in novel configurations, and using genetic engineering to facilitate biomass production [ 11 ]. One of the major challenges for photovoltaic (PV) systems remains matching intermittent energy production with dynamic power demand [ 12 , 13 ]. A solution to this challenge is to add a storage element to these intermittent power sources [ 14 , 15 ].

Furthermore, intermittent sources like SPV are allowed to address timely load demands and add flexibility to storage devices like batteries [ 16 , 17 ]. Nonetheless, compared with the photosynthesis process, which has conversion efficiencies of 5–10%, photovoltaic cells have better solar conversion efficiencies of approximately 22.5% [ 6 , 18 ]. There are other technologies used for enhancing the efficiency of PV systems encountered by temperature changes, which include floating tracking concentrating cooling systems (FTCC), hybrid solar photovoltaic/thermal systems (PV/T) cooled by water spraying, hybrid solar photovoltaic/thermoelectric (PV/TE) systems cooled by a heat sink, hybrid solar photovoltaic/thermal systems cooled by forced water circulation, improving the performance of solar panels through the use of phase change materials, and solar panels with water immersion cooling techniques [ 19 , 20 ]. SPV panels with transparent covering (photonic crystal cooling), hybrid solar photovoltaic/thermal systems (PV/T) having forced air circulation, and SPV panels with thermoelectric cooling [ 21 ]

This review discusses the latest advancements in the field of novel materials for solar photovoltaic devices, including emerging technologies such as perovskite solar cells. It evaluates the efficiency and durability of different generations of materials in solar photovoltaic devices and compares them with traditional materials. It investigates the scalability and cost-effectiveness of producing novel materials for solar photovoltaic devices and identifies the key challenges and opportunities associated with the development and implementation of novel materials in solar photovoltaic devices, such as stability, toxicity, and economic feasibility. Hence, proposing strategies to overcome current limitations and promote the large-scale implementation of novel materials in solar photovoltaic devices, including manufacturing processes and material characterization techniques, while assessing the potential environmental impact of using novel materials in solar photovoltaic devices, including the sustainability and carbon footprint of the production process.

2 Main text

2.1 solar photovoltaic systems.

Solar energy is used in two different ways: one through the solar thermal route using solar collectors, heaters, dryers, etc., and the other through the solar electricity route using SPV, as shown in Fig.  1 . A SPV system consists of arrays and combinations of PV panels, a charge controller for direct current (DC) and alternating current (AC); (DC to DC), a DC-to-AC inverter, a power meter, a breaker, and a battery or an array of batteries depending on the size of the system [ 22 , 23 ].

Schematic diagram of the solar photovoltaic systems

This technology converts sunlight directly into electricity, with no interface for conversion. It is pollutant-free during operation, rugged and simple in design, diminishes global warming issues, is modular, has a lower operational cost, offers minimal maintenance, can generate power from microwatts to megawatts, and has the highest power density compared to the other renewable energy technologies [ 24 , 25 ]. A high rate of 100 megawatts (MW) of capacity installed per day in 2013 has been used to illustrate the rise in research interest in PV systems, with a record of 177 gigawatts (GW) of overall PV capacity taking place in 2015 [ 26 , 27 ]. However, according to Nadia et al. [ 19 ], solar photovoltaic systems have considerable limitations, including high prices as compared to fossil fuel energy resources, low efficiency, and intermittent operation. Hence, the solar tracker systems shown in Fig.  2 were designed to mitigate some of these challenges by keeping the solar devices at the optimal angle to track the sun’s position for maximum power production.

Solar tracking systems

Various environmental pressures and characteristics, such as angle of photon incidence, panel orientation, photovoltaic module conductivity, the material of solar cells, and time to measure the direction of the sun, can all impact the output of solar panel cells; therefore, before using tracker systems, a large number of measurement results are necessary [ 29 ]. There are active and passive tracking systems. Active tracking systems move the solar panel toward the sun using motors and gear trains, while passive tracking systems rely on a low-boiling-point compressed gas fluid through canisters generated by solar heat [ 30 ]. The disadvantages of passive solar tracking systems are their reliance on weather conditions and the selection of the right gas and glass to develop an efficient passive solar tracking system since the glass absorption levels depend on the color, strength, and chemical properties of the glass. While active solar is high maintenance and reduces power output if the panel is not directly under the sun [ 31 ]. There are also single- and double-axis solar trackers and closed- and open-loop solar trackers. Some trackers use electro-optical units, while others use microprocessor units [ 32 ]. However, the initial cost and running cost of the tracking system, coupled with the cost of energy generated by a PV tracking system, are greater than the cost of energy generated by a fixed system, making their tracking system’s economic advantages unclear. Thus, most recent research on tracking systems has concentrated solely on the optimization of tracking technologies, with little attention devoted to all other critical elements influencing cost and efficiency, PV cell materials, temperature, solar radiation levels, transport, auxiliary equipment, and storage techniques [ 6 ]. Hence, the future outlook on tracking systems includes developing innovative ways for tracking the sun cost-effectively and efficiently. Jamroen et al. [ 32 ] proposed the design and execution of a low-cost dual-axis solar tracking system based on digital logic design and pseudo-azimuthal mounting systems. Their findings reveal that the suggested tracking system improves electrical energy efficiency by 44.89% on average with power costs of 0.2 $/kWh and 0.3 $/kWh, which is relatively low when compared to other tracking methods. Chowdhury et al. [ 35 ], on an 8-bit microcontroller architecture, developed a stand-alone low-cost yet high-precision dual-axis closed-loop sun-tracking system based on the sun position algorithm. Their simulation results showed a very high prediction rate and a very low mean square error, which was concluded to be better than neutral and fuzzy network principles as photovoltaic energy sources.

2.1.1 Photovoltaic energy sources

Photovoltaic energy sources are used as grid-connected systems and stand-alone systems. Their applications include battery charging, water pumping, home power supplies, refrigeration, street lighting, swimming pools, hybrid vehicles, heating systems, telecommunications, satellite power systems, military space, and hydrogen production [ 28 , 29 ]. SPV and storage systems are classified into grid-tied or grid-direct PV systems, off-grid PV systems, and grid/hybrid or grid interaction systems with energy storage [ 30 , 31 ]. The grid-tied solar PV system does not have a battery bank for storage, but a grid-tied inverter is used to convert the DC generated into AC; hence, power can be generated and utilized only during the daytime, which may also be a limiting factor [ 31 , 32 ]. However, the disadvantage of only using the system during the day can be overcome by using a battery bank to store the generated power during the daytime, but this new setup will eventually increase the cost of the system [ 6 , 34 ]. Hence, just using this system during the day makes the grid-tied SPV system very cost-effective, simple to design, easily manageable, and requires less maintenance. Furthermore, solar panels mostly produce more electricity than is required by the loads. Hence, this excess electricity can be given back to the grid instead of being stored in batteries [ 35 , 36 ].

The off-grid PV system, on the other hand, uses a battery for the storage of the generated electricity during the daytime, which can be used in the future or during any emergency. This is beneficial when the load cannot be easily connected to the grid [ 37 , 38 ]. This system not only gives sufficient energy to a household, but it can also power places that are far away from the grid; hence, these systems use more components and are comparatively more expensive than grid-direct systems. Grid-connected PV systems run in parallel and are linked to the electric utility grid [ 39 , 40 ]. The power conditioning unit (PCU) or inverter is the main component of grid-connected PV systems, converting the DC power produced by the PV array into AC power that meets the voltage and power quality requirements of the utility grid for either direct use of appliances or sending to the utility grid to earn feed-in tariff compensation [ 41 , 42 ]. Grid-connected PV systems without backup energy storage (ES) are environmentally friendly, while systems with backup ES are usually interconnected with the utility grid [ 43 , 44 ].

Essential characteristics of PV technology are the operating range of 1 kW up to 300 MW, which can be used as fuel on residential, commercial, and utility scales. The efficiency of PV cells is about 12–16% for crystalline silicon, 11–14% for thin film, and 6–7% for organic cells [ 44 ]. There is no direct environmental impact due to the lack of CO 2 , CO, and NO x emissions. These systems have low operating and maintenance costs. The few drawbacks are higher installation costs, fluctuating output power due to the variation in weather patterns, and the need for mechanical and electronic tracking devices and backup storage for maximum efficiency. Installation costs can vary from 600 to 1300 USD/kW, while operation and maintenance annual costs vary from 0.004 and 0.07 USD/kWh (ac) for utility-scale generation and grid-connected residential systems, respectively [ 21 ].

3 Solar photovoltaic materials

Solar photovoltaic materials shown in Fig.  3 , when exposed to light, absorb the light and transform the energy of the light photons into electrical energy. Commercially available photovoltaic systems are based on inorganic materials, which require costly and energy-intensive processing techniques.

Schematic diagram of the solar photovoltaic materials

Moreover, some of those materials, like CdTe, are toxic and have a limited natural abundance. These problems are preventable by using organic photovoltaics. Nonetheless, the effectiveness of organic-based photovoltaic cells is still far below that of solely inorganic-based photovoltaic systems. Photovoltaic devices usually employ semiconductor materials to generate energy, with silicon-based solar cells being the most popular. Photovoltaic (PV) cells or modules made of crystalline silicon (c-Si), whether single-crystalline (sc-Si) or multi-crystalline (c-Si) (mcSi). PV modules, which are fundamental components, can function in harsh outdoor environments and deliver high energy density to electronic loads. These are the most common forms of solar cells, accounting for over 90% of the PV industry. PV modules must have an efficiency of at least 14%, a price of less than 0.4 USD/Wp, and a service life of at least 15 years [ 22 ]. Now, wafer-based crystalline silicon technologies have best satisfied the criteria because of their high efficiency, cheap cost, and extended service life, and they are projected to dominate future PV power generation due to the abundance of materials. The greatest known energy conversion efficiency for research on crystalline silicon PV cells is 25%, although ordinary industrial cells are restricted to 15–18%. Optimizing these cells is a hard undertaking; hence, novel solutions to break past the efficiency barrier of 25% are wafer-slicing technologies and equipment for ultrathin (50 m) wafer technologies, and equipment for direct slicing ultrathin wafers with negligible kerf loss, solar cell and module manufacturing technologies and equipment based on ultrathin wafers. High-quality polycrystalline ingot technologies that outperform monocrystalline cells, contact-forming processes, and materials that are less expensive than screen-printed and burned silver paste are used. To reduce overall PV system costs, low-concentration, and high-efficiency module technologies are used [ 22 , 23 ].

Crystalline silicon solar cells are spectrally selective absorbers that are semiconductor devices. The percentage of incident solar irradiance absorbed by the cell is the absorption factor of a PV cell. Under operational settings, this absorption factor is one of the key criteria controlling cell temperature. The absorption factor may be calculated experimentally using reflection and transmission data. According to Santbergen et al. [ 23 ], using a two-dimensional (2D) computational model that agrees with experimental results, the AM1.5 absorption factor of a typical encapsulated c-Si photovoltaic cell can reach 90.5%. The existence of an appropriate steepness texture at the front of the c-Si wafer was used to obtain such a high absorption factor. As a result, by limiting reflecting losses over the solar spectrum, c-Si cell AM1.5 absorption may potentially be improved to 93.0%. Notably, there is widespread use of c-Si bifacial PV devices compared to their monofacial counterparts due to their potential to achieve a higher annual energy yield. Factors that promote these devices are the bifacial PV performance measurement method/standard for indoor characterization and comprehensive simulation models for outdoor performance characterization [ 24 ]. Non-commercial 3D tools such as PC3D, an open-source numerical analysis program for simulating the internal operation of silicon solar cells, have been reported to provide accurate simulation results that are only ≈1.7% different from their commercial counterparts [ 25 ]. In recent studies, Sun et al. [ 27 ] studied the high-efficiency silicon heterojunction solar cells, which were reported to be the next generation of crystalline silicon cells. The authors reported that increasing the efficiency limits can be achieved by increasing the short-circuit current while maintaining its high open-circuit voltage, and for mass production, there should be minimal consumption of indium and silver. Ibarra et al. [ 6 ] stated that high water quality is now commonplace for crystalline silicon ( c -Si)-based solar cells, meaning that the cell's efficiency potential is largely dictated by the effectiveness of its carrier-selective contacts based on highly doped-silicon, which can introduce negative side effects such as parasitic absorption. According to Chee et al. [ 37 ], carrier-selective crystalline silicon heterojunction (SHJ) solar cells have already achieved remarkable lab-scale efficiencies, with SiOx/heavily doped polycrystalline silicon (n + -/p + -poly-Si) creating the most attractive polysilicon-on-oxide (POLO) junctions.

As a result, industry trends will shift away from p-Si passivated emitter and rear polysilicon (PERPoly) designs and toward TOPCon architectures. Costals et al. [ 38 ] described how vanadium oxide films provide excellent surface passivation with effective lifetime values of up to 800 s and solar cells with efficiencies greater than 18%, shedding light on the possibilities of transition metal oxides deposited using the atomic layer deposition technique. To solve the challenge of realizing a high aspect ratio (AR) of the metal fingers in a bifacial (BF) copper-plated crystalline silicon solar cell, Han et al. [ 31 ] created a new type of hybrid-shaped Cu finger device, electromagnetically fabricated in a 2-step deposition BF plating process, which shows a front-side efficiency of 22.1% and a BF factor of 0.99. Finally, using a grading technique to increase the efficiency of c-Si solar cells, Pham et al. [ 32 ] attained a conversion efficiency of 22%.

Other materials currently in use are low-cost solar cells based on hybrid polymer semiconductor materials containing a light-harvesting material, which absorbs photons with energy equal to or greater than the energy of the band gap ( E g). This leads to the creation of excitons (bound electron–hole pairs) ranging from 5 to 15 nm in most organic semiconductors, which diffuse in the material and may either undergo dissociation to the separate charge carriers or recombination with the emission of energy [ 32 ]. To improve the dissociation of excitons and enhance the efficiency of the PV cell, the photoactive material is combined with a strong acceptor of electrons of high electron affinity. Then, the separated electrons and holes migrate through different materials in the internal electric field generated across the device and are accommodated by the appropriate collecting electrodes. Organic particle–polymer (PCBM-P3HT) solar cells’ conversion efficiencies are much lower than those obtained for semiconductor devices [ 6 ]. Recent research on hybrid cells discusses performance analysis and the parameter optimization of hybrid PV cells [ 34 , 35 ], while porous organic polymer cells have received current research attention for drug delivery and biomedical applications [ 36 , 37 , 38 ].

Thin films (TF) only represent 10% of the global PV market. However, researchers around the world are exploring other options to produce electricity more efficiently using solar cells; hence, R&D for developing new materials is currently going on. A strategic approach to tuning absorbance, grain size rearrangement, conductivity, morphology, topography, and stoichiometric compositions for absorber layer solar cell applications is the incorporation of foreign dopants in the CdSe host lattice. Chasta et al. [ 18 ] using the thermal-evaporation approach, thin films of CdSe:Cu alloys with 1%, 3%, and 5% Cu contents were grown and annealed at 350 °C. Because of their efficiency, simplicity of manufacturing, and low cost, hybrid organic–inorganic halides are regarded as excellent materials when utilized as the absorber layer in perovskite solar cells (PSCs). According to Marí-Guaita et al. [ 39 ], its lower efficiency using MASnI3 as an absorber is more stable, which could be improved by enhancing the bandgap alignment of MaSnI3 [ 39 ]. Tarbi et al. [ 40 ] stated that the physical parameters of the absorption coefficients are more related to the variation of pressure than the temperature variation and deformation of a double-junction solar cell (Jsc) equal to 47.03 mA/cm 2 , and this results in a shift from maximum current density to low voltages while retaining its maximum value of 36.03 mW/m 2 . According to Chaudhry et al. [ 49 ], improving the optical absorption and current density in an active layer, under the standard AM-1.5 solar spectra, is achieved through the inclusion of semiconductor nanoparticles (NPs). The efficiencies were raised by 10% for the aluminum nanoparticles (NPs) design and by 21% and 30% for solar cells with and without anti-reflective thin film coating, respectively. In another study, Al- and Cu-doped ZnO nanostructured films were deposited using a sputtering technique, and doping resulted in enhanced conductivity as well as improved mobility in Al–ZnO and Cu–ZnO films in comparison with pure ZnO films, resulting in efficiencies of 0.492% and 0.559% for Al–ZnO- and Cu–ZnO-based solar cells, respectively.

Dye-sensitized solar cells (DSC) shown in Fig.  4 are an alternative concept to present-day p–n junction photovoltaic devices for optoelectronics applications. DSC is made up of a cathode, a photoactive layer, an electrolyte, and an anode [ 53 ]. The functional layers for flexible DSC, notably the electrodes that also serve as active layer substrates, must be flexible. In contrast to typical systems in which the semiconductor performs both light absorption and charge carrier transport, light is absorbed by a sensitizer attached to the surface of a wide-band semiconductor in this system [ 54 ]. The dye sensitizer absorbs incoming sunlight and uses the energy to initiate a vectorial electron transfer process. Around 10% of overall solar-to-current conversion efficiencies (IPCE) have been achieved [ 55 ]. However, DSC has no practical conversion efficiency breakthrough and suffers from low mechanical stability and problematic sealing, but enhancing the properties of the sensitizers, metal oxide/semiconductor film, substrate, redox electrolyte, and counter electrode (CE) accelerates DSC applications [ 56 ].

Schematic diagram of the dye-sensitized solar cells (DSC)

The N3 dye was reported to be stable as a pure solid in the air up to 280 °C, where decarboxylation occurs. It lasts 108 redox cycles under long-term light with no obvious loss of function. Metal oxides, such as TiO 2 , SnO 2 , ZnO 2 , In 2 O 3 , CeO 3 , and NbO 3 , have been employed as photoanodes to investigate materials for effective photoanodes [ 57 ]. Hence, the breakthrough in DSC was the use of a high-surface-area nanoporous TiO 2 layer, and the outstanding stability is the very rapid deactivation of its excited state via charge injection into the TiO 2 , which occurs in the femtosecond time domain [ 58 ].

TiO 2 became the preferred semiconductor because of its low cost, non-toxicity, and abundance. Although the N3/N3 + pair exhibits reversible electrochemical activity in various organic solvents, showing that the lifespan of N3 + is at least several seconds under these conditions, the oxidized form of N3 + , the dye created by electron injection, is significantly less stable [ 59 ]. However, when maintained in the oxidized state, the dye degrades through the loss of sulfur. To avoid this undesirable side reaction, regeneration of the N3 in the photovoltaic cell should occur quickly, i.e., within nanoseconds or microseconds [ 60 ]. Cell failure may occur due to the circumstances of the dye renewal. Recent advances in the field of sensitizers for these devices have resulted in dyes that absorb over the visible spectrum, resulting in better efficiencies. The DSC may be based on a huge internal interface prepared in a simple laboratory environment without strict demands on the purity of the materials or the absence of a built-in electric field. DSC offers low production costs and, interestingly, much lower investment costs compared with conventional PV technologies. It offers flexibility, lightweight, and design opportunities, such as transparency and multicolor options (building integration, consumer products, etc.). There is feedstock availability to reach the terawatt scale, and there is also a short energy payback time (< 1 year), where the enhanced performance is under real outdoor conditions, which are relatively better than competitors at diffuse light and higher temperatures [ 61 ].

In high-efficiency DSCs, ruthenium (Ru) complex dyes and organic solvent-based electrolytes such as N719, N3, and black dye are commonly utilized. Ru dyes, on the other hand, are costly and require a complicated chemical method. Its products, such as ruthenium oxide (RuO 4 ), are also very poisonous and volatile. Organic solvents are also poisonous, ecologically dangerous, and explosive, and their low surface tension can cause leakage difficulties [ 48 , 50 , 52 ]. Hence, organic solvents and Ru-based complex dyes may need to be replaced to realize low-cost, biocompatible, and environmentally benign devices. Water and natural dyes derived from plants could be excellent alternatives, according to Kim et al. [ 56 ]. Yadav et al. [ 60 ] assembled TiO 2  nanorod (NR)-based hibiscus dye with different counter electrodes such as carbon, graphite, and gold. The authors measured efficiencies of 0.07%, 0.10%, and 0.23%, respectively. The key to the breakthrough for DSCs in 1991 was the use of a mesoporous TiO 2 electrode with a high internal surface area to support the monolayer of a sensitizer and the increase in surface area by using mesoporous electrodes [ 42 ]. The standard DSC dye was tris (2,2′-bipyridyl-4,4′-carboxylate) ruthenium (II) (N3 dye), and the carboxylate group in the dye attaches the semiconductor oxide substrate by chemisorption; hence, when the photon is absorbed, the excited state of the dye molecule will relax by electron injection to the semiconductor conduction band. Since 1993, the photovoltaic performance of N3 dye has been irreplaceable by other dye complexes [ 42 ]. Bandara et al. [ 43 ] mentioned that recent developments comprising textile DSCs are being looked at for their sustainability, flexibility, pliability, and lightweight properties, as well as the possibility of using large-scale industrial manufacturing methods (e.g., weaving and screen printing) [ 62 ].

A conducting polymer such as pyrrole was electrochemically polymerized on a porous nanocrystalline TiO 2 electrode, which was sensitized by N3 dye. Polypyrrole successfully worked as a whole transport layer, connecting dye molecules anchored on TiO2 to the counter electrode. Conducting polyaniline has also been used in solid-state solar cells sensitized with methylene blue.

Light-emitting diodes based on halide perovskites have limited practical uses [ 63 ]. Additional drawbacks of the technique include a lack of knowledge of the influence of the electric field on mobile ions present in perovskite materials, a drop in external quantum efficiency at high current density, and limited device lifetimes [ 63 , 64 ]. Nonetheless, the technology has advanced rapidly in recent years, and it can currently provide external quantum efficiencies of more than 21%, equivalent to silicon solar cells [ 64 ]. Perovskite solar cells (PSCs) were created in the same way as other SPV materials like organic photovoltaics, dye-sensitized solar cells, and vacuum-processed PVs such as CdTe and CIGSOne. PSCs have a high open-circuit voltage (VOC), which distinguishes them from all other photovoltaics (PVs). The loss in VOC induced by non-radiative recombination in the case of PSCs is significantly low, even as low as that reported for vacuum-processed Si. By enhancing the high open-circuit voltage VOC, all-inorganic and tin-based perovskites have the potential to exceed the Shockley–Queisser (S–Q) limitations [ 65 ]. Luo et al. [ 80 ] used a (FAPbI 3 )0.95(MAPbBr 3 )0.05 perovskite to produce a VOC of 1.11 V and an efficiency of 21.73% using a new fluorinated iron (III) porphine dopant for PTAA. Unlike Wu et al. [ 81 ], who achieved a 1.59 eV hybrid perovskite, the Jen group obtained a VOC of 1.21 V and a high efficiency of 22.31%.

Carbon nanotubes (CNTs) have demonstrated a significant potential for enhancing polymer material characteristics. CNTs have better electrical and thermal conductivity, they are highly stiff, robust, and tough. Combining CNTs with brittle materials allows one to convey some of the CNTs' appealing mechanical qualities to the resultant composites, making CNT a good choice for reinforcement in polymeric materials. Zhu et al. [ 109 ] used carbon nanotubes (CNTs) with single walls to strengthen the epoxy Epon 862 matrix. The molecular dynamics method is used to investigate three periodic systems: a long CNT-reinforced Epon 862 composite, a short CNT-reinforced Epon 862 composite, and the Epon 862 matrix itself. The stress–strain relationships and elastic Young's moduli along the longitudinal direction (parallel to CNT) are simulated, and the results are compared to those obtained using the rule-of-mixture. Their findings reveal that when longitudinal strain rises, the Young's modulus of CNT increases whereas that of the Epon 862 composite or matrix drops. Furthermore, a long CNT may significantly increase the Epon 862 composite's Young's modulus (approximately 10 times stiffer), which is consistent with the prediction based on the rule-of-mixture at low strain level. Even a short CNT can improve the Young's modulus of the Epon 862 composite, with a 20% increase when compared to the Epon 862 matrix. Sui et al. [ 110 ] made CNT/NR composites after CNTs were treated in an acid bath and then ball-milled using HRH bonding methods. The thermal properties, vulcanization properties, and mechanical properties of CNT/NR composites were studied. When compared to CB, the absorption of CNTs into NR was quicker and consumed less energy. CNT/NR composites' over-curing reversion was reduced. The dispersion of CNTs in the rubber matrix and the interaction between CNTs and the matrix enhanced after acid treatment and ball milling. When compared to plain NR and CB/NR composites, the addition of treated CNTs improved the performance of the CNT/reinforced NR composites. Medupin et al. [ 111 ] used multi-walled carbon nanotube (WMCNT) reinforced natural rubber (NR) polymer nanocomposite (PNC) for prosthetic foot applications. On an open two-roll mill, the components were mixed according to the ASTM D-3182 standard during vulcanization. The nanocomposites (NCs) were cured in an electrically heated hydraulic press for 10 min at a temperature of 1502 °C and a pressure of 0.2 MPa. Mechanical testing found that NR/ MWCNT-3 had the maximum tensile and dynamic loading capability (449.79 MPa). It also had better filler dispersion, which increased crystallinity and cross-linking. The newly created prosthetic material is also said to have better wear resistance than conventional prosthetic materials as shown in Fig.  5 . The developed nanocomposite from MWCNTs for reinforced natural rubber is suited for the construction of the anthropomorphic prosthetic foot.

Wear rate of the carbon nanotube composites

4 Efficiency, stability, and scalability of solar photovoltaic materials

4.1 economic feasibility.

The economic feasibility of solar photovoltaic devices refers to their cost-effectiveness compared to other sources of energy. In the past, solar panels were relatively expensive, and their high cost made them less attractive to many consumers. However, in recent years, the cost of solar panels has dropped significantly, making them much more affordable. Recent advances in SPV technologies have driven this cost reduction in manufacturing technology and economies of scale. Additionally, many governments around the world offer incentives and subsidies to encourage the use of renewable energy sources like solar power, further increasing their economic feasibility. Angmo et al. [ 77 ] prepared polymer solar cell modules directly on thin flexible barrier polyethylene terephthalate foil, which is a cost-effective alternative to ITO-based devices with potential applications in information, communications, and mobile technology (ICT) where low humidity (50%) and lower temperatures (65 °C) are expected and operational lifetimes over one year are estimated.

4.2 PV device efficiencies

Several procedures are required to generate electricity from PVs. Strongly bonded holes and electron pairs, known as photo-produced excitons, are formed by incoming light and separated at the interface between the donor and acceptor. Materials with a greater electron affinity take electrons, while materials with a low electronization potential admit holes. The produced electrons and holes are then carried through the p-type and n-type material phases, respectively, toward both electrodes, resulting in an external photocurrent flow. Hence, the efficiency of power conversion in organic solar cells is determined by the combination of the following steps: dissociation of electron–hole pairs at the p-n interface; exciton formation following incoming solar light absorption; charge collection at the electrodes; and transport of electrons and holes to both electrodes. The first-generation solar cell has a recorded performance of around 15–20%, as displayed in Fig.  6 . The second-generation solar cell is made of amorphous silicon, CdTe, and CIGS and has a 4–15% efficiency. Because second-generation technologies do not rely on silicon wafers, they are less expensive than first-generation technologies.

Solar photovoltaic materials and their efficiencies

Hence, first-generation solar cells have higher reported efficiencies than thin-film solar cells, but they are more expensive due to the use of pure silicon in the production process. Thin-film solar cells, on the other hand, use less material, take less time, and are less expensive. Solar cells of the first generation are non-toxic and bountiful in nature. Second-generation solar cells have a lower per-watt price and efficiency when compared to other technologies. Organic materials and polymers are used in the third-generation solar cell. As compared to other varieties, the third-generation solar cell is more efficient and less expensive. The process for producing third-generation cells is simple and unique, but it has yet to be verified. The third-generation new kind of solar cell technology, the perovskite solar cell, has a record efficiency of more than 25% [ 78 ]. Nevertheless, UV light, oxygen, and moisture can all contribute to the poor stability of polycrystalline perovskite materials, the most pressing issue that must be addressed before the application of perovskite photovoltaic technology is the long-term stability of PSCs [ 79 ].

4.3 Stability of photovoltaics

The stability of solar photovoltaic devices refers to their ability to maintain their efficiency and reliability over time. In the past, solar panels had a reputation for being unreliable due to their sensitivity to weather and the environment. However, modern solar panels are much more stable and durable than earlier versions. They can withstand extreme temperatures and harsh weather conditions, making them suitable for use in a wide range of environments. Additionally, advances in solar panel technology have made them more efficient, which means they produce more energy for longer periods. However, increasing the long-term stability of perovskite solar cells is currently one of the most crucial concerns. According to Lee et al. [ 94 ], nanoscale metal–organic frameworks (MOFs) with chemically, moistly, and thermally stable nanostructures have better PSCs’ stability as well as higher device performance, which has increased the interest of the perovskite photovoltaic community in recent times. This can be attributed to MOF’s flexible structure, considerable pore volume, high surface area, high concentration of active metal sites, controllable topology, and tuneable pore diameters [ 81 ]. MOFs are used to improve device stability in applications such as gas separation and storage, optoelectronics, and catalysis devices [ 67 , 82 , 83 ]. Furthermore, to improve operational stability in hybrid perovskite solar cells, a thorough understanding of photodegradation and thermal degradation processes is required [ 84 ]. Additionally, interfacial engineering with hydrophobic materials, or the 2D/3D concept, has significantly improved long-term stability.

4.4 Scalability of photovoltaics

Furthermore, the ability of solar photovoltaic devices to meet rising energy demands is referred to as their scalability. Solar panels can be installed on a wide range of structures, from homes to commercial and industrial structures. They can also be scaled up for utility-scale power generation, allowing solar energy to power entire communities. Furthermore, advancements in solar panel manufacturing have increased their efficiency, allowing them to be more scalable in terms of the amount of energy they can produce from a given surface area. The challenges for scaling up perovskite solar cells include developing scalable deposition strategies for the uniform coating of all device layers over large-area substrates, including the perovskite photoactive layer, electron-transport layer (ETL), hole-transport layer (HTL), and electrodes. Other challenges include developing procedures for fabrication and achieving better control of film formation across the device stack at large scales by improving the precursor chemistry to match the processing methods. Nonetheless, despite the challenges, in 2019, a stable solid-state perovskite solar cell with a certified power conversion efficiency (PCE) of 25.2% was recorded [ 75 ]. Although small-area cells are extremely efficient, scaling-up technology is required for commercialization. Scalable Technologies is now focused on high-efficiency module production and large-area perovskite coating, where dimethyl sulfoxide or N, N-dimethylformamide (DMF), which are perovskite precursor solutions used for spin coating and scalable depositions, may not be feasible due to sluggish evaporation and significant interactions with Lewis acid precursors. For producing a homogeneous perovskite coating over a large area substrate, Park [ 87 ] suggested using acetonitrile or 2-methoxyethanol solvents, while Li et al. [ 89 ] mentioned blade coating, meniscus coating, slot-die coating, spray coating, screen-printing, inkjet printing, and electrodeposition as scalable solution deposition processes for perovskite development. Altinkaya et al. [ 90 ] reported that tin oxide (SnO 2 ) is a scalable alternative to mesoporous titanium dioxide (TiO 2 )/compact TiO 2 stacks as electron-selective layers (ESLs) due to its wide bandgap, high carrier mobility, high optical transmission, decent chemical stability, and suitable band alignment with perovskites.

Finally, the scalability, stability, and economic feasibility of solar photovoltaic devices have all improved significantly in recent years. Advances in technology and manufacturing have made solar panels more efficient and affordable, while incentives and subsidies have encouraged their use. As a result, solar energy is becoming an increasingly popular source of renewable energy capable of meeting growing energy demands sustainably and reliably.

5 Environmental effects of solar photovoltaics

PV systems are recognized as clean and long-term energy sources. Although PV systems may generate little pollution while in operation, the environmental effects of such systems observed from manufacture through disposal must not be disregarded. The environmental problems of PV systems include the generation of hazardous chemicals, the pollution of water resources, and the emission of air pollutants during the production process, and the impact of PV installations on land utilization. According to Tawalbeh et al. [ 68 ], by improving PV design, recycling solar cell materials to reduce GHG emissions by up to 42%, creating novel materials with improved properties, improving cell lifespans, avoiding hazardous components, recycling, and making careful site selection, the negative environmental impacts of PV systems may be considerably reduced. These mitigation actions will reduce greenhouse gas (GHG) emissions, restrict solid waste accumulation, and save essential water resources. PV systems have a carbon footprint of 14–73 CO 2 -eq/kWh, which is 10 to 53 orders of magnitude lower than the emissions observed from oil burning (742 CO2-eq/kWh from oil). The carbon footprint of the PV system might be lowered by using novel production materials. When compared to traditional solid oxide fuel cells (SOFCs), Smith et al. [ 69 ] proposed the use of these novel material combinations leads to a reduction in embodied materials and toxicological impact, but a higher electrical energy consumption during manufacturing. Their findings provide support for the drive to reduce the operating temperatures of SOFCs using unique material designs, resulting in a lower overall environmental impact due to the lower operational energy from the constituents of the selected material. Blanco et al. [ 70 ] reported that thin-film silicon and dye-sensitized cells lead the way in terms of total environmental impact, followed by thin-film chalcogenide, organic, and silicon. Chetyrkina et al. [ 71 ] analyzed the constituents of perovskite cells for their environmental hazards: lead, tin, or bismuth iodide on the one hand, and methylammonium, formamidinium, or cesium iodide on the other. The authors stated that bismuth iodide was the least hazardous in the first round of cell testing. Cesium and formamidinium iodides were less harmful to cells than methylammonium iodide. This study argued that their reports show that perovskite cells will fully phase out silicon-based cells since the former is not as toxic as the latter [ 72 ].

6 Summary and outlook

Covalent organic frameworks (COFs) have been reported to exhibit covalent bond-supported crystallinity as well as capture and mass transport characteristics [ 90 ]. Organic semiconductors are gaining popularity in research, and materials for organic electronics are currently intensively researched for other purposes, such as organic photovoltaics, large-area devices, and thin-film transistors, benefiting from the emergence of non-fullerene acceptors (NFAs) and the organic light-emitting diode (OLED) [ 91 ]. There have also been reports of issues arising from applications such as displays on flexible substrates, OLED lighting, huge area displays, and printable or solution processible greater area solar cells. Inorganic halide templates in carbon nanotubes of 1.2 nm, which are currently the smallest halide perovskite structures, have been reported to function as solar cells [ 92 ]. While other research has developed strategies to increase the durability of perovskites by using computer models based on density functional theory (DFT) to determine which molecules would be best at bridging the perovskite layer and the charge transport layers since the interface between the perovskite layer and the next layers is a critical location of vulnerability in perovskite solar cells. The results showed that inverted perovskite solar cells containing 1,3-bis(diphenylphosphine)propane, or DPPP, had the best performance because the cell's total power conversion efficiency remained high for around 3,500 h [ 93 ].

There are also environmental problems with PV systems, from production through installation and disposal [ 94 ]. Moreso, because perovskites are unstable, they must be protected with transparent polymers. Perovskite decomposes into chemicals that may pose environmental and human health hazards when this protection deteriorates [ 95 ]. Hence, PV solar systems have a carbon footprint of 14–73 g CO 2 -eq/kWh, which is lower than gas (607.6 CO 2 -eq/kWh), oil (742.1 CO 2 -eq/kWh), and coal-fired (975.3 g CO 2 -eq/kWh) power plants. New materials and/or recycled silicon material can reduce GHG emissions by up to 50% [ 96 ]. Floating PV systems and self-cleaning installations offer the benefit of using less water during the cleaning process. Except during installation, the PV modules have little noise and visual impact [ 97 ]. The life cycle analysis revealed that PV systems cannot be considered zero-emission technology due to the potential environmental effects imposed by land use, air quality, water use, the inclusion of hazardous materials, and possible noise/visual pollution; however, these effects can be mitigated by novel technologies such as hybrid power systems and/or floating PV systems [ 98 , 99 , 100 ]. Overall, future materials for solar photovoltaic devices must balance efficiency, cost, durability, toxicity, availability, and integration to provide a sustainable and cost-effective source of renewable energy [ 100 , 101 , 102 , 103 , 104 , 105 , 106 , 107 , 108 ].

7 Conclusion

Recent advancements in solar photovoltaic (PV) materials and systems have resulted in considerable efficiency, cost, and durability improvements. PV has become a more realistic choice for a wide range of applications, including power production, water pumping, and space exploration, as a result of these advancements. The creation of high-efficiency crystalline silicon (c-Si) solar cells has been one of the most significant recent developments in PV technology. C-Si solar cells can currently convert more than 20% of the sun's energy into electricity.

This is a huge advance over early c-Si solar cells, which could only convert roughly 10% of the sun's energy into power. The creation of thin-film solar cells is another significant recent advancement in PV technology. Thin-film solar cells are constructed from substantially thinner materials than c-Si solar cells. As a result, they are lighter and less expensive to produce. Thin-film solar cells are also more flexible than c-Si solar cells, allowing them to be used in a broader range of applications. In addition to advancements in PV materials, substantial advancements in PV systems have occurred. PV systems today feature a number of components that aid in efficiency, durability, and dependability.

Solar trackers, inverters, and batteries are among the components. PV has become a more realistic choice for a wide range of applications due to advancements in PV materials and systems. PV is currently used to power homes and businesses, as well as to pump water and power satellites and other spacecraft. PV technology is expected to become more commonly employed in the future as it improves.

Other recent advances in solar PV materials and systems include the development of new materials, such as perovskites, that have the potential to achieve even higher efficiencies than c-Si solar cells, the development of new manufacturing processes that can lower the cost of PV modules, and the development of new PV applications, such as solar-powered cars and homes. These advancements make solar PV a more appealing alternative for a broader range of applications. As the cost of PV continues to fall, solar PV is anticipated to become the major form of renewable energy in the future.

Availability of data and material

Not applicable.

Abbreviations

• Solar photovoltaic

Photovoltaic

Floating tracking concentrating cooling system

Hybrid solar photovoltaic/thermal system

Hybrid solar photovoltaic/thermoelectric

Hybrid solar photovoltaic/thermal

Direct current

Alternating current

Power conditioning unit

• Energy storage

Two-dimensional

Three-dimensional)

Silicon heterojunction

Polysilicon-on-oxide

Perovskite solar cells

Open-circuit voltage

Junction solar cell

Nanoparticles

Dye-sensitized solar cells

Counter electrode

Shockley–Queisser

Information and communications and mobile technology

Ultraviolet

Metal–organic frameworks

Electron-transport layer

Hole-transport layer

Power conversion efficiency

N-dimethylformamide

Electron-selective layers

Solid oxide fuel cells

Covalent organic frameworks

Non-fullerene acceptors

Organic light-emitting diode

Density functional theory

1,3 Bis(diphenylphosphino)propane

Greenhouse gas

Gong J, Liang J, Sumathy K (2012) Review on dye-sensitized solar cells (DSSCs): fundamental concepts and novel materials. Renew Sustain Energy Rev 16(8):5848–5860

Article   CAS   Google Scholar  

Dubacheva GV, Liang CK, Bassani DM (2012) Functional monolayers from carbon nanostructures–fullerenes, carbon nanotubes, and graphene–as novel materials for solar energy conversion. Coord Chem Rev 256(21–22):2628–2639

Lim EL, Yap CC, Jumali MHH, Teridi MAM, Teh CH (2018) A mini review: can graphene be a novel material for perovskite solar cell applications? Nano-micro Lett 10:1–12

Article   Google Scholar  

Ohshita Y, Suzuki H, Kojima N, Tanaka T, Honda T, Inagaki M, Yamaguchi M (2011) Novel material for super high efficiency multi-junction solar cells. J Cryst Growth 318(1):328–331

Chen J, Cao Y (2009) Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices. Acc Chem Res 42(11):1709–1718

Article   CAS   PubMed   Google Scholar  

Hayat MB, Ali D, Monyake KC, Alagha L, Ahmed N (2019) Solar energy—a look into power generation, challenges, and a solar-powered future. Int J Energy Res 43(3):1049–1067

Casper F, Graf T, Chadov S, Balke B, Felser C (2012) Half-Heusler compounds: novel materials for energy and spintronic applications. Semicond Sci Technol 27(6):063001

Mozer AJ, Sariciftci NS (2006) Conjugated polymer photovoltaic devices and materials. C R Chim 9(5–6):568–577

Kannan N, Vakeesan D (2016) Solar energy for future world: a review. Renew Sustain Energy Rev 62:1092–1105

Meinel AB, Meinel MP (1977) Applied solar energy: an introduction. NASA STI/Recon Tech Report A 77:33445

Google Scholar  

Gordon J, Gordon JM (eds) (2001) Solar energy: the state of the art: ISES position papers

Chen CJ (2011) Physics of solar energy. Wiley

Book   Google Scholar  

Sayigh AAM (ed) (2012) Solar energy engineering. Elsevier

Gong J, Li C, Wasielewski MR (2019) Advances in solar energy conversion. Chem Soc Rev 48(7):1862–1864

Fang B, Xing Z, Sun D, Li Z, Zhou W (2022) Hollow semiconductor photocatalysts for solar energy conversion. Adv Powder Mater 1(2):100021

Rabaia MKH, Abdelkareem MA, Sayed ET, Elsaid K, Chae KJ, Wilberforce T, Olabi AG (2021) Environmental impacts of solar energy systems: a review. Sci Total Environ 754:141989

Sodiqjon K, Begyor S, Aleksandr K, Farrukh D, Mukhtasar M, Akbarjon A (2022) Prospective aspects of using solar energy. J New Century Innovat 18(1):142–148

Chasta G, Suthar D, Thakur A, Kannan MD, Dhaka MS (2022) Comprehensive investigation on influence of copper doping on physical properties of CdSe thin films for solar cell applications. Mater Res Bull 152:111845

Ding T, Zhou Y, Ong WL, Ho GW (2021) Hybrid solar-driven interfacial evaporation systems: beyond water production towards high solar energy utilization. Mater Today 42:178–191

Hoeven MVD (2015) Technology roadmap: solar photovoltaic energy. International Energy Agency, Paris, France

Siecker J, Kusakana K, Numbi EB (2017) A review of solar photovoltaic systems cooling technologies. Renew Sustain Energy Rev 79:192–203

Saga T (2010) Advances in crystalline silicon solar cell technology for industrial mass production. NPG Asia Mater 2(3):96–102

Santbergen R, van Zolingen RC (2008) The absorption factor of crystalline silicon PV cells: a numerical and experimental study. Sol Energy Mater Sol Cells 92(4):432–444

Liang TS, Pravettoni M, Deline C, Stein JS, Kopecek R, Singh JP, Luo W, Wang Y, Aberle AG, Khoo YS (2019) A review of crystalline silicon bifacial photovoltaic performance characterisation and simulation. Energy Environ Sci 12(1):116–148

Zhao J, Xu Z, Law MK, Heidari H, Abdellatif SO, Imran MA, Ghannam R (2021) Simulation of crystalline silicon photovoltaic cells for wearable applications. IEEE Access 9:20868–20877

Benda V, Černá L (2020) PV cells and modules–State of the art, limits and trends. Heliyon 6(12):e05666

Article   PubMed   PubMed Central   Google Scholar  

Sun Z, Chen X, He Y, Li J, Wang J, Yan H, Zhang Y (2022) Toward efficiency limits of crystalline silicon solar cells: recent progress in high-efficiency silicon heterojunction solar cells. Adv Energy Mater 12(23):2200015

Nadia AR, Isa NAM, Desa MKM (2018) Advances in solar photovoltaic tracking systems: a review. Renew Sustain Energy Rev 82:2548–2569

Hightower M, Pierce SA (2008) The energy challenge. Nature 452(7185):285–286

Chong KK, Wong CW (2009) General formula for on-axis sun-tracking system and its application in improving tracking accuracy of solar collector. Sol Energy 83(3):298–305

Nsengiyumva W, Chen SG, Hu L, Chen X (2018) Recent advancements and challenges in solar tracking systems (STS): a review. Renew Sustain Energy Rev 81:250–279

Jamroen C, Komkum P, Kohsri S, Himananto W, Panupintu S, Unkat S (2020) A low-cost dual-axis solar tracking system based on digital logic design: Design and implementation. Sustain Energy Technol Assessm 37:100618

Ibarra Michel J, Dréon J, Boccard M, Bullock J, Macco B (2023) Carrier-selective contacts using metal compounds for crystalline silicon solar cells. Progress Photovoltaics Res Appl 31(4):380–413

Jamroen C, Komkum P, Kohsri S, Himananto W, Panupintu S, Unkat S (2020) A low-cost dual-axis solar tracking system based on digital logic design: design and implementation. Sustain Energy Technol Assess 37:100618

Chowdhury ME, Khandakar A, Hossain B, Abouhasera R (2019) A low-cost closed-loop solar tracking system based on the sun position algorithm. J Sensors

Chee KW, Ghosh BK, Saad I, Hong Y, Xia QH, Gao P, Ye J, Ding ZJ (2022) Recent advancements in carrier-selective contacts for high-efficiency crystalline silicon solar cells: Industrially evolving approach. Nano Energy 95:106899

Costals ER, Masmitjà G, Almache E, Pusay B, Tiwari K, Saucedo E, Raj CJ, Kim BC, Puigdollers J, Martin I, Voz C (2022) Atomic layer deposition of vanadium oxide films for crystalline silicon solar cells. Mater Adv 3(1):337–345

Han C, Yang G, Procel P, O’Connor D, Zhao Y, Gopalakrishnan A, Zhang X, Zeman M, Mazzarella L, Isabella O (2022) Controllable simultaneous bifacial Cu-plating for high-efficiency crystalline silicon solar cells. Solar RRL 6(6):2100810

Pham DP, Yi J (2022) Dopant-grading proposal for polysilicon passivating contact in crystalline silicon solar cells. J Power Sources 522:231005

.Skompska, M. (2010) Hybrid conjugated polymer/semiconductor photovoltaic cells. Synth Met 160(1–2):1–15

Singh A, Sharma A, Rajput S, Bose A, Hu X (2022) An investigation on hybrid particle swarm optimization algorithms for parameter optimization of PV cells. Electronics 11(6):909

Cotfas DT, Cotfas PA, Mahmoudinezhad S, Louzazni M (2022) Critical factors and parameters for hybrid photovoltaic-thermoelectric systems; review. Appl Therm Eng, p 118977

Tang Y, Varyambath A, Ding Y, Chen B, Huang X, Zhang Y, Yu DG, Kim I, Song W (2022) Porous organic polymers for drug delivery: hierarchical pore structures, variable morphologies, and biological properties. Biomater Sci

Kim JH, Kang DW, Yun H, Kang M, Singh N, Kim JS, Hong CS (2022) Post-synthetic modifications in porous organic polymers for biomedical and related applications. Chem Soc Rev 51(1):43–56

Zhu Y, Xu P, Zhang X, Wu D (2022) Emerging porous organic polymers for biomedical applications. Chem Soc Rev 51(4):1377–1414

Marí-Guaita J, Bouich A, Shafi MA, Bouich A, Marí B (2022) Investigation on the stability and efficiency of MAPbI3 and MASnI3 thin films for solar cells. Phys Status Solidi 219(5):2100664

Tarbi A, Chtouki T, Bouich A, Elkouari Y, Erguig H, Migalska-Zalas A, Aissat A (2022) InP/InGaAsP thin films based solar cells: lattice mismatch impact on efficiency. Opt Mater 131:112704

Chaudhry FA, Escandell L, López-Fraguas E, Vergaz R, Sánchez-Pena JM, García-Cámara B (2022) Light absorption enhancement in thin film GaAs solar cells using dielectric nanoparticles. Sci Rep 12(1):9240

Article   CAS   PubMed   PubMed Central   Google Scholar  

O’regan B, Grätzel M (1991) A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO 2 films. Nature 353(6346):737–740

Bandara TMWJ, Hansadi JMC, Bella F (2022) A review of textile dye-sensitized solar cells for wearable electronics. Ionics 28(6):2563–2583

Shahzad N, Perveen T, Pugliese D, Haq S, Fatima N, Salman SM, Tagliaferro A, Shahzad MI (2022) Counter electrode materials based on carbon nanotubes for dye-sensitized solar cells. Renew Sustain Energy Rev 159:112196

Alizadeh A, Roudgar-Amoli M, Bonyad-Shekalgourabi SM, Shariatinia Z, Mahmoudi M, Saadat F (2022) Dye sensitized solar cells go beyond using perovskite and spinel inorganic materials: a review. Renew Sustain Energy Rev 157:112047

Venkatesan S, Lin WH, Hsu TH, Teng H, Lee YL (2022) Indoor dye-sensitized solar cells with efficiencies surpassing 26% using polymeric counter electrodes. ACS Sustain Chem Eng 10(7):2473–2483

Devadiga D, Selvakumar M, Shetty P, Santosh MS (2022) The integration of flexible dye-sensitized solar cells and storage devices towards wearable self-charging power systems: a review. Renew Sustain Energy Rev 159:112252

Kim JH, Kim DH, So JH, Koo HJ (2022) Toward eco-friendly dye-sensitized solar cells (DSSCs): natural dyes and aqueous electrolytes. Energies 15(1):219

De Freitas ES, Da Silva PB, Chorilli M, Batista AA, Lopes EDO, da Silva MM, Leite CQF, Pavan FR (2014) Nanostructured lipid systems as a strategy to improve the in vitro cytotoxicity of ruthenium (II) compounds. Molecules 19(5):5999–6008

Dragutan I, Dragutan V, Demonceau A (2017) Special issue on ruthenium complexes. Molecules 22(2):255

Tojo G, Fernández M, Tojo G, Fernández M (2007) Ruthenium tetroxide and other ruthenium compounds. Oxidation of primary alcohols to carboxylic acids: a guide to current common practice, pp 61–78

Yadav SC, Sharma A, Devan RS, Shirage PM (2022) Role of different counter electrodes on performance of TiO 2 based dye-sensitized solar cell (DSSC) fabricated with dye extracted from Hibiscus Sabdariffa as sensitizer. Opt Mater 124:112066

Grätzel M (2003) Dye-sensitized solar cells. J Photochem Photobiol, C 4(2):145–153

Hagfeldt A, Boschloo G, Sun L, Kloo L, Pettersson H (2010) Dye-sensitized solar cells. Chem Rev 110(11):6595–6663

Wei D (2010) Dye sensitized solar cells. Int J Mol Sci 11(3):1103–1113

Kalyanasundaram K (2010) Dye-sensitized solar cells. CRC Press

Nazeeruddin MK, Baranoff E, Grätzel M (2011) Dye-sensitized solar cells: a brief overview. Sol Energy 85(6):1172–1178

Chiba Y, Islam A, Watanabe Y, Komiya R, Koide N, Han L (2006) Dye-sensitized solar cells with conversion efficiency of 111%. Jpn J Appl Phys 45(7L):L638

Hardin BE, Snaith HJ, McGehee MD (2012) The renaissance of dye-sensitized solar cells. Nat Photonics 6(3):162–169

Tawalbeh M, Al-Othman A, Kafiah F, Abdelsalam E, Almomani F, Alkasrawi M (2021) Environmental impacts of solar photovoltaic systems: a critical review of recent progress and future outlook. Sci Total Environ 759:143528

Smith L, Ibn-Mohammed T, Yang F, Reaney IM, Sinclair DC, Koh SL (2019) Comparative environmental profile assessments of commercial and novel material structures for solid oxide fuel cells. Appl Energy 235:1300–1313

Blanco CF, Cucurachi S, Peijnenburg WJ, Beames A, Vijver MG (2020) Are technological developments improving the environmental sustainability of photovoltaic electricity? Energ Technol 8(11):1901064

Chetyrkina MR, Kameneva L, Mishchenko DV, Klimanova EN, Sashenkova TE, Allayarova UY, Kostyuk SV, Frolova LA, Aldoshin SM, Troshin PA (2023) Lead, tin, bismuth or organics: assessment of potential environmental and human health hazards originating from mature perovskite PV technology. Sol Energy Mater Sol Cells 252:112177

Li C, Wang X, Bi E, Jiang F, Park SM, Li Y, Chen L, Wang Z, Zeng L, Chen H, Liu Y (2023) Rational design of Lewis base molecules for stable and efficient inverted perovskite solar cells. Science 379(6633):690–694

Ning Z, Fu Y, Tian H (2010) Improvement of dye-sensitized solar cells: what we know and what we need to know. Energy Environ Sci 3(9):1170–1181

Law M, Greene LE, Johnson JC, Saykally R, Yang P (2005) Nanowire dye-sensitized solar cells. Nat Mater 4(6):455–459

Kashtiban RJ, Patrick CE, Ramasse Q, Walton RI, Sloan J (2022) Picoperovskites: the smallest conceivable isolated halide perovskite structures formed within carbon nanotubes. Adv Mater, 2208575

Tan S, Huang T, Yavuz I, Wang R, Yoon TW, Xu M, Xing Q, Park K, Lee DK, Chen CH, Zheng R (2022) Stability-limiting heterointerfaces of perovskite photovoltaics. Nature 605(7909):268–273

Lin R, Xu J, Wei M, Wang Y, Qin Z, Liu Z, Wu J, Xiao K, Chen B, Park SM, Chen G (2022) All-perovskite tandem solar cells with improved grain surface passivation. Nature 603(7899):73–78

Li H, Zhou J, Tan L, Li M, Jiang C, Wang S, Zhao X, Liu Y, Zhang Y, Ye Y, Tress W (2022) Sequential vacuum-evaporated perovskite solar cells with more than 24% efficiency. Sci Adv 8(28):eabo7422

Article   PubMed   Google Scholar  

DuBose JT, Kamat PV (2022) Efficacy of perovskite photocatalysis: challenges to overcome. ACS Energy Lett 7(6):1994–2011

Luo J, Lin F, Xia J, Yang H, Zhang R, Malik HA, Shu H, Wan Z, Han K, Wang R, Yao X (2021) An efficient and hydrophobic molecular doping in perovskite solar cells. Nano Energy 82:105751

Wu S, Zhang J, Li Z, Liu D, Qin M, Cheung SH, Lu X, Lei D, So SK, Zhu Z, Jen AKY (2020) Modulation of defects and interfaces through alkylammonium interlayer for efficient inverted perovskite solar cells. Joule 4(6):1248–1262

Friederich P, Fediai A, Kaiser S, Konrad M, Jung N, Wenzel W (2019) Toward design of novel materials for organic electronics. Adv Mater 31(26):1808256

Yang Y, Börjesson K (2022) Electroactive covalent organic frameworks: a new choice for organic electronics. Trends Chem 4(1):60–75

Tareen AK, Khan K, Rehman S, Iqbal M, Yu J, Zhou Z, Yin J, Zhang H (2022) Recent development in emerging phosphorene based novel materials: progress, challenges, prospects and their fascinating sensing applications. Prog Solid State Chem 65:100336

Mahato N, Sharma K, Sinha M, Baral ER, Koteswararao R, Dhyani A, Cho MH, Cho S (2020) Bio-sorbents, industrially important chemicals and novel materials from citrus processing waste as a sustainable and renewable bioresource: a review. J Adv Res 23:61–82

Verduci R, Romano V, Brunetti G, Yaghoobi Nia N, Di Carlo A, D’Angelo G, Ciminelli C (2022) Solar energy in space applications: review and technology perspectives. Adv Energy Mater 12(29):2200125

Park NG (2020) Research direction toward scalable, stable, and high efficiency perovskite solar cells. Adv Energy Mater 10(13):1903106

Green M, Dunlop E, Hohl-Ebinger J, Yoshita M, Kopidakis N, Hao X (2021) Solar cell efficiency tables (version 57). Prog Photovoltaics Res Appl 29(1):3–15

Li Z, Klein TR, Kim DH, Yang M, Berry JJ, Van Hest MF, Zhu K (2018) Scalable fabrication of perovskite solar cells. Nat Rev Mater 3(4):1–20

Altinkaya C, Aydin E, Ugur E, Isikgor FH, Subbiah AS, De Bastiani M, Liu J, Babayigit A, Allen TG, Laquai F, Yildiz A (2021) Tin oxide electron-selective layers for efficient, stable, and scalable perovskite solar cells. Adv Mater 33(15):2005504

Angmo D, Gevorgyan SA, Larsen-Olsen TT, Søndergaard RR, Hösel M, Jørgensen M, Gupta R, Kulkarni GU, Krebs FC (2013) Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules. Org Electron 14(3):984–994

Kim M, Jeong J, Lu H, Lee TK, Eickemeyer FT, Liu Y, Choi IW, Choi SJ, Jo Y, Kim HB, Mo SI (2022) Conformal quantum dot–SnO 2 layers as electron transporters for efficient perovskite solar cells. Science 375(6578):302–306

Wang HP, Li S, Liu X, Shi Z, Fang X, He JH (2021) Low-dimensional metal halide Perovskite photodetectors. Adv Mater 33(7):2003309

Lee CC, Chen CI, Liao YT, Wu KCW, Chueh CC (2019) Enhancing efficiency and stability of photovoltaic cells by using perovskite/Zr-MOF heterojunction including bilayer and hybrid structures. Adv Sci 6(5):1801715

Exposing unsaturated Cu 1 -O 2 sites in nanoscale Cu-MOF for efficient electrocatalytic hydrogen evolution

Zou YH, Huang YB, Si DH, Yin Q, Wu QJ, Weng Z, Cao R (2021) Porous metal–organic framework liquids for enhanced CO 2 adsorption and catalytic conversion. Angew Chem 133(38):21083–21088

Ehrling S, Reynolds EM, Bon V, Senkovska I, Gorelik TE, Evans JD, Rauche M, Mendt M, Weiss MS, Pöppl A, Brunner E (2021) Adaptive response of a metal–organic framework through reversible disorder–disorder transitions. Nat Chem 13(6):568–574

Nicks J, Sasitharan K, Prasad RR, Ashworth DJ, Foster JA (2021) Metal–organic framework nanosheets: programmable 2D materials for catalysis, sensing, electronics, and separation applications. Adv Func Mater 31(42):2103723

Juarez-Perez EJ, Ono LK, Maeda M, Jiang Y, Hawash Z, Qi Y (2018) Photodecomposition and thermal decomposition in methylammonium halide lead perovskites and inferred design principles to increase photovoltaic device stability. J Mater Chem A 6(20):9604–9612

Ueoka N, Oku T (2018) Stability characterization of PbI2-added CH3NH3PbI3–x Cl x photovoltaic devices. ACS Appl Mater Interfaces 10(51):44443–44451

Rajvikram M, Leoponraj S (2018) A method to attain power optimality and efficiency in solar panel. Beni-Suef Univ J Basic Appl Sci 7(4):705–708

Abouelregal AE, Akgöz B, Civalek Ö (2023) Magneto-thermoelastic interactions in an unbounded orthotropic viscoelastic solid under the Hall current effect by the fourth-order Moore–Gibson–Thompson equation. Comput Math Appl 141:102–115

Civalek Ö, Uzun B, Yaylı MÖ (2022) An effective analytical method for buckling solutions of a restrained FGM nonlocal beam. Comput Appl Math 41(2):67

Jalaei MH, Thai HT, Civalek Ӧ (2022) On viscoelastic transient response of magnetically imperfect functionally graded nanobeams. Int J Eng Sci 172:103629

Numanoğlu HM, Ersoy H, Akgöz B, Civalek Ö (2022) A new eigenvalue problem solver for thermo-mechanical vibration of Timoshenko nanobeams by an innovative nonlocal finite element method. Math Methods Appl Sci 45(5):2592–2614

Abouelregal AE, Ersoy H, Civalek Ö (2021) Solution of Moore–Gibson–Thompson equation of an unbounded medium with a cylindrical hole. Mathematics 9(13):1536

Akgöz B, Civalek Ö (2022) Buckling analysis of functionally graded tapered microbeams via Rayleigh-Ritz method. Mathematics 10(23):4429

Dastjerdi S, Akgöz B, Civalek Ö (2020) On the effect of viscoelasticity on behavior of gyroscopes. Int J Eng Sci 149:103236

Ashery MH, Elnouby M, EL-Maghraby EM, Elsehly EM (2023) Structural control of V 2 O 5 nanoparticles via a thermal decomposition method for prospective photocatalytic applications. Beni-Suef Univ J Basic Appl Sci 12(1):1–15

Zhu R, Pan E, Roy AK (2007) Molecular dynamics study of the stress–strain behavior of carbon-nanotube reinforced Epon 862 composites. Mater Sci Eng, A 447(1–2):51–57

Sui G, Zhong W, Yang X, Zhao S (2007) Processing and material characteristics of a carbon-nanotube-reinforced natural rubber. Macromol Mater Eng 292(9):1020–1026

Medupin RO, Abubakre OK, Abdulkareem AS, Muriana RA, Abdulrahman AS (2019) Carbon nanotube reinforced natural rubber nanocomposite for anthropomorphic prosthetic foot purpose. Sci Rep 9(1):1–11

Download references

Acknowledgements

The authors acknowledge the Surface Engineering Research Laboratory (SERL)

Author information

Authors and affiliations.

Chemical, Metallurgical and Materials Engineering, Tshwane University of Technology, Pretoria, 0183, South Africa

Modupeola Dada & Patricia Popoola

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Modupeola Dada .

Ethics declarations

Ethics approval and consent to participate, consent for publication, competing interests.

Authors declare that there are no conflicting interests.

Additional information

Publisher's note.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/ .

Reprints and permissions

About this article

Cite this article.

Dada, M., Popoola, P. Recent advances in solar photovoltaic materials and systems for energy storage applications: a review. Beni-Suef Univ J Basic Appl Sci 12 , 66 (2023). https://doi.org/10.1186/s43088-023-00405-5

Download citation

Received : 31 March 2023

Accepted : 06 July 2023

Published : 17 July 2023

DOI : https://doi.org/10.1186/s43088-023-00405-5

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Laser metal deposition
• Arc melting

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

• View all journals
• Explore content
• About the journal
• Publish with us
• Sign up for alerts

Solar cells articles within Scientific Reports

Article 17 July 2024 | Open Access

Comprehensive investigation of material properties and operational parameters for enhancing performance and stability of FASnI 3 -based perovskite solar cells

• Rania Saleh Alqurashi

Article 04 July 2024 | Open Access

Device modeling of high performance and eco-friendly \({\text {FAMASnI}}_{3}\) based perovskite solar cell

• Alireza Alipour
•  &  Hossein Alipour

Article 26 June 2024 | Open Access

Improving structural and magnetic properties of zinc stannate thin films through nickel doping via sol–gel method

• Ibrahim Cinar

Article 20 May 2024 | Open Access

Performance and optimization study of selected 4-terminal tandem solar cells

• Zeinab shokrollahi
• , Mina Piralaee
•  &  Asghar Asgari

Article 16 May 2024 | Open Access

Sustainable coatings for green solar photovoltaic cells: performance and environmental impact of recyclable biomass digestate polymers

• Aiyeshah Alhodaib
• , Zeinebou Yahya
•  &  M. Javed Idrisi

Article 30 April 2024 | Open Access

Functional soft robotic composites based on organic photovoltaic and dielectric elastomer actuator

• Ahmed Miguel Román Abolhosen
• , Shinyoung Lee
•  &  Jun Shintake

Article 17 January 2024 | Open Access

Highly efficient emerging Ag 2 BaTiSe 4 solar cells using a new class of alkaline earth metal-based chalcogenide buffers alternative to CdS

• Kaviya Tracy Arockiya Dass
• , M. Khalid Hossain
•  &  Latha Marasamy

Article 03 November 2023 | Open Access

Comprehensive analysis of heterojunction compatibility of various perovskite solar cells with promising charge transport materials

• Shayan Tariq Jan
•  &  Muhammad Noman

Article 30 October 2023 | Open Access

Morphological investigation and 3D simulation of plasmonic nanostructures to improve the efficiency of perovskite solar cells

• Mohammad Hosein Mohammadi
• , Mehdi Eskandari
•  &  Davood Fathi

Article 21 October 2023 | Open Access

Shedding light on the environmental impact of the decomposition of perovskite solar cell

• Negin Sabahi
•  &  Hashem Shahroosvand

Article 04 October 2023 | Open Access

Comprehensive guidance for optimizing the colloidal quantum dot (CQD) Perovskite solar cells: experiment and simulation

• , Mohammad Javadian Sarraf
•  &  Leili Motevalizadeh

Article 26 September 2023 | Open Access

Impact of compact TiO 2 interface modification on the crystallinity of perovskite solar cells

• Saemi Takahashi
• , Satoshi Uchida
•  &  Hiroshi Segawa

Article 23 September 2023 | Open Access

Design of optimized photonic-structure and analysis of adding a SiO 2 layer on the parallel CH 3 NH 3 PbI 3 /CH 3 NH 3 SnI 3 perovskite solar cells

Article 21 September 2023 | Open Access

Mask and plate: a scalable front metallization with low-cost potential for III–V-based tandem solar cells enabling 31.6 % conversion efficiency

• Jörg Schube
• , Oliver Höhn
•  &  Roman Keding

Article 11 September 2023 | Open Access

Dust mitigation by a water droplet in between movable and modified wetting states surfaces

• Ghassan Hassan
• , Abba Abdulhamid Abubakar
•  &  Hussain Al-Qahtani

Article 18 August 2023 | Open Access

Humidifying, heating and trap-density effects on triple-cation perovskite solar cells

• Leila Yadegari
• , Zahra Rastegar Moghadamgohari
•  &  Reza Rasuli

Article 01 August 2023 | Open Access

Modelling the effect of defects and cracks in solar cells’ performance using the d1MxP discrete model

• Ricardo A. Marques Lameirinhas
• , Catarina P. Correia V. Bernardo
•  &  Pedro Mendonça dos Santos

Article 11 July 2023 | Open Access

Persistent Dirac for molecular representation

• , Ginestra Bianconi
•  &  Kelin Xia

Article 10 July 2023 | Open Access

Contactless quasi-steady-state photoconductance (QSSPC) characterization of metal halide perovskite thin films

• Benjamin Grimm
• , Sascha J. Wolter
•  &  Jan Schmidt

Article 09 July 2023 | Open Access

Dual spin max pooling convolutional neural network for solar cell crack detection

• Sharmarke Hassan
•  &  Mahmoud Dhimish

Article 06 July 2023 | Open Access

Robust perovskite formation via vacuum thermal annealing for indoor perovskite solar cells

• Kwanchai Penpong
• , Chaowaphat Seriwatanachai
•  &  Pongsakorn Kanjanaboos

Article 22 May 2023 | Open Access

Performance analyses of highly efficient inverted all-perovskite bilayer solar cell

• Alireza Gholami-Milani
• , Sohrab Ahmadi-Kandjani
•  &  Mir Hojjat Kermani

Article 09 May 2023 | Open Access

In-depth analysis on PTB7 based semi-transparent solar cell employing MoO 3 /Ag/WO 3 contact for advanced optical performance and light utilization

• Erman Çokduygulular
• , Çağlar Çetinkaya
•  &  Barış Kınacı

Article 14 April 2023 | Open Access

Photoexcitation of perovskite precursor solution to induce high-valent iodoplumbate species for wide bandgap perovskite solar cells with enhanced photocurrent

• Atittaya Naikaew
• , Taweewat Krajangsang

Article 22 March 2023 | Open Access

Reduced bimolecular charge recombination in efficient organic solar cells comprising non-fullerene acceptors

• , Yungui Li
•  &  Gert-Jan A. H. Wetzelaer

Editorial 16 March 2023 | Open Access

Perovskite photovoltaics: stability and scalability

Perovskite solar cells must overcome the long-term stability problem in order to be put into practical use. Materials science, through the development of synthetic chemistry, materials characterization and device engineering can contribute to improvements in stability and scalability towards enabling large scale production. This Collection presents recent research efforts in stabilizing perovskite solar cells with three interconnected themes: characterizing instability, synthesizing stable perovskites and curing the interfaces.

• , Lakshminarayana Polavarapu
•  &  Paola Vivo

Article 24 February 2023 | Open Access

Hydroxycinnamic acid derivatives for UV-selective and visibly transparent dye-sensitized solar cells

• Arum Dista Wulansari
• , Dini Hayati
•  &  Jongin Hong

Article 20 February 2023 | Open Access

Improving morphology and optoelectronic properties of ultra-wide bandgap perovskite via Cs tuning for clear solar cell and UV detection applications

• Myo Zin Tun
• , Pimsuda Pansa-Ngat

Article 13 February 2023 | Open Access

An extensive study on multiple ETL and HTL layers to design and simulation of high-performance lead-free CsSnCl 3 -based perovskite solar cells

• M. Khalid Hossain
• , G. F. Ishraque Toki
•  &  Muhammad Mushtaq

Article 04 February 2023 | Open Access

A numerical study on the relationship between the doping and performance in P3HT:PCBM organic bulk heterojunction solar cells

• Hossein Movla
• , Afshin Shahalizad

Article 25 January 2023 | Open Access

Effect of different end-capped donor moieties on non-fullerenes based non-covalently fused-ring derivatives for achieving high-performance NLO properties

• Muhammad Khalid
• , Iqra Shafiq
•  &  Muhammad Safwan Akram

Article 21 December 2022 | Open Access

Field study on the severity of photovoltaic potential induced degradation

• Ghadeer Badran

Article 12 November 2022 | Open Access

Enhancement of color and photovoltaic performance of semi-transparent organic solar cell via fine-tuned 1D photonic crystal

• Çağlar Çetinkaya
• , Erman Çokduygulular
•  &  Süleyman Özçelik

Article 10 November 2022 | Open Access

Impact of dynamic co-evaporation schemes on the growth of methylammonium lead iodide absorbers for inverted solar cells

• Robert Heidrich
• , Karl L. Heinze
•  &  Paul Pistor

Article 03 November 2022 | Open Access

Stability and degradation in triple cation and methyl ammonium lead iodide perovskite solar cells mediated via Au and Ag electrodes

• Kakaraparthi Kranthiraja
• , Mritunjaya Parashar
•  &  Anupama B. Kaul

Article 29 October 2022 | Open Access

Ultrafast photoinduced dynamics of a donor-( \(\mathrm \pi\) )bridge-acceptor based merocyanine dye

• Jianwei Shen
•  &  Zhenrong Sun

Article 20 October 2022 | Open Access

Environmentally friendly, highly efficient, and large stokes shift-emitting ZnSe:Mn 2+ /ZnS core/shell quantum dots for luminescent solar concentrators

• Nyamsuren Byambasuren
• , A-Ra Hong
•  &  Ho Seong Jang

Article 12 September 2022 | Open Access

Epitaxial growth of SiGe films by annealing Al–Ge alloyed pastes on Si substrate

• Keisuke Fukuda
• , Satoru Miyamoto
•  &  Noritaka Usami

Study of wide bandgap SnO x thin films grown by a reactive magnetron sputtering via a two-step method

•  &  A. Slaoui

Article 02 September 2022 | Open Access

Thermal annealing effects on tunnel oxide passivated hole contacts for high-efficiency crystalline silicon solar cells

• Yong-Jin Kim
• , I Se Kweon
•  &  Ka-Hyun Kim

Article 01 September 2022 | Open Access

Visualizing localized, radiative defects in GaAs solar cells

• Behrang H. Hamadani
• , Margaret A. Stevens
•  &  Kenneth J. Schmieder

Article 27 August 2022 | Open Access

Transfer learning strategies for solar power forecasting under data scarcity

• Elissaios Sarmas
• , Nikos Dimitropoulos
•  &  Haris Doukas

Article 27 July 2022 | Open Access

Impact of dopant-induced band tails on optical spectra, charge carrier transport, and dynamics in single-crystal CdTe

• Patrik Ščajev
• , Algirdas Mekys
•  &  Santosh K. Swain

Article 21 July 2022 | Open Access

Synthesis of novel MoWO 4 with ZnO nanoflowers on multi-walled carbon nanotubes for counter electrode application in dye-sensitized solar cells

• Yonrapach Areerob
• , Chaowalit Hamontree
•  &  Kongsak Pattarith

Article 16 July 2022 | Open Access

Rapid testing on the effect of cracks on solar cells output power performance and thermal operation

• Mahmoud Dhimish
•  &  Yihua Hu

Article 04 July 2022 | Open Access

Highly improved light harvesting and photovoltaic performance in CdTe solar cell with functional designed 1D-photonic crystal via light management engineering

Article 23 June 2022 | Open Access

A novel hybrid GWO–PSO-based maximum power point tracking for photovoltaic systems operating under partial shading conditions

• Smail Chtita
• , Saad Motahhir
•  &  S. S. Askar

Article 17 June 2022 | Open Access

Thermally-induced drift of A-site cations at solid–solid interface in physically paired lead halide perovskites

• Daniele T. Cuzzupè
• , Feray Ünlü
•  &  Sanjay Mathur

Article 14 June 2022 | Open Access

Amorphous carbon nitride dual-function anti-reflection coating for crystalline silicon solar cells

• Ali J. Addie
• , Raid A. Ismail
•  &  Mudhafar A. Mohammed

Article 25 May 2022 | Open Access

Unraveling the reasons behind lead phthalocyanine acting as a good absorber for near-infrared sensitive devices

• Masahiro Kato
• , Hayato Yoshizawa
•  &  Jun Onoe

Browse broader subjects

• Photochemistry
• Materials for energy and catalysis
• Photovoltaics

Quick links

• Explore articles by subject
• Guide to authors
• Editorial policies

Accessibility Links

• Skip to content
• Skip to search IOPscience
• Skip to Journals list
• Accessibility help
• Accessibility Help

Click here to close this panel.

Purpose-led Publishing is a coalition of three not-for-profit publishers in the field of physical sciences: AIP Publishing, the American Physical Society and IOP Publishing.

Together, as publishers that will always put purpose above profit, we have defined a set of industry standards that underpin high-quality, ethical scholarly communications.

We are proudly declaring that science is our only shareholder.

Solar photovoltaic technology: A review of different types of solar cells and its future trends

Mugdha V Dambhare 1 , Bhavana Butey 1 and S V Moharil 2

Published under licence by IOP Publishing Ltd Journal of Physics: Conference Series , Volume 1913 , International Conference on Research Frontiers in Sciences (ICRFS 2021) 5th-6th February 2021, Nagpur, India Citation Mugdha V Dambhare et al 2021 J. Phys.: Conf. Ser. 1913 012053 DOI 10.1088/1742-6596/1913/1/012053

Article metrics

14803 Total downloads

Share this article

Author e-mails.

[email protected]

Author affiliations

1 G H Raisoni College of Engineering, Nagpur, India

2 Department of Physics, PGTD, Nagpur

Buy this article in print

The Sun is source of abundant energy. We are getting large amount of energy from the Sun out of which only a small portion is utilized. Sunlight reaching to Earth's surface has potential to fulfill all our ever increasing energy demands. Solar Photovoltaic technology deals with conversion of incident sunlight energy into electrical energy. Solar cells fabricated from Silicon aie the first generation solar cells. It was studied that more improvement is needed for large absorption of incident sunlight and increase in efficiency of solar cells. Thin film technology and amorphous Silicon solar cells were further developed to meet these conditions. In this review, we have studied a progressive advancement in Solar cell technology from first generation solar cells to Dye sensitized solar cells, Quantum dot solar cells and some recent technologies. This article also discuss about future trends of these different generation solar cell technologies and their scope to establish Solar cell technology.

Export citation and abstract BibTeX RIS

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence . Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

Information

• Author Services

Initiatives

You are accessing a machine-readable page. In order to be human-readable, please install an RSS reader.

All articles published by MDPI are made immediately available worldwide under an open access license. No special permission is required to reuse all or part of the article published by MDPI, including figures and tables. For articles published under an open access Creative Common CC BY license, any part of the article may be reused without permission provided that the original article is clearly cited. For more information, please refer to https://www.mdpi.com/openaccess .

Feature papers represent the most advanced research with significant potential for high impact in the field. A Feature Paper should be a substantial original Article that involves several techniques or approaches, provides an outlook for future research directions and describes possible research applications.

Feature papers are submitted upon individual invitation or recommendation by the scientific editors and must receive positive feedback from the reviewers.

Editor’s Choice articles are based on recommendations by the scientific editors of MDPI journals from around the world. Editors select a small number of articles recently published in the journal that they believe will be particularly interesting to readers, or important in the respective research area. The aim is to provide a snapshot of some of the most exciting work published in the various research areas of the journal.

Original Submission Date Received: .

• Active Journals
• Find a Journal
• Proceedings Series
• For Authors
• For Reviewers
• For Editors
• For Librarians
• For Publishers
• For Societies
• For Conference Organizers
• Open Access Policy
• Institutional Open Access Program
• Special Issues Guidelines
• Editorial Process
• Research and Publication Ethics
• Article Processing Charges
• Testimonials
• Preprints.org
• SciProfiles
• Encyclopedia

Article Menu

• Subscribe SciFeed
• Recommended Articles
• Google Scholar
• on Google Scholar
• Table of Contents

Find support for a specific problem in the support section of our website.

Please let us know what you think of our products and services.

Visit our dedicated information section to learn more about MDPI.

JSmol Viewer

Advancements and challenges in perovskite-based photo-induced rechargeable batteries and supercapacitors: a comparative review.

Graphical Abstract

1. Introduction

1.1. background, perovskite materials, 1.2. energy storage systems, 1.2.1. libs, 2. working mechanism, 2.1. mechanism of solar cells, 2.2. mechanism of libs during the charging and discharging process, 2.3. mechanism of the photo-battery.

Click here to enlarge figure

3. Materials Demand

4. technological challenges and opportunities, 4.1. design of pscs, 4.2. design of photo-batteries, 5. recent developments in photo-battery technology, 5.1. design integration, 5.2. chemistry integration, 6. conclusions, author contributions, acknowledgments, conflicts of interest.

• Xu, J.; Chen, Y.; Dai, L. Efficiently photo-charging Li-ion battery by perovskite solar cell. Nat. Commun. 2015 , 6 , 8103. [ Google Scholar ] [ CrossRef ]
• Tewari, N.; Lam, D.; Li, C.H.A.; Jonathan, E. Halper Recent advancements in batteries and photo-batteries using metal halide perovskites. APL Mater. 2022 , 10 , e040905. [ Google Scholar ] [ CrossRef ]
• Haight, R.; Haensch, W.; Friedman, D. Solar-powering the Internet of Things. Science 2016 , 353 , 124–125. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Ahmad, S.; Copic, D.; George, C.; De Volder, M. Hierarchical assemblies of carbon nanotubes for ultraflexible Li-ion batteries. Adv. Mater. 2016 , 28 , 6705–6710. [ Google Scholar ] [ CrossRef ]
• Chen, J.; Huang, Y.; Zhang, N.; Zou, H.; Liu, R.; Tao, C.; Fan, X.; Wang, Z.L. Micro-cable structured textile for simultaneously harvesting solar and mechanical energy. Nat. Energy 2016 , 1 , 16138. [ Google Scholar ] [ CrossRef ]
• Zhou, G.; Li, F.; Cheng, H.-M. Progress in flexible lithium batteries and future prospects. Energy Environ. Sci. 2014 , 7 , 1307–1338. [ Google Scholar ] [ CrossRef ]
• Zhou, G.; Sun, J.; Jin, Y.; Chen, W.; Zu, C.; Zhang, R.; Qiu, Y.; Zhao, J.; Zhuo, D.; Liu, Y.; et al. Sulfiphilic nickel phosphosulfide enabled Li2S impregnation in 3D graphene cages for Li-S batteries. Adv. Mater. 2017 , 29 , 1603366. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Zhang, N.; Chen, J.; Huang, Y.; Guo, W.; Yang, J.; Du, J.; Fan, X.; Tao, C. A Wearable All-Solid Photovoltaic Textile. Adv. Mater. 2016 , 28 , 263–269. [ Google Scholar ] [ CrossRef ]
• Vlad, A.; Singh, N.; Galande, C.; Ajayan, P.M. Design considerations for unconventional electrochemical energy storage architectures. Adv. Energy Mater. 2015 , 5 , 1402115. [ Google Scholar ] [ CrossRef ]
• Xu, J.; Wu, H.; Lu, L.; Leung, S.-F.; Chen, D.; Chen, X.; Fan, Z.; Shen, G.; Li, D. Integrated photo-supercapacitor based on bi-polar TiO 2 nanotube arrays with selective one-side plasma-assisted hydrogenation. Adv. Funct. Mater. 2014 , 24 , 1840–1846. [ Google Scholar ] [ CrossRef ]
• Méndez, M.A.; Peljo, P.; Scanlon, M.D.; Vrubel, H.; Girault, H.H. Photo-ionic cells: Two solutions to store solar energy and generate electricity on demand. J. Phys. Chem. C 2014 , 118 , 16872–16883. [ Google Scholar ] [ CrossRef ]
• Miyasaka, T.; Ikeda, N.; Murakami, T.N.; Teshima, K. Light energy conversion and storage with soft carbonaceous materials that solidify mesoscopic electrochemical interfaces. Chem. Lett. 2007 , 36 , 480–487. [ Google Scholar ] [ CrossRef ]
• Thimmappa, R.; Paswan, B.; Gaikwad, P.; Devendrachari, M.C.; Makri Nimbegondi Kotresh, H.; Rani Mohan, R.; Pattayil Alias, J.; Thotiyl, M.O. Chemically chargeable photo battery. J. Phys. Chem. C 2015 , 119 , 14010–14016. [ Google Scholar ] [ CrossRef ]
• Paolella, A.; Faure, C.; Bertoni, G.; Marras, S.; Guerfi, A.; Darwiche, A.; Hovington, P.; Commarieu, B.; Wang, Z.; Prato, M.; et al. Light-assisted delithiation of lithium iron phosphate nanocrystals towards photo-rechargeable lithium ion batteries. Nat. Commun 2017 , 8 , 14643. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Nguyen, O.; Courtin, E.; Sauvage, F.; Krins, N.; Sanchez, C.; Laberty-Robert, C. Shedding light on the light-driven Li-ion de-insertion reaction: Towards the design of a photo-rechargeable battery. J. Mater. Chem. A 2017 , 5 , 5927–5933. [ Google Scholar ] [ CrossRef ]
• Ahmad, S.; George, C.; Beesley, D.J.; Baumberg, J.J.; De Volder, M. Photo-Rechargeable Organo-Halide Perovskite Batteries. Nano Lett. 2018 , 18 , 1856–1862. [ Google Scholar ] [ CrossRef ]
• Armaroli, N.; Balzani, V. Towards an electricity-powered world. Energy Environ. Sci. 2011 , 4 , 3193–3222. [ Google Scholar ] [ CrossRef ]
• Weinstein, L.A.; Loomis, J.; Bhatia, B.; Bierman, D.M.; Wang, E.N.; Chen, G. Concentrating solar power. Chem. Rev. 2015 , 115 , 12797–12838. [ Google Scholar ] [ CrossRef ]
• Kruitwagen, L.; Story, K.T.; Friedrich, J.; Byers, L.; Skillman, S.; Hepburn, C. A global inventory of solar photovoltaic generating units-dataset. Nature 2021 , 598 , 604–611. [ Google Scholar ] [ CrossRef ]
• Um, H.D.; Choi, K.H.; Hwang, I.; Kim, S.H.; Seo, K.; Lee, S.Y. Monolithically integrated, photo-rechargeable portable power sources based on miniaturized Si solar cells and printed solid-state LIBs. Energy Environ. Sci. 2017 , 10 , 931–940. [ Google Scholar ] [ CrossRef ]
• Zeng, Q.; Lai, Y.; Jiang, L.; Liu, F.; Hao, X.; Wang, L.; Green, M.A. Integrated photorechargeable energy storage system: Next-generation power source driving the future. Adv. Energy Mater. 2020 , 10 , 1903930. [ Google Scholar ] [ CrossRef ]
• Zhang, X.; Song, W.L.; Tu, J.; Wang, J.; Wang, M.; Jiao, S. A review of integrated systems based on PSCs and energy storage units: Fundamental, progresses, challenges, and perspectives. Adv. Sci. 2021 , 8 , 2100552. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Gurung, A.; Reza, K.M.; Mabrouk, S.; Bahrami, B.; Pathak, R.; Lamsal, B.S.; Rahman, S.I.; Ghimire, N.; Bobba, R.S.; Chen, K.; et al. Rear-Illuminated Perovskite Photorechargeable Lithium Battery. Adv. Funct. Mater. 2020 , 30 , 2001865. [ Google Scholar ] [ CrossRef ]
• Hodes, G.; Manassen, J.; Cahen, D. Photoelectrochemical energy conversion and storage using polycrystalline chalcogenide electrodes. Nature 1976 , 261 , 403–404. [ Google Scholar ] [ CrossRef ]
• Lv, J.; Tan, Y.X.; Xie, J.; Yang, R.; Yu, M.; Sun, S.; Li, M.; Yuan, D.; Wang, Y. Direct solar-to-electrochemical energy storage in a functionalized covalent organic framework. Angew. Chem. 2018 , 130 , 12898–12902. [ Google Scholar ] [ CrossRef ]
• Chen, P.; Li, G.R.; Li, T.T.; Gao, X.P. Solar-driven rechargeable lithium–sulfur battery. Adv. Sci. 2019 , 6 , 1900620. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Li, N.; Wang, Y.; Tang, D.; Zhou, H. Integrating a photocatalyst into a hybrid lithium–sulfur battery for direct storage of solar energy. Angew. Chem. Int. Ed. 2015 , 54 , 9271–9274. [ Google Scholar ] [ CrossRef ]
• Liu, Y.; Li, N.; Wu, S.; Liao, K.; Zhu, K.; Yi, J.; Zhou, H. Reducing the charging voltage of a Li–O 2 battery to 1.9 V by incorporating a photocatalyst. Energy Environ. Sci. 2015 , 8 , 2664–2667. [ Google Scholar ]
• Yang, X.Y.; Feng, X.L.; Jin, X.; Shao, M.Z.; Yan, B.L.; Yan, J.M.; Zhang, X.B. An Illumination-Assisted Flexible Self-Powered Energy System Based on a Li–O 2 Battery. Angew. Chem. 2019 , 131 , 16563–16567. [ Google Scholar ] [ CrossRef ]
• Liu, X.; Yuan, Y.; Liu, J.; Liu, B.; Chen, X.; Ding, J.; Hu, W. Utilizing solar energy to improve the oxygen evolution reaction kinetics in zinc–air battery. Nat. Commun. 2019 , 10 , 4767. [ Google Scholar ] [ CrossRef ]
• Ingavale, S.; Gopalakrishnan, M.; Enoch, C.M.; Pornrungroj, C.; Rittiruam, M.; Praserthdam, S.; Kheawhom, S. Strategic Design and Insights into Lanthanum and Strontium Perovskite Oxides for Oxygen Reduction and Oxygen Evolution Reactions. Small 2024 , 20 , 2308443. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Zhao, C.; Zhang, X.; Yu, M.; Wang, A.; Wang, L.; Xue, L.; Wang, W. Cooperative Catalysis toward Oxygen Reduction Reaction under Dual Coordination Environments on Intrinsic AMnO 3 -Type Perovskites via Regulating Stacking Configurations of Coordination Units. Adv. Mater. 2020 , 32 , 2006145. [ Google Scholar ] [ CrossRef ]
• Gholamrezaei, S.; Salavati-Niasari, M. Sonochemical synthesis of SrMnO 3 nanoparticles as an efficient and new catalyst for O 2 evolution from water splitting reaction. Ultrason. Sonochem. 2018 , 40 , 651–663. [ Google Scholar ] [ CrossRef ]
• Choi, S.R.; So, I.S.; Lee, S.W.; Yoo, J.; Seo, Y.S.; Cho, H.S.; Park, J.Y. 3D architecture double perovskite NdBa 0.5 Sr 0.5 Co 1.5 Fe 0.5 O 5 + δ embedded hollow-net Co 3 O 4 bifunctional electrocatalysts coupled with N-doped CNT and reduced graphene oxide for oxygen electrode reactions. J. Alloys Compd. 2020 , 823 , 153782. [ Google Scholar ] [ CrossRef ]
• Bochu, B.; Chenavas, J.; Joubert, J.C.; Marezio, M. High pressure synthesis and crystal structure of a new series of perovskite-like compounds CMn 7 O 12 (C = Na, Ca, Cd, Sr, La, Nd). J. Solid State Chem. 1974 , 11 , 88–93. [ Google Scholar ] [ CrossRef ]
• Long, Y. A-site ordered quadruple perovskite oxides. Chin. Phys. B 2016 , 25 , e078108. [ Google Scholar ] [ CrossRef ]
• Yamada, I.; Fujii, H.; Takamatsu, A.; Ikeno, H.; Wada, K.; Tsukasaki, H.; Yagi, S. Bifunctional oxygen reaction catalysis of quadruple manganese perovskites. Adv. Mater. 2017 , 29 , 1603004. [ Google Scholar ] [ CrossRef ]
• Shigematsu, K.; Shimizu, K.; Yamamoto, K.; Nishikubo, T.; Sakai, Y.; Nikolaev, S.A.; Das, H.; Azuma, M. Strain Manipulation of Magnetic Anisotropy in Room-Temperature Ferrimagnetic Quadruple Perovskite CeCu 3 Mn 4 O 12 . ACS Appl. Electron. Mater. 2019 , 1 , 2514–2521. [ Google Scholar ] [ CrossRef ]
• Aftab, S.; Li, X.; Kabir, F.; Akman, E.; Aslam, M.; Pallavolu, M.R.; Koyyada, G.; Mohammed, A.; Assiri, M.A.; Rajpar, A.H. Lighting the future: Perovskite nanorods and their advances across applications. Nano Energy 2024 , 124 , 109504. [ Google Scholar ] [ CrossRef ]
• Gao, L.; Wang, X.; Ye, X.; Wang, W.; Liu, Z.; Qin, S.; Long, Y. Near-room-temperature ferrimagnetic ordering in a B-site-disordered 3d–5d-hybridized quadruple perovskite oxide, CaCu 3 Mn 2 Os 2 O 12 . Inorg. Chem. 2019 , 58 , 15529–15535. [ Google Scholar ] [ CrossRef ]
• Li, S.F.; Zhang, B.Q.; Li, Y.N.; Yan, D. Regulating the Electronic Structure of Ruddlesden–Popper-Type Perovskite by Chlorine Doping for Enhanced Oxygen Evolution Activity. Inorg. Chem. 2023 , 62 , 11233–11239. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• IR de Larramendi, N.; Ortiz-Vitoriano, I.B.; Dzul-Bautista, T. Rojo, in Perovskite Materials—Synthesis, Characterisation, Properties, and Applications ; Pan, L., Zhu, G., Eds.; InTechOpen: London, UK, 2016; pp. 589–617. [ Google Scholar ]
• Fop, S.; McCombie, K.S.; Wildman, E.J.; Skakle, J.M.; Mclaughlin, A.C. Hexagonal perovskite derivatives: A new direction in the design of oxide ion conducting materials. Chem. Commun. 2019 , 55 , 2127–2137. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Chen, C.F.; King, G.; Dickerson, R.M.; Papin, P.A.; Gupta, S.; Kellogg, W.R.; Wu, G. Oxygen-deficient BaTiO 3−x perovskite as an efficient bifunctional oxygen electrocatalyst. Nano Energy 2015 , 13 , 423–432. [ Google Scholar ] [ CrossRef ]
• Gobeng, R.; Monama, A.B.; Kabelo, E.; Ramohlola, A.; Emmanuel, I.; Iwuoha, B.; Kwena, D.; Modibane, A. Progress on perovskite materials for energy application. Results Chem. 2022 , 4 , 100321. [ Google Scholar ] [ CrossRef ]
• DSchmidt, S.; Hager, M.D.; Schubert, U.S. Photo-Rechargeable electric energy storage systems. Adv. Energy Mater. 2016 , 6 , 1500369. [ Google Scholar ] [ CrossRef ]
• Julien, C.; Nazri, G.A. Solid State Batteries: Materials Design and Optimization ; Kluwer: Boston, MA, USA, 1994. [ Google Scholar ]
• Jasinski, R. High-Energy Batteries ; Plenum: New York, NY, USA, 1967. [ Google Scholar ]
• Julien, C. Design considerations for lithium batteries. In Materials for LIBs ; Julien, C., Stoynov, Z., Eds.; Kluwer: Dordrecht, The Netherlands, 2000; pp. 1–20. [ Google Scholar ]
• Bouguern, M.D.; Madikere Raghunatha Reddy, A.K.; Li, X.; Deng, S.; Laryea, H.; Zaghib, K. Engineering Dry Electrode Manufacturing for Sustainable LIBs. Batteries 2024 , 10 , 39. [ Google Scholar ] [ CrossRef ]
• Yoshio, M.; Brodd, R.J.; Kozawa, A. Lithium Batteries, Science and Technologies ; Springer: New York, NY, USA, 2009. [ Google Scholar ]
• Julien, C.; Mauger, A.; Vijh, A.; Zaghib, K. Lithium Batteries: Science and Technology. MRS Bull. 2016 , 41 , 707. [ Google Scholar ] [ CrossRef ]
• Pandolfo, A.G.; Hollenkamp, A.F. Carbon properties and their role in SCs. J. Power Sources 2006 , 157 , 11–27. [ Google Scholar ] [ CrossRef ]
• Kötz, R.; Carlen, M.J.E.A. Principles and applications of electrochemical capacitors. Electrochim. Acta 2000 , 45 , 2483–2498. [ Google Scholar ] [ CrossRef ]
• Miller, J.R.; Simon, P. Electrochemical capacitors for energy management. Science 2008 , 321 , 651–652. [ Google Scholar ] [ CrossRef ]
• González, A.; Goikolea, E.; Barrena, J.A.; Mysyk, R. Review on SCs: Technologies and materials. Renew. Sustain. Energy Rev. 2016 , 58 , 1189–1206. [ Google Scholar ] [ CrossRef ]
• Tehrani, Z.; Thomas, D.J.; Korochkina, T.; Phillips, C.O.; Lupo, D.; Lehtimäki, S.; Gethin, D.T. Large-area printed supercapacitor technology for low-cost domestic green energy storage. Energy 2017 , 118 , 1313–1321. [ Google Scholar ] [ CrossRef ]
• Zhang, L.L.; Zhao, X.S. Carbon-based materials as supercapacitor electrodes. Chem. Soc. Rev. 2009 , 38 , 2520–2531. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Ahammad, A.S.; Odhikari, N.; Shah, S.S.; Hasan, M.M.; Islam, T.; Pal, P.R.; Qasem, M.A.A.; Aziz, M.A. Porous tal palm carbon nanosheets: Preparation, characterization and application for the simultaneous determination of dopamine and uric acid. Nanoscale Adv. 2019 , 1 , 613–626. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Shah, S.S.; Qasem, M.A.A.; Berni, R.; Del Casino, C.; Cai, G.; Contal, S.; Ahmad, I.; Siddiqui, K.S.; Gatti, E.; Predieri, S.; et al. Physico-chemical properties and toxicological effects on plant and algal models of carbon nanosheets from a nettle fibre clone. Sci. Rep. 2021 , 11 , 6945. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Song, Q.; Chen, J.; Chen, J.; Chen, G. Completely decentralized energy management system for fuel cell-battery-ultracapacitor hybrid energy storage system. IEEE Trans. Ind. Electron. 2023 , 13 , 428–449. [ Google Scholar ] [ CrossRef ]
• Mineo, G.; Bruno, E.; Mirabella, S. Advances in WO 3 -Based Supercapacitors: State-of-the-Art Research and Future Perspectives. Nanomaterials 2023 , 13 , 1418. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Ates, M.; Chebil, A.; Yoruk, O.; Dridi, C.; Turkyilmaz, M. Reliability of electrode materials for SCs and batteries in energy storage applications: A review. Ionics 2022 , 28 , 27–52. [ Google Scholar ] [ CrossRef ]
• Singha, D.K.; Mohanty, R.I.; Bhanja, P.; Jena, B.K. Metal–organic framework and graphene composites: Advanced materials for electrochemical supercapacitor applications. Mater. Adv. 2023 , 4 , 4679–4706. [ Google Scholar ] [ CrossRef ]
• Liu, L.; Niu, Z.; Chen, J. Unconventional SCs from nanocarbon-based electrode materials to device configurations. Chem. Soc. Rev. 2016 , 45 , 4340–4363. [ Google Scholar ] [ CrossRef ]
• Sharma, P.; Bhatti, T.S. A review on electrochemical double-layer capacitors. Energy Convers. Manag. 2010 , 51 , 2901–2912. [ Google Scholar ] [ CrossRef ]
• Bai, Y.; Liu, C.; Chen, T.; Li, W.; Zheng, S.; Pi, Y.; Luo, Y.; Pang, H. MXene-copper/cobalt hybrids via lewis acidic molten salts etching for high performance symmetric SCs. Angew. Chem. 2021 , 133 , 25522–25526. [ Google Scholar ] [ CrossRef ]
• Ke, Q.; Wang, J. Graphene-based materials for supercapacitor electrodes–A review. J. Mater. 2016 , 2 , 37–54. [ Google Scholar ] [ CrossRef ]
• Shi, W.; Zhu, J.; Sim, D.H.; Tay, Y.Y.; Lu, Z.; Zhang, X.; Sharma, Y.; Srinivasan, M.; Zhang, H.; Hng, H.H.; et al. Achieving high specific charge capacitances in Fe 3 O 4 /reduced graphene oxide nanocomposites. J. Mater. Chem. 2011 , 21 , 3422–3427. [ Google Scholar ] [ CrossRef ]
• Hada, H.; Takaoka, K.; Saikawa, M.; Yonezawa, Y. Energy Conversion and Storage in Solid-state Photogalvanic Cells. Bull. Chem. Soc. Jpn. 1981 , 54 , 1640–1644. [ Google Scholar ] [ CrossRef ]
• Yonezawa, Y.; Okai, M.; Ishino, M.; Hada, H. Photochemical Storage Battery with an n-GaP Photoelectrode. Bull. Chem. Soc. Jpn. 1983 , 56 , 2873–2876. [ Google Scholar ] [ CrossRef ]
• Betz, G.; Fiechter, S.; Tributsch, H. Photon Energy Conversion and Storage with a Light-driven Insertion Reaction. J. Appl. Phys. 1987 , 62 , 4597–4605. [ Google Scholar ] [ CrossRef ]
• Kanbara, T.; Takada, K.; Yamamura, Y.; Kondo, S. Photo-Rechargeable Solid -State Battery. Solid State Ion. 1990 , 40−41 , 955–958. [ Google Scholar ] [ CrossRef ]
• Nomiyama, T.; Kuriyaki, H.; Hirakawa, K. Photo-Rechargeable Battery Using New Layer Compound CuFeTe 2 . Synth. Met. 1995 , 71 , 2237–2238. [ Google Scholar ] [ CrossRef ]
• Zou, X.; Maesako, N.; Nomiyama, T.; Horie, Y.; Miyazaki, T. Photo-Rechargeable Battery with TiO 2 /Carbon Fiber Electrodes Prepared by Laser Deposition. Sol. Energy Mater. Sol. Cells 2000 , 62 , 133–142. [ Google Scholar ] [ CrossRef ]
• Hauch, A.; Georg, A.; Krasovec, U.O.; Orel, B. Photovoltaically Self-Charging Battery. J. Electrochem. Soc. 2002 , 149 , A1208. [ Google Scholar ] [ CrossRef ]
• Al-Ezzi, A.S.; Ansari, M.N.M. Photovoltaic Solar Cells: A Review. Appl. Syst. Innov. 2022 , 5 , 67. [ Google Scholar ] [ CrossRef ]
• Floyd, T.L. Electronic Devices , 9th ed.; Pearson: London, UK, 2011. [ Google Scholar ]
• Julien, C.; Mauger, A.; Vijh, A.; Zaghib, K. Lithium Batteries. In Lithium Batteries ; Springer: Cham, Switzerland, 2016. [ Google Scholar ] [ CrossRef ]
• Dahbi, M.; Ghamouss, F.; Tran-Van, F.; Lemordant, D.; Anouti, M. Comparative study of EC/DMC LiTFSI and LiPF 6 electrolytes for electrochemical storage. J. Power Sources 2011 , 196 , 9743–9750. [ Google Scholar ] [ CrossRef ]
• Zaghib, K.; Guerfi, A.; Hovington, P.; Vijh, A.; Trudeau, M.; Mauger, A.; Goodenough, J.B.; Julien, C.M. Review and analysis of nanostructured olivine-based lithium RBs: Status and trends. J. Power Sources 2013 , 232 , 357–369. [ Google Scholar ] [ CrossRef ]
• Zaghib, K.; Dontigny, M.; Guerfi, A.; Charest, P.; Rodrigues, I.; Mauger, A.; Julien, C.M. Safe and fast-charging Li-ion battery with long shelf life for power applications. J. Power Sources 2011 , 196 , 3949–3954. [ Google Scholar ] [ CrossRef ]
• Milot, R.L.; Sutton, R.J.; Eperon, G.E.; Haghighirad, A.A.; Martinez Hardigree, J.; Miranda, L.; Snaith, H.J.; Johnston, M.B.; Herz, L.M. Charge-carrier dynamics in 2D hybrid metal–halide perovskites. Nano Lett. 2016 , 16 , 7001–7007. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Paolella, A.; Vijh, A.; Guerfi, A.; Zaghib, K.; Faure, C. Review—Li-Ion Photo-Batteries: Challenges and Opportunities. J. Electrochem. Soc. 2020 , 167 , 120545. [ Google Scholar ] [ CrossRef ]
• Zhang, C. Solar storage: Two-electrode single systems. Nat. Energy 2017 , 2 , 17079. [ Google Scholar ] [ CrossRef ]
• Yu, M.; Ren, X.; Ma, L.; Wu, Y. Integrating a redox-coupled dye-sensitized photoelectrode into a lithium-oxygen battery for photoassisted charging. Nat. Commun. 2014 , 5 , 5111. [ Google Scholar ] [ CrossRef ]
• Li, Q.; Li, N.; Ishida, M.; Zhou, H. Saving electric energy by integrating a photoelectrode into a Li-ion battery. J. Mater. Chem. A 2015 , 3 , 20903. [ Google Scholar ] [ CrossRef ]
• Wang, Z.; Chiu, H.; Paolella, A.; Zaghib, K.; Demopoulos, G.P. Lithium photo-intercalation of CdS-Sensitized WO 3 anode for energy storage and photoelectrochromic applications. ChemSusChem 2019 , 12 , 2220–2230. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Dokouzis, A.; Bella, F.; Theodosiou, K.; Gerbaldi, C.; Leftheriotis, G. Photoelectrochromic devices with cobalt redox electrolytes. Mater. Today Energy 2020 , 15 , 100365. [ Google Scholar ] [ CrossRef ]
• Maloney, J. From Mineral Exploration to Advanced Manufacturing: Developing Value Chains for Critical Minerals in Canada ; RNNR Committee Report; Parliament of Canada: Ottawa, ON, Canada, 2021. [ Google Scholar ]
• Critical Minerals Data Explorer. Available online: https://www.iea.org/data-and-statistics/data-tools/critical-minerals-data-explorer (accessed on 17 May 2024).
• IEA. Critical Minerals Market Review 2023 ; International Energy Agency (IEA): Paris, France, 2023. [ Google Scholar ]
• Oyewole, O.K.; Oyelade, O.V.; Ichwani, R.; Koech, R.; Oyewole, D.O.; Cromwell, J.; Olanrewaju, Y.; Soboyejo, W.O. Mechanical Properties of Solar Cell Structures, Comprehensive Structural Integrity , 2nd ed.; Elsevier: Amsterdam, The Netherlands, 2023; pp. 185–208. ISBN 9780323919456. [ Google Scholar ] [ CrossRef ]
• Zuo, C.; Henk; Bolink, J.; Han, H.; Huang, J.; Cahen, D.; Ding, L. Advances in PSCs. Adv. Sci. 2016 , 3 , 1500324. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Kojima, A.; Teshima, K.; Miyasaka, T.; Shirai, Y. Novel Photoelectrochemical Cell with Mesoscopic Electrodes Sensitized by Lead-Halide Compounds (2). In Proceedings of the 210th ECS Meeting, Cancun, Mexico, 30 June 2006. [ Google Scholar ]
• Kojima, A.; Teshima, K.; Shirai, Y.; Miyasaka, T. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 2009 , 131 , 6050–6051. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Im, J.H.; Lee, C.R.; Lee, J.W.; Park, S.W.; Park, N.G. 6.5% efficient perovskite quantum-dot-sensitized solar cell. Nanoscale 2011 , 3 , 4088–4093. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Kim, H.S.; Lee, C.R.; Im, J.H.; Lee, K.B.; Moehl, T.; Marchioro, A.; Moon, S.J.; Humphry-Baker, R.; Yum, J.H.; Moser, J.E.; et al. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Sci. Rep. 2012 , 2 , 591. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Yang, W.S.; Noh, J.H.; Jeon, N.J.; Kim, Y.C.; Ryu, S.; Seo, J.; Seok, S.I. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange. Science 2015 , 348 , 1234–1237. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Ball, J.M.; Lee, M.M.; Hey, A.; Snaith, H.J. Low-temperature processed meso-superstructured to thin-film PSCs. Energy Environ. Sci. 2013 , 6 , 1739–1743. [ Google Scholar ] [ CrossRef ]
• Zhou, H.; Chen, Q.; Li, G.; Luo, S.; Song, T.B.; Duan, H.S.; Hong, Z.; You, J.; Liu, Y.; Yang, Y. Interface engineering of highly efficient PSCs. Science 2014 , 345 , 542–546. [ Google Scholar ] [ CrossRef ]
• Bi, C.; Wang, Q.; Shao, Y.; Yuan, Y.; Xiao, Z.; Huang, J. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid PSCs. Nat. Commun. 2015 , 6 , 7747. [ Google Scholar ] [ CrossRef ]
• Dong, Q.; Yuan, Y.; Shao, Y.; Fang, Y.; Wang, Q.; Huang, J. Abnormal crystal growth in CH 3 NH 3 PbI 3−x Cl x using a multi-cycle solution coating process. Energy Environ. Sci. 2015 , 8 , 2464–2470. [ Google Scholar ] [ CrossRef ]
• Etgar, L.; Gao, P.; Xue, Z.; Peng, Q.; Chandiran, A.K.; Liu, B.; Nazeeruddin, M.K.; Gratzel, M. Mesoscopic CH 3 NH 3 PbI 3 /TiO 2 heterojunction solar cells. J. Am. Chem. Soc. 2012 , 134 , 17396–17399. [ Google Scholar ] [ CrossRef ]
• Ke, W.; Fang, G.; Wan, J.; Tao, H.; Liu, Q.; Xiong, L.; Qin, P.; Wang, J.; Lei, H.; Yang, G.; et al. Efficient hole-blocking layer-free planar halide perovskite thin-film solar cells. Nat. Commun. 2015 , 6 , 6700. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Zhang, Y.; Liu, M.; Eperon, G.E.; Leijtens, T.C.; McMeekin, D.; Saliba, M.; Zhang, W.; de Bastiani, M.; Petrozza, A.; Herz, L.M.; et al. Charge selective contacts, mobile ions and anomalous hysteresis in organic–inorganic PSCs. Mater. Horiz. 2015 , 2 , 315–322. [ Google Scholar ] [ CrossRef ]
• Bhattacharyya, R.G.; Mandal, D.P.; Bera, S.C.K.K. Rohatgi-Mukherjee, Photo electro synthesis of Dihyodrogen via water-splitting using S(2-)x as ana anolyte: A first step for a viable solar rechargeable battery. Int. J. Hydrogen Energy 1996 , 21 , 343–347. [ Google Scholar ] [ CrossRef ]
• Büttner, J.; Berestok, T.; Burger, S.; Schmitt, M.; Daub, M.; Hillebrecht, H.; Krossing, I.; Fischer, A. Are Halide-Perovskites Suitable Materials for Battery and Solar-Battery Applications–Fundamental Reconsiderations on Solubility, Lithium Intercalation, and Photo-Corrosion. Adv. Funct. Mater. 2022 , 32 , 2206958. [ Google Scholar ] [ CrossRef ]
• PSCs. Solar Energy Technologies Office ; The US Department of Energy (DOE): SW Washington, DC, USA, 2023.
• Peplow, M. A new kind of solar cell is coming: Is it the future of green energy? Nature 2023 , 623 , 902–905. [ Google Scholar ] [ CrossRef ]
• Volumetric Energy Density of LIBs Increased by More Than Eight Times between 2008 and 2020. Available online: https://www.energy.gov/eere/vehicles/articles/fotw-1234-april-18-2022-volumetric-energy-density-Li-ion-batteries (accessed on 18 April 2022).
• US Department of Energy. Spotlight: Solving Industry’s Energy Storage Challenges ; Office of Technology Transfer: SW Washington, DC, USA, 2019. Available online: https://www.energy.gov/sites/prod/files/2019/07/f64/2018-OTT-Energy-Storage-Spotlight.pdf (accessed on 5 August 2024).
• Pujari, A.; Kim, B.-M.; Sayed, F.N.; Sanders, K.; Dose, W.M.; Mathieson, A.; Grey, C.P.; Greenham, N.C.; De Volder, M. Does Heat Play a Role in the Observed Behavior of Aqueous Photobatteries? ACS Energy Lett. 2023 , 8 , 4625–4633. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Salunke, A.D.; Chamola, S.; Mathieson, A.; Boruah, B.D.; de Volder, M.; Ahmad, S. Photo-Rechargeable LIBs: Device Configurations, Mechanisms, and Materials. ACS Appl. Energy Mater. 2022 , 5 , 7891–7912. [ Google Scholar ] [ CrossRef ]
• Kin, L.; Liu, Z.; Astakhov, O.; Agbo, S.N.; Tempel, H.; Yu, S.; Kungl, H.; Eichel, R.-A.; Rau, U.; Kirchartz, T.; et al. Efficient Area Matched Converter Aided Solar Charging of LIBs Using High Voltage PSCs. ACS Appl. Energy Mater. 2020 , 3 , 431–439. [ Google Scholar ] [ CrossRef ]
• Gurung, A.; Chen, K.; Khan, R.; Abdulkarim, S.S.; Varnekar, G.; Pathak, R.; Naderi, R.; Qiao, Q. Highly Efficient Perovskite Solar Cell Photocharging of Li-ion Battery Using DC–DC Booster. Adv. Energy Mater. 2017 , 7 , 1602105. [ Google Scholar ] [ CrossRef ]
• Bi, J.; Zhang, J.; Giannakou, P.; Wickramanayake, T.; Yao, X.; Wang, M.; Liu, X.; Shkunov, M.; Zhang, W.; Zhao, Y. A Highly integrated flexible photo-rechargeable system based on stable ultrahigh-rate quasi-solid-state zinc-ion micro-batteries and PSCs. Energy Storage Mater. 2022 , 51 , 239–248. [ Google Scholar ] [ CrossRef ]
• Chen, P.; Li, T.-T.; Yang, Y.-B.; Li, G.-R.; Gao, X.-P. Coupling aqueous zinc batteries and PSCs for simultaneous energy harvest, conversion and storage. Nat. Commun. 2022 , 13 , 64. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Cui, C.; Wang, X.; Zhu, H.; Jin, Y.; Li, Y.; Pang, B.; Shang, M.; Dong, H.; Yu, L.; Dong, L. Photo-assisted enhancement of Li-ion battery performance with a LiFePO4/TiO 2 composite cathode. Ceram. Int. 2024 , 50 , 11291–11297. [ Google Scholar ] [ CrossRef ]
• Chen, Y.; Chen, Z.; Zhang, X.; Chen, J.; Wang, Y. An organic-halide perovskite-based photo-assisted Li-ion battery for photoelectrochemical storage. Nanoscale 2022 , 14 , 10903–10909. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Tuc Altaf, C.; Rostas, A.M.; Popa, A.; Toloman, D.; Stefan, M.; Demirci Sankir, N.; Sankir, M. Recent Advances in Photochargeable Integrated and All-in-One Supercapacitor Devices. ACS Omega 2023 , 8 , 47393–47411. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Xu, X.; Li, S.; Zhang, H.; Shen, Y.; Zakeeruddin, S.M.; Graetzel, M.; Cheng, Y.-B.; Wang, M. A Power Pack Based on Organometallic Perovskite Solar Cell and Supercapacitor. ACS Nano 2015 , 9 , 1782–1787. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Li, H.; Chen, C.; Hu, H.; Li, Y.; Shen, Z.; Li, F.; Liu, Y.; Liu, R.; Chen, J.; Dong, C.; et al. Strategies for high-performance PSCs from materials, film engineering to carrier dynamics and photon management. InfoMat 2022 , 4 , e12322. [ Google Scholar ] [ CrossRef ]
• Tewari, N.; Shivarudraiah, S.B.; Halpert, J.E. Photorechargeable Lead-Free Perovskite LIBs Using Hexagonal Cs3Bi2I9 Nanosheets. Nano Lett. 2021 , 21 , 5578–5585. [ Google Scholar ] [ CrossRef ]
• Li, C.; Cong, S.; Tian, Z.; Song, Y.; Yu, L.; Lu, C.; Shao, Y.; Li, J.; Zou, G.; Rümmeli, M.H.; et al. Flexible perovskite solar cell-driven photo-rechargeable Li-ion capacitor for self-powered wearable strain sensors. Nano Energy 2019 , 60 , 247–256. [ Google Scholar ] [ CrossRef ]
• Zheng, D.; Sun, X.; An, C.; Pan, F.; Qin, C.; Wang, Z.; Deng, Q.; Song, Y.; Li, Y. Flexible multi-layered porous CuxO/NiO (x = 1, 2) photo-assisted electrodes for hybrid supercapacitors: Design and mechanism insight. Chem. Eng. J. 2023 , 473 , 145289. [ Google Scholar ] [ CrossRef ]
• Dang, C.; He, S.; Liu, Y.; Zhao, L.; Shan, A.; Li, M.; Kong, L.; Gao, L. Designing In2S3@Bi2S3 type II heterostructure for bifunctional photo-enhanced Li-O 2 batteries. Chem. Eng. J. 2023 , 476 , 146775. [ Google Scholar ] [ CrossRef ]

Share and Cite

M. R., A.K.; Nekahi, A.; Bouguern, M.D.; Ma, D.; Zaghib, K. Advancements and Challenges in Perovskite-Based Photo-Induced Rechargeable Batteries and Supercapacitors: A Comparative Review. Batteries 2024 , 10 , 284. https://doi.org/10.3390/batteries10080284

M. R. AK, Nekahi A, Bouguern MD, Ma D, Zaghib K. Advancements and Challenges in Perovskite-Based Photo-Induced Rechargeable Batteries and Supercapacitors: A Comparative Review. Batteries . 2024; 10(8):284. https://doi.org/10.3390/batteries10080284

M. R., Anil Kumar, Atiyeh Nekahi, Mohamed Djihad Bouguern, Dongling Ma, and Karim Zaghib. 2024. "Advancements and Challenges in Perovskite-Based Photo-Induced Rechargeable Batteries and Supercapacitors: A Comparative Review" Batteries 10, no. 8: 284. https://doi.org/10.3390/batteries10080284

Article Metrics

Article access statistics, further information, mdpi initiatives, follow mdpi.

Subscribe to receive issue release notifications and newsletters from MDPI journals

• You are here:
• American Chemical Society
• Students & Educators
• ChemMatters
• Archive 2013-2014

How a Solar Cell Works

• Resources for Teachers
• Digital Access

A solar cell is made of two types of semiconductors, called p-type and n-type silicon. The p-type silicon is produced by adding atoms—such as boron or gallium—that have one less electron in their outer energy level than does silicon.  Because boron has one less electron than is required to form the bonds with the surrounding silicon atoms, an electron vacancy or “hole” is created.

The n-type silicon is made by including atoms that have one more electron in their outer level than does silicon, such as phosphorus. Phosphorus has five electrons in its outer energy level, not four. It bonds with its silicon neighbor atoms, but one electron is not involved in bonding. Instead, it is free to move inside the silicon structure.

A solar cell consists of a layer of p-type silicon placed next to a layer of n-type silicon (Fig. 1). In the n-type layer, there is an excess of electrons, and in the p-type layer, there is an excess of positively charged holes (which are vacancies due to the lack of valence electrons). Near the junction of the two layers, the electrons on one side of the junction (n-type layer) move into the holes on the other side of the junction (p-type layer). This creates an area around the junction, called the depletion zone, in which the electrons fill the holes (Fig. 1, closeup).

When all the holes are filled with electrons in the depletion zone, the p-type side of the depletion zone (where holes were initially present) now contains negatively charged ions, and the n-type side of the depletion zone (where electrons were present) now contains positively charged ions. The presence of these oppositely charged ions creates an internal electric field that prevents electrons in the n-type layer to fill holes in the p-type layer.

When sunlight strikes a solar cell, electrons in the silicon are ejected, which results in the formation of “holes”—the vacancies left behind by the escaping electrons. If this happens in the electric field, the field will move electrons to the n-type layer and holes to the p-type layer. If you connect the n-type and p-type layers with a metallic wire, the electrons will travel from the n-type layer to the p-type layer by crossing the depletion zone and then go through the external wire back of the n-type layer, creating a flow of electricity.

More about Solar Power

A solar future.

An increasing number of everyday items are powered with the sun, including backpacks, watches, cars, and airplanes. Also, electricity-generating solar power plants may become an alternative to coal-fired power plants and natural gas power stations in the future.

Accept & Close The ACS takes your privacy seriously as it relates to cookies. We use cookies to remember users, better understand ways to serve them, improve our value proposition, and optimize their experience. Learn more about managing your cookies at Cookies Policy .

1155 Sixteenth Street, NW, Washington, DC 20036, USA |  service@acs.org  | 1-800-333-9511 (US and Canada) | 614-447-3776 (outside North America)

• Terms of Use
• Accessibility

Copyright © 2024 American Chemical Society